We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,948 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
AUTOMATIC GUILLOTINE type TAGLIABUE TIA 3050 second hand hydraulic cutting system Cutting length mm 3020 Pressor stroke mm 110 Electrical rear feed - Max rear feed width mm 1250 - min rear feed width mm.23 Hydraulic unit motor power Hp 10 Rear feed motor power Hp 0.75 Safety photocells Weight kg 4000
used
Stock# UG6244 Second hand, little used, vertical storage tank designed in PP by Polplast Gliwice (PL) with working volume 30000 l. Diameter 300 cm x Height 500 cm.
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...
new
Braking resistor, original packaging, ERBG012R01K9 Lenze, new Attention: Original Lenze product - No replica from… - incl. manual Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Function warranty! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.
used
Stock# UG6243 Second hand powder filling machine by Coffe Service (PL) type Cofpack AN Doypack C300. Machine is pneumatically driven. Working output up to 20 pcs/min. Power supply 1.5 kW. Compressed air consumption up to 30 m3/h at 6 bar. Machine works on ready for use bags with string, designed in laminated film (doypack type). Machine collects bag, opens it, fill it, closing and welding, pushes away. Machine doesnt include powder feeder. Shipping dimensions: L 1700 mm x W 500 mm x H up to 1800 mm x weight 300 kg.
new
Centrifugal pump, CRI5-2A-CA-I-E-HQQE, 9/14,3m, 5,8m³ Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, ...
new
Centrifugal pump, CRI10-02 A-CA-I-E-HQQE, 15,3/20m, 10m³/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertikale, mehrstufige Kreiselpumpe. Die medienberührten Bauteile der Pumpe sind aus hochwertigem Edelstahl. P: 0,75 KW, H: 15,3m, Hmax: 20m, Q: 10m³/h Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will re ...
Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm
used
Surface grinders - horizontal ELB-SCHLIFF SWBE 10 PLC Second-hand machine Mint Control cabinet, motors, wiring, control new Hydraulic new, trim, loop length: 1000 mm Grinding width: 500 (600) mm Workpiece height: 600 mm Table size: 1000 x 550 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 5-35 m / sn Total power: 18 kW Machine weight approx.: 5,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General outrun 2019 with 12 month warranty Paper machine Levelling feet Installation included Instruction includes
used
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Aasted Type: AT 2000 disc tempering machine for chocolate YOM: 1971 output: from 750 to 2.000 kg/hour. electrical: 380/400 VAC different: working order I offer this machine in as-is where-is condition
used
Description Brand Kett Model Riceter J301 ID 7328 Status Active Price 500 € + VAT Location Oradea (RO) Handheld Portable Moisture Tester - Rice, Wheat, Barley, Oats. The largest selling moisture meter in the world, the Riceter sets the standard for handheld grain testers. To operate, place several grains of rice, wheat, barley or oats in the sample holder. Insert the holder and twist the integrated grinder. The sample is measured using the capacitance circuit and the moisture percentage is displayed on the bright red LED. Testing takes less than five seconds, allowing for rapid analysis of many samples. There is up to nine consecutive measurements that can be displayed and averaged. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs be ...
used
Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price ! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase ...
Qty. 1 Second-hand extrusion press Mfc.: SMS - Hasenclever Force: 2500 MT Built: 1990 Container for flat billets Width: 375 mm Height: 140 mm Billet length: 1000 mm Stem length, max.: 950 mm Consist of: Extrusion Press Body Cylinders Motors Hydraulic tank Qty. 2 Containers (8” & 9”)
Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm
used
Used production hall, with the internal dimensions of around 48x36m and a usable area of around 1,731 sqm, dismantled from stock. In its second life cycle, this hall construction could be used to build a workshop, production hall, warehouse, etc. HALL STRUCTURE: Shed roof steel construction made of hot-rolled and primed/painted profile steel on reinforced concrete supports. The longitudinal stiffness of the hall is achieved by wind bandages in the roof plane and vertical bandages in the side walls. The roof substructure consists of steel trapezoidal sheet metal support shells. Hall width: approx. 36.30 m inner edge wall; Hall length: approx. 47.70 m inner edge wall; Building height: approx. 9.00 m upper edge roof; ROOF: roofing felt, thermal insulation, supporting shells made of steel trapezoidal sheet; WALL: the façade of the building consists of suspended 30 cm aerated concrete ...
Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)
used
3″ x .125″ Oto Mills – Someron HF Tube Mill Make (Entry Section): Oto Mills, Make (Forming & Sizing): Somenor, Maximum Pipe Diameter: 76mm, Wall Thickness: 0.8mm – 3mm, Shaft Diameter: 60mm Direction: Right to Left. Abbel Jib Crane, Mandrel Uncoiler, Weight Capacity: 10,000Lb, Powered Mandrel Expansion. Automatic Shear & End Welder, Hydraulic Shear, Automated Torching Head, Vertical Otto Mills Accumulator with DC Motor Drive, Driven Entry & Exit Guiding Rolls, Driven Entry Pinch Rolls, Adjustable Edge Guides, 5-Roll Coil Flattener. Forming Mill with Six Forming Stands, Seven Side Stands, Individual Gear Boxes, Universal Drive, Complete Set of Second Rafted Forming Stands, Motor: 60HP DC Drive. Welding Section with Emmedi 200Kw High Frequency Welder, 3-Roll Mechanical Squeeze Box, ID Scarfing Head, Powered Bead Re-Winder, Extended Cooling Section. Sizing Mill with Four (4) Sizi ...
Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys
new
Second-hand tool trolleys including tools as well as additional storage compartments
used
Steam degreaser Fabr. RFT Cleaning and filter technology Type CLEAN MASTER CM 200-0 NTwith control program RDEP 60 for S 5 100 UTechnical specifications:Working space:Length: appro:. 2200 mmWidth: approx: 890 mmHeight: approx: 1150 mmDesorption temperature: approx: 80 - 180 degreesSteam level - Temperature: approx: 50 - 100 degreesSpraying device approx: 10 secondsP max: 14 kWL x W x H approx.: 4500 x 2100 x 1800 mmWeight: approx: 2500 kgWith- Control program RDEP 60 for S 5 100 Uused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Qty. 1 Second-hand sawing machine Sawing machine Mfc.: Kaltenbach Type: HDM 1431 Built: 2005 General description of HDM 1431 Can cut all types of profiles (quite thick profiles as well) with a straight or angled cut. Generally, angles are not cut with this saw, except for large sections by positioning the V against the bottom. Technical details: Profiles: Height: 50-400 mm Width: 50-1000 mm Cut at 90° min. length: 50 mm Cut at 90° max. length: 24200 mm Cut at 55° min. length: 3900 mm Cut at 45° min. length: 2900 mm Hard blade: Dia.: 1430 mm Thickness: 9.5 mm
used
Vertical band saw machine make PEHAKA type SH 9 spec.Masch. -No: 276361390Technical specifications:Roll diameter: 900 mmCutting height (lower guide): 520 mmCutting width: 880 mmTable size without rear table: 850 x 900 mmBelt speed: 1650 m / minlarge sheet length: 6250 mmMotor power: 7.5 HPWeight approx: 1100 kgWith- Leadership under the table- Table adjustment by handwheel 5 ° left 45 ° to the right according to the scale, 1 ° division Clamping and releasing with a foot pedal- Scale with 0.1 ° division- auto-electr. Brake switch that automatically cuts the saw band when the machine is switched off. stops within 10 seconds- Blade tension indicator- Cut-off and miter ruler with degree scale can be swiveled awayusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would ...
