second hand plant used for sale

Manufacturer: KONECRANES Model / Type: SMV6/7ECC90 Year of manufacture: 2015 Condition: In normal working condition Specifications: - Operating hours: 35,855 h - Total machine weight: 36,300 kg - Capacity under spreader: 9,000 kg - Lifting height under spreader: 19,005 mm - Max. boom height (lowered / raised): 10,430 mm / 19,245 mm - Telescopic boom tilt (F/R): 2° / 4° Engine & Drivetrain: - Engine: VOLVO PENTA TAD 871VE – 185 kW @ 2200 rpm - Gearbox: ZF 4WG 191 - Drive axle: Kessler D81 P488-NLB6340 Dimensions & Structure: - Overall length: 6,600 mm - Cab height: 3,900 mm - Wheelbase: 4,500 mm - Turning radius (40’): 8,425 mm Axle loads: - Front axle: 23,600 kg - Rear axle: 12,700 kg Auction-ID: A7-45668-10

Auction-ID: A1-45411-76

Auction-ID: A1-45411-78

With sturdy bearings and wheels for easy movement Auction-ID: A3-43511-5792

Approximate dimensions: 1350x800xh1500 mm Estimated weight: 100 kg Auction-ID: A7-44996-121

Hand wash basin Blanco with sensor technology, type HAU-PS 5x7, 2 in 1, hot + cold connection, 1 x faucet with motion sensor, 230 V - 50 HZ Auction-ID: A7-45677-126

Size: about 1000x700x1200mm Weight: approx. 100 kg Auction-ID: A7-44996-134

CE Harmonized Estimated Weight: 40kg Approximate Dimensions: 1350x800x1500mm Auction-ID: A7-44996-122

Heavy duty cart trailer trailer – 12 meters Length : 12.020 mm Width : 2510 mm Height : 590 mm Own weight : approx. 5500 kg Total length incl. drawbar : 14.350 mm - Double steering of the wheels - Wooden bottom Auction-ID: A1-42013-53

Please note, spoons are wider than normal (67cm), spoon length 112cm Auction-ID: A1-41992-83

Incl. trolley, consisting of hand tools in various sizes and designs Auction-ID: A1-45714-13

Brand : Hedin Lagan AB Type : Forklift heavy duty bed trailer Dimension l : 620 cm Dimension w : 235 cm Dimension h : 95 cm Auction-ID: A1-42013-52

Qty 2, Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-35

Qty 2, Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-132

With 4 stroke Honda engine. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-83

Qty 2, Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-133

Fork width 540mm. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-37

With 4 stroke Honda engine. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-82

Lot comprising a quantity of factory hand tools, engineering measuring tools, thickness measuring tools and office supplies. Auction-ID: A1-45187-124

Hand lever shear on steel fabricated trolley, ANR 25 Auction-ID: A1-45187-222

Palette 2000 hand sanitizer 100 ml plus 3000 protective masks Auction-ID: A1-45282-212

Various hand tools including: files, hammers, various sizes of spanners (\"46,\"41,\"36,\"32,\"30). Pallet included. Auction-ID: A1-45383-46

Various hand tools including: different sizes of spanners (\"46,\"32\"16,\"17,),hand saws, files and Atexor led drivers. Auction-ID: A1-45383-48

Various hand tools including: clamping pliers, hand saws, spirit level, various sizes of spanners including \"32,\"27. Pallet included. Auction-ID: A1-45383-44

Set of 96 hand sanitizer, pocket size, 100 ML date passed valid 24 months after opening Auction-ID: A1-45282-164

Various hand tools including: block hammers, lock hammers, files, flat screwdrivers, spirit level. Pallet included. Auction-ID: A1-45383-52

Set of 96 hand sanitizer, pocket size, 100 ML date passed valid 24 months after opening Auction-ID: A1-45282-195

Various sizes of open-end wrenches including: (\"32,\"27,\"19,\"17,\"15,\"14,\"13 to \"11). Pallets included. Auction-ID: A1-45383-45

Various hand tools including: wire brushes, level, chipping hammers and various sizes of spanners (\"34,\"22,\"19). Pallet included. Auction-ID: A1-45383-47

