sealing machine used for sale

Multivac T200 Tray sealer 2007, Stainless, twin tooling currently set to seal a 200mm x 130mm tray, mobile, 3Ph

Used machine for the application and sealing of shrink sleeve labels. Manufacturer PDC Europe SAS. New 2007. The machine consists of: 1. shrink sleeve label applicator PDC100BEM , 2.5 kW. The sleeve applicator is an automatic unit designed to apply neutral or printed PVC and/or PET sleeves. The process of making and setting the sleevs takes place in five working zones: The spool is supported and unwound up to the opening tetrahedron, The roll of sleev is opened and then directed to the cutting zone where it is cut to length. The sleeve is moved from the cutting zone to the ejector by means of a feeder. The product to be labelled is fed underneath the ejector, positioned underneath it precisely and moved on. The Sleeve is placed on the product using the ejector. Estimated weight of applicator: approx. 300 kg. 2. heating tunnel TAR1500-III for heat-shrinkable labels. Output 19 ...

Bag machine U 1100 for side seam products from RHS Elektrotechnik (Stiegler) Conversion of servo technology in 2013 by RHS Working width 300 mm – 1100 mm, Throughput max. 70 m/min., 20 – 200 cycles/min., 3 single hole beams/6 mm Feed 70 mm – 300 mm, single-lane unwinding

Bag machine TS 800 for side seam products from RHS Elektrotechnik (Stiegler) Conversion of servo technology 2017/2018 by RHS Working width 150 mm – 750 mm Throughput max. 50 m/min., 50 – 150 cycles/min. 2 single hole beams/6 mm Feed 70mm – 250 mm, single-lane unwinding

Semi-automatic machine 220 V Electric box with disconnecting switch Reset system for screwing head Bottles from 30 to 365mm height Bottle holder tray (manual height adjustment) Current tooling : 1 screwing head covered with rubber with 3 brackets. Head foot for ? 31. Possibility to change head for other format / use or crimping, capping, ...

Zalkin TM125 single-headed capping machine The maximum output of this equipment is about 3000 bottles / hour. The bottles are introduced by accumulation. Direction left -> right Current format: Plastic Cap: diameter 60.5 mm x 4.5 mm Aluminium Cap: diameter 62 mm x 4.5 mm 16-cell wheel: pitch diameter 530 mm / cell diameter 56 mm - Caps dispenser (vibrating bowl + dispensing chute taken on the fly) type ADV N?6430 and 6428. - Rotating table: feeding bottles Entry conveyor belt: 2000 mm / width 110 mm Belt at the entrance on the machine: 1500 m Exit belt: 500 mm Capping head 104 Voltage: 380 Volts 50 hz electrical box on the output side. 1 control cell for checking the presence of the bottle with plastic cap 1 control cell for checking the presence of the aluminium bottle cap. 1 accumulation detection cell 1 jam detection cell

Beck Series Packer S 1450 X with Gripper Feeder Longitudinal and transverse welding and working height adjustment variable Working width 140 mm to 500 mm Length, variable, endless Height up to 100 mm Flat film PE feed via one roll each for the bottom and for the top Edge strip rewinding device Packing capacity up to 60 packs per minute

Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A

Product number: 2849 Type: A10 Serial number: 01-1746 Year of construction: 2007 Compressed air: 8 Bar, 640 l/min. Water: 8 l/min. Power: 3 x 400V, 50Hz, 12kW Dimensions: 12500 x 1000 x 2150 mm Weight: 2700 kg

Angle welder for welding in different containers

Rommelag Bottlepack 3012 Blow-Fill-Seal Machine (BFS) with moulds for nasal & eye drop bottles 5 ml. & 10 ml., 7-cavities (7x5 ml. & 7x10ml.), capacity up to 3.000 bottles per hour, includes granulate vacuum feeding system, cooling wáter recirculation sytem and miscellaneous spare parts, new Siemens touch screen control panel (HMI) in 2015.

Groninger MFCS 201R filling & closing machine for cremes, etc. in pots comprising pot & screw cap infeed via two (2) rotary infeed tables – filling station with product hopper with stirrer – sealing foil station – heat sealing station – screw capping station, Siemens SIMATIC S7-300, dosing up to 270 ml., capacity up to 60 pots per minute, linked directly to Pago System 502 labelling machine for wraparound, top & bottom labelling with PAGOmat 6/2 label dispenser (excellent condition with less than 1000 running hours)

Filling line with 8-fold bottle filler, 3-fold screwdriver and lifting station The system ran until 2023 with mostly 1000 ml bottles and was no longer needed due to a new investment. Further information can be requested.

