second hand plant used for sale

The pasteurizer is available with a bottle filler or bag-in-box filling device. Nennpower l/h 180 l/h Electrical power 18 kW Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A width 440 mm Height 1580 mm Weight 43 kg material 1.4301 / AISI 304 Water content 100 l Juice supply 65 l 2 bottle filling valves or filling device for bag in box ; New machine - best condition

two different models available: PA300E = electric pasteur with tube heat exchanger. PA300EA = electric pasteur with tube heat exchanger and automatic temperature control. Rated power l/h 300 l/h Electrical power 27 kW Electrical connection 400V 50Hz (3 phases) Electrical fuse min. 40 A Laenge 750 mm width 500 mm He he 1150 mm Weight 100 kg material 1.4301 / AISI 304 Water content 35 l ; New machine - best condition

For sale is a workshop-overhauled and function-tested, free-standing VA diatomaceous earth dosing device. The device is immediately ready for use. Specifications: Manufacturer: Schenk Year of manufacture: unknown Type: DO-S-250 Boiler capacity: approx. 250 l (with lid almost 1/2 hinged with hinge) Hourly output for KG filtration: 200 hl for beer, wine and fruit juice Dimensions total: L max. = 1.20 m / W max = 0.80 m / H max. = 1.685 m Beer pipe: Input/outlet DN 50 KM/G - Dosing connection in the beer pipe DN 25 KM Connections in the boiler: 1 inlet at the top side DN 50 G with 90-degree bend (inside) downwards 1 remaining outlet DN 50 G with shaft closure and handle from above 1 connection DN 32 KM above 1 DN 50 KM connection at the bottom side with a 90 degree bend upwards - then reduced from DN 50 to DN 10 G Boiler dimensions: Diam. inside = 0.65 m ...

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 600 l/h power heating heater / oil boiler 55 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Oil consumption 6 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1000 l/h power heating heater / oil boiler 90 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 430 kg Oil consumption 10 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1500 l/h power heating heater / oil boiler 140 kW Electrical power 1.8 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm weight 500 / 600 kg Gas consumption flu vinegar gas 11 kg/hr Gas consumption natural gas 15 m3/hr. ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 2000 l/h power heating heater / oil boiler 180 kW Electrical power 1.8 kW Electrical connection 230V 5 0Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm Weight 492 / 600 kg Oil consumption 19 kg/hr ; New machine - best condition

WARTSILA COGENERATION PLANT YEAR: 2007 POWER OUTPUT: 1.50 MW

Hyundai Steel Dangjin Facility (widely known as "Thin Plate Mill") is a premier steel production plant featuring a Compact Strip Process (CSP) as the main production line, complemented by a 150-tonne heat-size electric Meltshop, a thick Slab Caster, and two Skin Pass Mills. Initially commissioned by Hanbo Steel in 1995, this facility was acquired by Hyundai Steel in 2004 including a major modernization in 2011 and more recent upgrades, ensuring its continued excellence in production. Assets Available for Sale: • Electric Meltshop 150 tonnes heat size – DC EBT Electric Arc Furnace, Ladle Furnace, Vacuum Degasser and associated equipment. • CSP – A Thin Slab Cast & Rolling line combining casting, heating, and rolling. 55mm thickness slabs directly enter a tunnel furnace and are rolled in a Hot Strip Mill for final strip thickness from 1.4 to 16mm and up to 1,560mm width ...

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 500 l/h power heating heater / oil boiler 45 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Gas consumption flu vinegar gas 4 kg/hr Gas consumption natural gas 5 m3/hr. ; New machine - best condition

Resin production plant. Capapcity 1200 tons per month. Plant can produce acrylic resins, alahide resins, poliuerethane resins on  buthyl octate base, acetone base, and xylane base. Plant can produce 55-60% resin concentrate wchich acan later be diluted in another factory. Plant has 3 main pressure reactors each 10 ton of batch. Plant has a storage tanks 160000 L tanks. Plant is build in Atex execution. More information available upon request. Advise on resin production technology, recepies and technological advise is possible on separate agreement and price. Below you can find a photo gallery of the factory, more information please call.