Equipped with outriggers, hydraulically liftable cabin, solid rubber tires, cabin protection, extra functions, work lighting, automatic grease lubrication, tree grabber, maximum spread grab 2860 mm, rotator, Auction-ID: A1-42370-1

Various hand tools including: 3 bins with different sizes of spanners (\"34,\"27,\"23,\"21. Pallet included Auction-ID: A1-45383-51

Various hand tools including: different sizes of open-end wrenches (\"46,\"41,\"36,\"22),breakers,different types of files and chisels. Pallets included. Auction-ID: A1-45383-50

Various hand tools including: 3 cases with hand saws and block hammers, wire brushes, files, screwdrivers, On and including pallet Auction-ID: A1-45383-49

A complete malt and grist handling system comprising malt reception, malt preparation, malt storage, grist milling and various conveying systems., Additional title: Raw material handling for malt and grist, Features: Malt reception, malt cleaning: dustremoval, destoner, vibrator, storage: 4 maltsilos (3 x 25 t, 1 x 6 t), malt scale (reception) screw conveyors, malt scale (removal), conditioning, 6 roller mill, milling body

Y&J:1984, 3 silos, 800 mm diameter x 1400 mm total height, with manhole lids, 3 vibration discharge floors; Inlet: 800 mm, outlet: 168 mm, height 570 mm, 1 suction filter with sack shake, filter area: 2.3 m2, 3 blow-through locks for conveyor system.

Composite plant Fabrikat Linde,with 3 pcs.Bitzer compressor type.4EC 4.2Y 22.7m3/h. 40Kw.at minus 10 degrees evaporation temperature.

Earth tank, storage tank, steel tank - brand new for the storage of HEL with 50,000 litres capacity, according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. Dimensions: D = 2.50 m - L = approx. 10.80 m - weight approx. 9.3 tons. Incl. a walk-in dome shaft, multi-part, according to DIN 6626, height-adjustable from approx. 850 mm to 1,050 mm, as well as a walk-in cover, galvanized + tagwaterproof. Containers ex works, freely charged. Additional price for a navigable dome shaft according to DIN 6626 General: You will receive an invoice with VAT shown. The purchase is made on our general terms and conditions. Further tank systems (new and used) as well as rental systems are also on offer ...

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 25,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 8,390 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank ...

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

Tank Tank Plant Storage Tank Diesel Filling Tank Heating Oil Tank Tank System Diesel Tank Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 30,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Leng ...

Cat.-Nr. 11-3315 in a very good condition for Cosmetic and Food Stuff Pressure Tanks with Agitator: Total Capacity: 13.320 Litres – capacity for use: 10.000 Litres Manufacturer: Schwarz Year of Construction: 1999 Material: dished bottom and jacket: 1.4539 flange for agitator, spout and cup sleeve for temperature sensor: 1.4539 other Stutzen: 1.4571 insulating jacket and pipe legs: 1.4301 (V2A) Attachments: 1.4404/1.4571 Seals: Viton Operating Instructions available For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1 piece plasma nitriding system Manufacturer: 1 piece used plasma nitriding system (tandem system) Dimensions: Diameter 1500 mm x 1000/2000/3000 mm (depending on whether 1/2/3 segment attachments be used) El. Connection value: 280 kVA It also includes an N2H2 fumigation device as well as an ammonia container. The plant was renewed in 2005. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded ...

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

The first arrangement which earns the name MINIgranulieranlage really. Completely instal on a stage with the compact measuring of 1,500 x 1,400 mms and a whole height of 2,300 mms the most compact one is of this arrangement probably what presently at the market is available. With a whole achievement admission of 6.22 kW can be processed up to 100 kg of mixing cable per hour. equipped with the proven dry dividing technology this arrangement is conceived in particular for the processing to budgetary cables. On this occasion, metal-sided you receive cleanness from 99.9%. Plastic-sided the metal losses on

Cat. No. 10-1070 New Complete continuous distillation and rectification plant (DRA) for the production of 10,000 Ltr/day - Fab.Eurolux Fine sprite or neutral alcohol made from starchy and sugary raw materials For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

complete debarking plant Matelest, including mechanisation and control station. Type EM90 Infeeding up to 40 m/min. Motor 37 kW Log diameter 100-900 mm 4 hard netal knifes Continiursly reconditioned. Very good condition.

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width  ...