Lemo Intermat V. 600 ST-N-400 , Year 1999 Machine for the production of wicketer bags HD-PE, LD-PE, LLD-PE, PP Capacity max. 210 bags/minute. Unwinder Max. width = 1350 mm (with brake and side edge control) Max. diameter = 1200mm, Sleeve = 6" Longitudinal separating unit (can also be used for perforation) Folding triangle to form a half tube. Folding unit for bottom gusset 2 punching units bridge with tools 1 punching unit for valves 1 separating seam welding device Pen stacker Data: Bag length 155 -520 mm incl. flap flap = 40 -60 mm, Bottom gusset =27-60 mm Bag width = 70 to 400 mm Test run is possible. The machine is well maintained.

Optima ImmuFill filling & closing machine for plastic bottles used for Test Kits in diagnostics with screw cap and labelling, bottle diameter max. 55 mm, bottle height max. 130 mm, screw cap diameter max. 28 mm, filling station for microdosing via a peristaltic pump (filling accuracy +/-5% at 0,5 ml.), torque controlled screw capper, Wipotec weighing cell for checking the weight of the filled bottles, label applicator with Domino V230i thermotransfer printer, capacity up to 1,500 bottles per hour with a filling volume of 10 ml., machine floor space approx. 2820 x 2500 mm (LxW), machine height approx. 2200 mm

Groninger plastic bottle filling & closing line for eye drops (Ophthalmic), etc. comprising ZVB 2650 fully automatic empty bottle sorting & feeding unit and DSVG 4132 fully automatic intermittent motion filling, stopper and capping machine with barrier system with laminar flow modules type ORABS with LF Units, working stations: 1. IPC Tara – 2. gassing during filling – 3. 4 filling heads (multi stage filling) with servo controlled peristaltic pumps, filling accuracy +/-0,5 % referred to volumes above 1 ml. and +/-1,0 % referred to volumes below 1 ml. – 4. IPC gross – 5. post-gassing – 6. 2-head dropper inserting station – 7. 2-head screw capping station – 8. Bottle discharge, Allen Bradly Control Logix PLC + Allen Bradley Panel View Plus 6 / 1500 HMI, includes format parts for bottles for 3 ml. (Ø 18,70 x H 28,20 mm) and 10 ml. (Ø 25,00 x H 43,65 mm), capacity up to 120 b ...

Semi-automatic filling and capping machine for liquids Including. Format parts for 3 bottle formats 10ml / 30ml / 60ml amber glass bottles

Machine in great condition, fully operational. Production year of the welding machine and heating tunnel 2009. Dimensions of the sealer 240x120x145 Weight 1130kg

Groninger KVK-F5 fully automatic 6-head crimping machine including DTE 1000 infeed turntable (Ø900 mm), object diameter 14,00 – 68,00 mm, object height 34,00 – 145,00 mm, aluminium crimp cap diameter 13,00 – 32, 00 mm, power consumption 6,5 KVA, compressed air 6 bar, height of object transport 900 mm +/- 15mm, HMI 18,5 inch Omron-TFT-FullHD-16:9 Display / Multitouch Touchscreen / Industrial PC with Windows 10 lo T, integrated recipe management with space for 200 recipes, Audit Trail, Siemens SIMATIC S7, required floor space including infeed turntable approx. 4456 x 2432 mm (LxW), capacity up to 6,000 vials per hour, includes format parts for 2R ISO Vials (Ø16,00 x H35,00 mm) and Flipp-off-caps (Ø13,30 x H7,70 mm)

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

Fully rebuilt by Weiler in 2018. Characteristics: Output: 2800 containers per hour Molds and tooling for 100ml IV bags/bottles (12 cavity, 12 parison) included Eurocap cap welding machine with cap elevator Including: - new fill system - new extruder drive - new parison head - hydraulic system overhaul

Bausch + Stroebel - fully automatic line for washing, drying/sterilising, filling & closing of cartridges comprising: B+S KWM 10000 washing machine with ultra sonic cleaning, container diameter from 7 up to 15 mm, max. container height 90 mm, capacity up to 30,000 cartridges per hour B+S DHT 2550 hot air sterilizing tunnel, conveyor width 500 mm, total length approx. 2770 mm, width approx. 1700 mm, height approx. 1900 mm, output up to 73 kg per hour B+S KFM 8024 filling & closing machine, continuous motion, insertion of plunger stoppers – insertion of mixing balls – gas-flushing before dosing – dosing using ceramic rotary piston pumps (6-head pre-dosing station + 6-head post-dosing station) – closing the cartridges with rubber lined crimp caps – magazine out feed, dosing range 0.1 – 500 ml, container diameter from 7 up to 14 mm, max. container height 90 mm, CIP/SIP-System, ...

There are three identical machines available, including documentation.

Compressed air supply: 6bar, connected load: 14.7kW.