Rated power: up to 400 l/h (80C pasteurtemp., 10C input temp. Juice) Thermal power: approx. 35 kW Electrical power: 1.4 kW Electrical connection: 230V 50Hz (1 phase) Electrical fuse: 16 A Laenge: 910 mm Width: 960 mm Height: 1850 mm weightweight (heating circuit emptied):260 kg weight (heating circuit filled): 360 kg Heating heater consumption: approx. 3.5 liters/h exhaust gas connection: 150mm Max. Exhaust temperature: 180C sound power level (LW, A): 83dB; New machine - top condition

Availability: immediately Hours: 0 Cup-Cake dosing line suitable for the production of round CUP-CAKES Ø 45 - 90 mm and small cakes (muffins, Magdalenas, Cake-Donuts, Mini-Cake Donuts, cake bars etc.) arranged on trays measuring 400x600 mm, with 6 x 9 wells. DESCRIPTION OF THE MACHINE: PART 1 No. 1 conveyor belt with plate chains, which is positioned at the entrance of the dosing line and serves as a buffer for about 4 sheets, with the following characteristics: ● Infinitely variable movement by means of a motor with frequency converter. ● Usable width: 600 mm. ● Length: 1500 mm. ● Mounted on wheels. PART 2 No. 1 Intermittent chain conveyor with slides, with the following features: ● Adjustable guide walls. ● Drive with a motor with frequency converter. ● Intermittent movement, electromechanically controlled, with programmable conveying step. ● Acceler ...

Specifications: Support surface table: Width x Depth x Max. Clamping Distance: 192 x 115 x 120 mm Height center cutting wheel above table: 520 mm Cutting disc height adjustment via Cylinder with measuring system: 445 mm Cutting Wheel Dimensions: Min.: 350 x 2.8 x 32 mm Max.: 400 x 4.0 x 32 mm Workpiece dimensions max. length: Workpiece feeder: 3500 mm Workpiece discharge: 2000 mm Workpiece dimensions min. length: Workpiece feeder: 300 mm Workpiece discharge: 300 mm Workpiece feeder: Servo - controlled Measuring distance via measuring system: 3500 mm Circumferential speed: 25 - 60 m/sec Main motor: 10 kW Dimensions of separation system (WxDxH), approx.: 850 x 1600 x 2815 mm Weight: Machine: 980 kg Workpiece feeder: 380 kg Workpiece discharge: 350 kg Control cabinet: 280 kg

Bag-in-box filling - also with 6-digit row filler available nominal power l/h 750 (at 10l bags) l/h Electrical connection 230V 50Hz (single-phase) Electrical fuse 16 A Laenge 1030 mm Width 7 40 mm Height 1065 mm Weight 85 kg material 1.4301 / AISI 304 Filling accuracy of 0.5% compressed air connection 6 bar connection for juice supply 21.3 Juice storage capacity 58 l Supplied incl. cleaning adapter ; New machine - best condition

Complete chocolate production plant, plant components: - Beetz MK 2/500 chocolate mixer, refurbished 2023 with new electrics and new dust filter. Connecting belt to the 3-roll mill - Bauermeister DW 51 three-roll mill, refrubished 2023 with new electric and water station, connecting belt to the 5-roll refiner - Bühler SFG 1000 five-roll mill, refrubished in 2023 with new electric and water station, connecting belt to the conche - Frisse DÜC 1R Conche, refrubished 2023 with new electrics and new metal sieve separator - RF Block Melter/Fat Melter, new 2023 - RF bag feeding station (suction conveyor system), new 2023 The entire system is dismantled and stored in our warehouse in Germany. Documentation available. The facility is sold in existing condition, free loaded truck, packing and/or, container stowage are not included in the price

New machine with 3 x 800 ltr. Tanks Heating system: with steam through heat exchanger The whole system is disigned to enalbe sterilzation and cleaning of filler without disassembly of parts or components Technical data: - Output pressure: 4 bar - Temperature of feed water: 15-20oC - Steam Pressure: 3 bar - Steam flow: 300 kg/h - Temperature of steam: 120-130C - Pressure of air: 6 bar - Installed electrical power: 4 kW

Fine grinding plant consisting of: Alpine 630 AFG fluidized bed counter-jet mill (V ges: 885 dm3, 10 bar pressure-shock-resistant, saerterrad fold-out), feed station, cyclone, 2 pcs. EX-protection valve, control cabinet and 4 pieces of product buckets. Previous use: Grinding of toner. The system can be inspected in a disassembled condition. Available at an additional cost: Dust filter Bühler PGFG 60/18 (39 m2 filter area).