new
Description: -Powerful, fully hydraulic cordless saw -Lifan motor with electric starter, feed and conveyor belt -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch, belt width 150 mm Technical specifications: Engine: 188F LIFAN petrol engine Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 3800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 3.2 inches Duty cycle time: 7 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
Qty. 1 Second-hand double stand cold rolling mill stand Mfc.: SMS/Germany Type: 4-Hi Double Stand Cold Rolling Mill Built: 2009 Stopped: 2017 Capacity: 800,000 Ton/Year Annual running: 6480 h Strip width: 800 – 1650 mm Thickness entry: 1.8~5.0 mm Exit: 0.3 – 2.5 mm Coil OD: 1000~2200 mm Coil ID: 610 mm Coil Weight: Max. 30 T Line Speed: max. 1350 m/min Threading Speed: 30 m/min
new
Description: -Powerful, fully hydraulic wood saw with electric motor -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch and a hydraulic feed table 180cm with an electromagnetic switch Technical specifications: Motor: 7.5kW, 50Hz, 380V, 3-phase Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 4800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 4 inches Duty cycle time: 8 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
new
Description: -Powerful, fully hydraulic cordless saw -Lifan motor with electric starter, feed and conveyor belt -Hydraulic feed and conveyor belt 320 cm long and 15 cm wide -The conveyor belt is lifted and lowered with a winch -The length of the firewood can be set as desired. The maximum length is 30 - 57 cm, diameter 37 cm -The price includes a 3.2 meter conveyor with a winch and a hydraulic feed table 180cm with electromagnet. switch Technical specifications: Engine: 188F LIFAN petrol engine Weight: 520 kg Max. log diameter: 38 cm Max. log length: 55 cm Engine speed: 3800 rpm Chainsaw: 18 inches (STIHL) Cylinder bore: 4 inches Duty cycle time: 8 seconds Tires: 12 inches Splitting wedge: 4-handed (optional 6-handed) -This machine is available right away. -For shipping information contact us directly.
Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc
used
Special lathe for turning turbine shafts / large pulleys / large rotors / large pistons Type: DS 2000-13/IV Lathe is equipped with 2 cross-slides: - one is mounted on a chassis bed installed next to the main chassis of the lathe - one is mounted on an upper chassis bed on top of the main chassis of the lathe - the upper chassis bed is also movable on top of the main chassis of the lathe Max length of workpiece on main chassis: 13 meter Max length of workpiece on top of upper chassis bed: 6,5 meter Max swing in gap using main cross-slide: 4000 mm Max swing over bed usingnbsp;using secondary cross-slide: 2700 mm Max swing over cross-slide: 2220 mm Distance between centers: 13 000 mm Swing over bed: 4000 mm Swing over cross-slide: 2220 mm Diametre of main spindle bore: 95 mm Power on main spindle: 70 kW Weight: 130 ton Max weight between centers: 100 ton
used
Second-hand Hybrid forklifter LPG gas and petrol Loading capacity 3,000kg Engine K25 Japan Long forks 1.820mm lifting height 3,000mm solid tyres Colour red Including.: Duplex mast, side shifter, seat belt, rain cover, toolbox, manual
new
Cable Extension Sensors, Posiwire WS7.5-10000-HPROF-SB0, ASM, new Manufacturer: ASM Type: Posiwire WS7.5-10000-HPROF-SB0 Measure length 10000mm Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.
new
Cable Extension Sensors, WDS-40000-P200-M-S0, Miro Epsilon, new, Manufacturer: Micro Epsilon Type: WDS-40000-P200-M-S0 Measure length: 40000mm including test report Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.
new
Vortex Flowmeter 8800, F020SD1N3D1I1M5, Rosemount, EEx, new Manufacturer: Rosemount Type: Vortex 8800, F020SD1N3D1I1M5 Ex protected Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.
used
We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,208.8 mm Center-center hole: approx. 1,168.8 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Qty. 1 Second-hand slitting line Mfc.: Kampf Built: 2001 Re-Installed in 2016 under power – no production! Material Processed: Al. Alloys 1145, 1100, 3003, 7072 and 8111 Temper: 0 Thru H19 Strip Width: 635 - 1753 mm (25" - 69") Thickness: 0.05 - 0.381 mm (0.002" - 0.015") Slitting Width: 15.8 mm - 1169 mm (0.6" - 46") Max. 40 Cuts Plus Edge Trim According to Kampf, this Line will run Can Lid Stock: 0.93 mm (0.037") and "O Temper" Dead Soft Aluminum at 2.06 mm (0.081") with Knife Modifications. Line Speed Max: 800 m/min. (2600 Ft/min.) depending on material type, thickness, etc.