Operational hours counter: ca. 200h, with spare parts and documentation, inspection is possible, but not under power.

Number of lanes: 2, bag width: 12-50mm, bag length: 20-200mm, max. sealing force: 1000N, max. throughput: 2x 100 bags/min, weight: 1t, operating hours: approx. 3500h, with integrated belt checkweigher Wipotec-OCS HC-A-2000-2-2-track and counting and grouping system Merz KT-160.

System includes (1) Servo-Controlled Filling Machine Rationator Robomat L1M, number of filling stations: 8, controls: RATRONIC-CONTROL, weight: 1.1t, year of construction: 1999 (2) Capper Rationator Robocap 1/4, weight: 1.35, year of construction: 1997 (3) Labelling Machine Breitner TPE 6033, year of construction: 2004, has been regularly serviced, on-site inspection is possible.

There are two identical vertical bag filling machines available, weight: 1.1t.

Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130.

Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale.

Product dimensions: 650-1200x300x240mm, roll width: 800mm, roll diameter: 350mm, max. speed: 50 cycle/min, length: 5170mm, width: 1452mm, height: 1435mm, weight: 1.1t, one band is torn and needs replacing.

Max. speed: 90 bags/min.

Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.

Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.

Compressed air supply: 6bar, connected load: 7kW.

Working height: 820-900mm, max. film width: 550mm, output: 60 cycles/min, product width: 25-450mm, product height: 2-200mm, product length: 80mm to unlimited, connected load: 3kW, length: 2140mm, width: 1450mm, weight: 650kg, with documentation.

Max. Output: 300cycles/min, max. stacking speed: 30packs/min.

Working height (on stand): 930mm, tunnel entrance dimensions: 450mm/230mm, tunnel length: 700mm, sealing range: 500mm/400mm. Weight: 270kg, dimensions X/Y/Z: 2200mm/850mm/1500mm.

Speed: 18m/min, heating output: 1.35kW, length: 2750mm, width: 976mm, weight: 650kg, including documentation, spare parts and accessories.

Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.

Output: 8000 bottles/h, machine is fully functional.

Fully automatic thermosealing machine that ensures packaging in a protected environment in a two-step mode, including automatic intraduction of containers, thermosealing and individual cutting of the packaging. Prepared for use within a temperature range of 0°C to 20°C, with an air humidity of up to 90%. Maximum film width: 430mm For Ø180mm circular format External dimensions: 4670mm x 1220 x h2000mm Currently 2 molds of 2 loads each are available. COMPLETE DOCUMENTATION AVAILABLE

Used vertical multi-row machine for filling loose products (instant coffee, etc.) into stick sachets by Triapex model HNXB6. New 2007. Machine description: - 6-row machine (forms 6 sticks simultaneously). - machine equipped with tubes with a diameter of 25mm - forms sachets with a width of 40mm (possibility to order tubes with diameters from 10 to 50mm from the producer) - adjustment of sachet length from 30 to 180mm - output of 30 cycles per minute (for sachet length 150mm); 30 cycles x 6 = 180 sticks per minute - screw dispensers with servo motors - regulation of the amount of dispensed product by changing the speed of the screw - film reel parameters: maximum reel diameter 600mm (the reels used by us have a diameter of 450mm); inner diameter of the reel (thimble) is 76mm - power supply parameters: input power 4.5kVA, 3 x 400V, 50Hz; air pressure 0.5 - 0.8MPa, maximum air con ...

Description: Welding width approx. 1300 mm Vacuum snorkel height adjustment approx. 400 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 100 x 1,900 mm, weight approx.: 170 kg

Bausch + Stroebel KSF 2020 monoblock filler and screw capper, 2 filling heads with a dosing range from 0.1 to 100 ml. with the appropriate pumps, first closing station for droppers/bungs, etc., second closing station for screw caps, size range container diameter 16-55mm, height max. 135 mm, includes format parts for threaded vials GW2.5, GW5, GW10, GW15, GW25 & GW50, output up to 6,000 vials per hour, including infeed and outfeed tables

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film ...

Professional packaging system from a renowned German manufacturer. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. -Automatic welding frame movement by manual release. -Roller holder and product tray adjustable. -Height adjustment of the conveyor belt via hand crank. -Tunnel opening approx. 550 x 300 mm. -Hot air flows in the tunnel mechanically adjustable. -Maximum package dimensions approximately: 550 mm x 300 mm. -Maximum film roll width approx. 600 mm. -Perforation of the foil possible via 2 adjustable needle rings. -Machine with castors movable and lockable. -400 V / 7 KW. Setting options on the display: -Tunnel temperature. -Welding time. -Transport time of the conveyor belt. -Transport speed of the roller chain. Dimensions set-up approximately: length 2.5 x width 1.1 x he ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...