Distillation plant for WFI water or pure steam generation Manufacturer : DEWA Type: DP 30 EVS Technical specifications : Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg Documents: available

We provide the following to the purchase : Itemnumber: 8868 Plant Cover 12mx16m The photos show an almost identical system. for more information please contact us. please keep the item number ready Shipping costs pls contact us; Second Hand

Extraction plant

BRIKOL BT 1000 granulation line was built in 2019 in Poland by BRIKOL Sp. z o.o. (first launch in 2020). This extremely efficient and energy-saving system is designed for the production of pellets from various types of raw materials, i.e. wood waste, sawdust and bran. It features a number of components with the best technical parameters, which enable the entire production process to be performed fully automatically. In this way, the problem of waste disposal in the carpentry and sawmill industry can be solved while at the same time making a profit. The BRIKOL pellet production line is fully complete and has the following components: – MB37 hammer mill – drum dryer – kiln – pellet mill – pellet sifter – sawdust conditioner – tank – flight conveyor (2 pcs) – screw conveyor – binder hopper – cooling device – control cabinet with display and computer  ...

Parts: -Pelvis -Trolley -Filter -Rectifier -Product carriers -2x supply air system -3x exhaust air system -Refrigerator Specifications - 1 (line) - 1 x (wet turner) Cr Active - 111 Deco Chrome 112, 113, 114 Standing Sink 114 Sinks 116,117,118 Hot Rinsing 123 Dryers 124, 125, 126, 127 Speicher 129 - 141 Unloading Correction Station 142 - 150 El. Stripping 151 - 154 Sinks 155, 156 Stripping Nitric 157 - 161 Sinks 162, 163 Warm Rinse 164 Dryer 165 Speicher 166 - 172 Loading Correction Station 173 - 181 Memory 182 - 209 - - 2 (Line) Sinks 394, 393 PNS 392 Sinks 391, 390 MPS 389 Sinks 388, 387 Free court 386 Satin 385 - 383 Sinks 382 - 378 Gloss NI 377 - 374 Half Gloss 373 - 370 Bdobqwaov Ernfoltljg Sinks 369 - 367 Decapitate 366 Anodes 365 - 363 Sinks 362, 361 Copper 360 - 349 Sinks 348 - 346 Chem. Ni 345 - 342 Sinks 341 - 339 Accelerators  ...

Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete document ...

1 wastewater treatment plant for the treatment of industrial wastewater The wastewater load of approx. 136m³ / day from the albi fruit juice Production ranged from 2,000 mgO2/l to 8,000 mgO2/l Running time 24 hours, input approx. 5.6 m³/h, COD degradation up to 975 kg COD/day The complete wastewater treatment plant consists of the following components: A.) 1 free-standing company building to accommodate the 3 rotary lobe blowers an exhaust fan and control system S 7, in 5 control cabinets and 1 small control laboratory B.) 1 drain and measuring shaft, can be entered with stepladder inside of the operating building with 3 chambers for the regulation of the Equipped with Ind. flow meter from Endress & Hauser in DN50, max. effluent volume of activated sludge with solids content smaller than 1% with 0- 3 l per sec C.) 1 blower station with 3 sonically encaps ...

The complete conveyor technology is from CSF. The control system of all system components including a visualization, all control cabinets, all FUs and many other components have been completely renewed in the last 5-7 years. The plant was decommissioned in Q1-2025, but can be restarted at any time if necessary. All system components are on standby and can be immediately put into operation and presented to a potential interested party. The system has one hand and two automatic cabs. The complete part size 7000x2300x800 mm can be moved and coated across all cabins. The system is designed in such a way that all 3 cabins can coat at the same time. Hanger throughput approx. 14 hangers per hour Water dryers as well as powder dryers are each heated indirectly via an oil-air heat exchanger. The system has no maintenance backlog and has been regularly maintained by our own maintenance ...