used
We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,249.2 mm Middle-center hole: approx. 1,209.2 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min
used
For sale is a laser cutting machine TruLaser 3530. technical data: Additional details - Operating hours: Beam-On 2030 h/Laser-On 9814 h - X travel distance 3000 mm (max. 3104) - Y travel distance 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel distance 114 mm - maximum material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - maximum positioning speed axle parallel 120 m/min - Simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y axis 15 m/sec. Standard - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet changer - Closed beam guide - NitroLine, high-pressure cutting - FocusLine, constant focus position - Comp ...
used
We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,270.0 mm Middle-center hole: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual
used
Waste Baler BTS-MF100 The BTS-MF100 Waste Baler is ideal for compacting loose cardboard, paper and film. By compacting these recyclable materials user receives a high volume reduction up to 90% and also waste disposal cost savings. The baler impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Solid bales with bale weight up to 100 kg - Suitable for baling of cardboard, film, clothes and many materials more - Powerful cylinder for optimal material compaction - Retaining Claws to reduce material spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 6 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2371 x 1388 x 1046 mm Transportation ...
Qty. 1 Second-hand baby diaper production line Mfc.: Maqmantas Type: Pannolini – 50 IMD Built: 2015 Size of diapers: Mini, Midi, Maxi, Junior Nominal Production: 50 pieces/min. Dimensions: 4800 x 950 x 2050 (L x W x H) mm (without exhauster) Room dimensions: 21 x 5.3 x 3.1 m – L x W x H Voltage: 3 ~ 220 V, 3 ph., 60Hz, 100 A Power: 12 kW Theoretical Weight: 1500 kg Screw compressor: 7, 5 bar The machine can be demonstrated in running conditions.
used
We offer you here a second choice half-timbered brace of the manufacturer SSI Schäfer for sale. Technical data for the truss strut: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x half-timbered strut, SECOND choice Material color: sendzimir galvanized Total length: approx. 1,304.4 mm Center-center hole: approx. 1,264.4 mm Profile dimensions: C 40 x 30 x 8 mm Diameter hole: approx. 11 mm Material thickness: approx. 1.25 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used
Ziehm Exposcop 7000 Compact Specifications: 23 cm BV, digital CCD memory LIH, video printer , with single monitor, resolution 1.2 lpmm. Sending images via the BNC video output. 6 months warranty. Monitor test according to DIN 6868 Part 57 until 2025. Very space-saving only 1.48 m2! With integrated second monitor. KV / mA range: 0.1 mA / 40 kV to 5 mA / 120 kV, Dimensions L: 180cm, H: 180cm, W: 100cm.
used
We offer you here a second choice deep jetty of the manufacturer SSI Schäfer for sale. The depth bar is suitable for a column depth of 1,250 mm and a maximum truss width of 55 mm. Technical data for the deep bridge: Profile abbreviation: U: 50 x 50 mm Truss pad: approx. 63 mm Material thickness: approx. 3.00 mm Included in delivery are: 01x deep bridge, SECOND choice Material color: blue Total length: approx. 1,264 mm f. Stand depth: approx. 1,250 mm Clear span: approx. 1,130 mm General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
used
Qty. 1 Second-hand aluminium vertical billet casting plant Mfc.: Wagstaff, Tongrun, Stas Built: 2012 Stopped: 2016 Billet dia.: Line 1: 101.5 – 228.6 mm (4” – 9”) Length: 6300 mm Dia. 101.5 mm – 112 Strands Dia. 127 mm – 76 Strands Dia. 152.4 mm – 112 Strands Dia. 177.8 mm – 72 Strands Dia. 203.2 mm – 62 Strands Dia. 228.6 mm – 50 Strands 1 Qty. 1 Second-hand vertical billet casting line – LINE 1 Molding tables for vertical casting of Aluminium billets of 112 billets with 101.5 mm, 127 mm or 152.4 mm in dia. Other table with 72 billets of 177.8 mm, 203.2 or 228.6 mm in diameter 2 Qty. 2 Melting Furnaces with 60 t capacity/each, and 8 t/h fusion rate, Natural Gas, Regenerative System, Manufaturing by Tongrun in 2011 – China. 3 Qty. 3 Homogenising Furnaces, with 35 t/each for billet, Natural Gas, Cycle 8 t/h average. 4 Qty. 1 Holding ...
used
Marel IPM3 X600 Portioner for fish and meat Released: 2003 Condition: Restored Designed for slicing meat, fish fillets and whole fish into portions of similar weight. Two working conveyor belts allow you to speed up the slicing process and increase the productivity of 8 to 10 workers. Equipped with a dispersal conveyor belt, a sorting device on 2 x 2 baskets. Dimensions: 3400 x 1620 x 1700 mm. Pipeline width: 280 mm. Pipeline speed: 0.5 meters per second The number of resins per minute is 5 to 8. Power: 7.1 kW Connectivity: 3 x 380 - 480 B Send a request
Qty. 1 Second-hand roughing, finishing mills and special equipment Mfc.: DAVY, TMEIC, TOSHIBA, MITSUBISHI Type: 4-Hi Rev. Built: 1997 Revamped & Installed: 2008, 2011 Stopped in 7-2017 Revamped cost of USD 151.0 Mill. from 2008 up to 2011 Finishing mill equipped with CVC Roll plus Technology System Finishing mill – new hydraulic adjustment to increase rolling force to 90 MN Roughing & Finishing mills: Technology Control System (Level 1) Process Models (Level 2) for pass schedule calculation, profile & flatness control (PFC), Pacing system & Material tracking Revamped by SMS in 2011: Roughing mill: Slipper-type Spindles Product capacity: 2,000,000 ton/year Mill capacity: 30 Plates/h Entry Material: Slab T130~300 mm x W1,200~2,200 mm x L2,350~4,000 mm Final Product: Plate T5~180 mm x W1,200~4,100 mm x L max. 25 m Application: Ship building plate & Pipe pro ...
used
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Otto Hänsel GmbH Type: HWR Contents: 330 l Net capacity 200kg Output: from 300 kg/h up to 800kg/h, in depend of product Enginepower: 3,8/3,1 kW Agitator speed: 90 / 45 n/min. steampressure: 10 atü steamconsumption: bis 120 kg/h Steam: Sattdampf, bis 10 bar dimensions: ca. 1500 x 1325 x 1950 mm weight: ca. 1280 kg different: Copper inner shell refurbished from the last owner, this mean checked, cleaned, defect parts changed, paints I offer this machine in checked/cleaned/painted” condition
Qty. 1 Second-hand wire cage welding machine – very good condition Mfc.: Züblin Type: ASMS 30 200 Built: 1985 Machine for production of wire cages within the range of diameters between 300-2250 mm. Wire cage dia.: 300 – 2250 mm Dia. of longitudinal wire: 5 – 7 mm Number of longitudinal wires: 12 Diameter of ring wire: 5 – 9 mm Grade of ring wires: 35 – 165 mm Longitudinal wire – speed:0.3-3.0 m/min.
new
Manufacturer: Medoc The machine is made of sturdy 18/10 stainless steel construction; Suitable for working in harsh conditions; Floor model; Automatic preset control to fix the work bar; The model has a fixed top, as an option it is offered – with a removable top; Model for right-handed operation; Equipped with a special plate for adjusting the thickness of the pieces and a piston; Easy cleaning with pressurized water. Belt width: 2500 mm.; diameter – 300 mm.; Security system where the tape stops at the 4th second. ON – OFF activation of a button in the event of an emergency Design with smooth surfaces, where the machine is easy and quick to clean. Certified machine meeting CE norms. Technical data: Wheel diameter: 300 mm. Motor power: 3 HP, 230 / 400V, three-phase Tape length: 2,500 mm. Machine dimensions: 325 / 745 /1670 m ...