Concentrate plant 6000 l /h 3 stage system with plate heat exchanger For malt extract and apple juice concentrate

Qty. 1 Second-hand cast house for billet production incl. filtration system Mfc.: Gautschi, Mechatherm, Weishaupt, PEHAKA, FISONS, Dantherm Filtration GmbH Built: Unknown The machine is very strong design and still running well because it has been maintained always with original spare parts and qualified experts. Direct casting on a vertical table and make billets of 6'' and 8''. To make 9'' the tool of the table can be modified. The vertical caster can work with 9'' by remachining and modifying the tool table. 1 Melting and Tilting furnace GAUTSCHI, Capacity 20 T, Fuel Oil Burners The furnace has an elevator charging machine to load the scrap from the top of the furnace Degassing unit FILD from MECHATHERM England Nitrogen treatment and filtering 1 Vertical caster for billets 26 x 6’’ and 20 x 8’’ for useful log length 6 m 1 Homogenizing furnace, Fuel Oil Burners Weish ...

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Availability: immediately Location: near Dresden 1 apricot system (temperature control to + 95°C) - Working width approx. 800mm - Overall length approx. 2000mm - Working height approx. 870mm +/- 50mm with stainless handlebars.- Brake castors - Stainless steel frame construction in stainless steel 1.4301 – glass bead blasted - Conical drip plates – return flow apricot tub - Round cord belt transport 2-part with belt stripping in the return - Drive.- Deflection waves stainless steel 1.4301 with driven transfer shaft - Drive station SEW (7-20m/min.) - Stainless chassis with mounted apricot tray approx. 80 Lt. version double-walled with thermal oil filling and electric resistance heating. (Pre-tempering to approx. 60º C). Level query with acoustic signaling. - Product delivery via OMAC rotary lobe pump with downstream instantaneous water heater (electrically for tempe ...

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

Fettbackstation / Berliner Backstation consisting of 4 fat pans 1x Donut Filler 1x large exhaust hood incl. fire extinguishing function

A Complete Turnkey Solution: ‘FIVES DMS Montbard & SMS MANNESMANN MEER’ 8" Seamless Tube Plant Once known as Vallourec Bearing Tubes Montbard, this facility can produce hot and cold rolled seamless high precision tubes up to 203 mm OD and 2 to 55 mm wall thickness based on a long-established state-of-the-art manufacturing process. Make (main): · FIVES DMS MONTBARD · SMS MANNESMANN MEER Mothballed since: 2025 Capacity: 80,000 tons per year Processed material: CrMo, CrMn alloyed steels Starting material: 80 – 240 mm round billets End products: o Hot Rolled Tubes up to 203 mm OD; 8.0 - 53 mm WT o Cold Rolled Tubes 25 - 102 mm OD; 2.0 - 20 mm WT Consists of: Billet Yard Hot Rolling Mill incl. Furnaces, Piercer, Elongation, Calibration, Sizing mill, Cooling bed (7) Cold Pilger Mills Heat Treatment Furnaces incl. Quenching ...

Qty. 1 Second-hand vertical electrostatic powder painting line for Aluminium profiles – still in production Mfc.: SAT, GEMA, Siemens Built: 2017 Type: vertical powder coating line Profile dimensions: 7000 x 100 x 200 mm - H x W x L Weight of profiles: 30 kg/each max. Max. productivity: 676 pcs/h Conveyor speed: 1.5 m/min. Hanging pitches: 66, 100, 133, 200 mm Total electric power: 215 kW, 400 V, 3ph., 50 Hz Total thermal power: 350.000 kcal/h Compressed air – pressure required: 7 bar Water flow rate required: 500 – 1000 L/h Scope of supply: Pre-treatment tunnel Tunnel main tank made from PP Drying oven Curing oven V- shaped painting booth Vacuum cleaning unit Aerial conveyor Control panel

Loading / loading for boilers or similar in a very good used and functional condition. Custom order / manufacturer unknown. Completely made of stainless steel, rollable, including basket, basket size B/D/H 105/85/70 cm. Dimensions W/D/H 170/100/250 cm. Workshop tested, ready for use. More on request.

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

6,000 l / h product 3 Stage system, with plate heat exchanger and heat recovery Control S7

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

-for long rolling of breads -without nameplate -in baker's condition -Photos before cleaning

R&E Conveyor No 2618 Y.O.M. 1998 Width 2x 650 Length 16 m Curved, head approx. 6 m Good condition!

Bread-long wrapper W&P BM 51 B -with blue plastic straps -mobile on wheels -for bakery baking industry