seal used for sale

Height=1.81 m, Overall length= 1.07 m, Overall width= 3.4 m, Net weight= 735 kg,

Machine is in good working condition. Parts shown by hand not come.

A tray sealer MetalTech is available. Materials: plastic trays/aluminium trays, max. tray dimensions X/Y: 325mm/265mm. An on-site inspection is possible.

Machine is in good working condition.

Machine is in good condition.

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 50 kg,

A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.

Height=2.23 m, Overall length= 3.38 m, Overall width= 1.6 m, Net weight= 360 kg,

Height=1.62 m, Overall length= 2.56 m, Overall width= 0.8 m, Net weight= 335 kg,

Height=1.05 m, Overall length= 0.95 m, Overall width= 1.24 m, Net weight= 385 kg,

Height=1.09 m, Overall length= 0.72 m, Overall width= 0.91 m, Net weight= 231 kg,

Tube filling and sealing machine with hot air unit for filling and sealing PE and laminate tubes, Output depending on tube size, filling volume and viscosity of the filling product approx. 15-20 cycles / min. incl. cooling unit

A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.

A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.

Promens 511SD Tray sealer 2015, stainless frame, tray dimensions 400mm x 300mm, mobile, 1Ph

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

Height=1.69 m, Overall length= 0.76 m, Overall width= 1.6 m, Net weight= 224 kg,

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Height=1.62 m, Overall length= 0.8 m, Overall width= 1.29 m, Net weight= 335 kg,

Height=1.07 m, Overall length= 1.43 m, Overall width= 1.04 m, Net weight= 598 kg,

Two induction sealing machines are available. 1) Shandong Better Onward Machinery LGYF-2200, foil material: aluminum, container material: nonmetallic bottles, sealing diameter range: 20mm-150mm, bottle height range: 20mm-600mm, sealing capacity: 120-300bottles/min, machine dimensions X/Y/Z: approx. 750mm/650mm/1600mm, weight: approx. 50kg. 2) Guangzhou Dingwei Machinery DW-4200, sealing diameter range: 15mm-130mm, bottle height range: 50mm-350mm, machine dimensions X/Y/Z: approx. 700mm/750mm/1400mm, weight: approx. 40kg. Documentation available. On-site inspection is possible. The images are samples.

SMIPack FP560A L sealer and shrink tunnel 2011, Semi auto L sealer, sealing bar 560mm x 430mm, max pack height 230mm, up to 1500 packs per hour, mobile, 1ph, then feeds onto SMIPack T450 shrink tunnel, adjustable temp and speed controls, mobile, 3Ph

SMIPack BP600 Monoblock semi auto shrink wrapper with sealing bar 2013, Monoblock semi auto shrink wrapper with sealing bar, sealing bar 550mm, max output 10 packs per min, max product height 380mm, 3Ph

A semi-automatic 1-head pneumatic jar closing machine Lenssen Vul-En Sluittechniek is available. Closing capacity: 720jars/h, operating pressure: 6bar, machine dimensions X/Y/Z: approx. 500mm/500mm/800mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.

Manufacturer: MEURER Type: CMK/M Angle welding machine + shrink tunnel Last used as a bundle packer for processed cheese (round cartons) El. Power: 8 kW Voltage: 380 V Condition: good, fully functional

Qty. 1 Second-hand side-seal bag manufacturing machine Brand & Model: GUR IS TY-1050 MT Built: 2020 Type: Side weld bag making machine PE film 20-100 micro Type of production: Side weld bags: Patch handle bags with handle cut off Safety bags Different type of side-weld bags Side weld & Bottom seal bags Bottom Gusset bags Open/Closed lip bags Round Bottom Bags Header Seal Bags Material that can be processed: LDPE, HDPE, and recycled extracts Sealing width (bag length): Up to 1050 mm Draw length (bag width): 80 to 600 mm Linear speed: Up to 300 m/min Bags per min.: Up to 200 Bags/min.

Horizontal intermittent motion bagger for forming, filling and sealing duplex sachets. Mini maxi sachets: Width: 45 to 65 mm Height: 50 to 130 mm Capacity: 1.5 to 15 cm3 Volpak screw feeder: Type: DS-303 Year: 1997 Dosage volume: 1.5 to 15 cm3 Formats sold with the machine: 8 screws size 0 + 9 dosage cones 2 screws size 00 + 3 dosage cones 2 screws size 2 + 2 dosage cones 3 models of filling wand., formats: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Cadence: 45 to 110 strokes per minute , Elec:: 380 V / 50 Hz / 9 A , Mini Maxi: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Type: DS-303

Inv. Num. : 8888 Type: WRC-8VC Producer: BERO Created: 2007 Parameters: Sealing seam width (bag width): 160-800 mm Extension length (bag length): 285-1820 mm Number of lines: 2 Maximum speed: 200 m/min Bags per minute: 200 1/min Type: Pouch Making Machine for Pouch on Roll Production type: Bottom-sealed garbage bags on roll with tear-off perforation Processable materials: LDPE/HDPE and recycled materials

Height=1.35 m, Overall length= 0.84 m, Overall width= 1.57 m, Net weight= 356 kg,

A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Used Sealing Edge Machine Poly-Bagging PP, Type: 500 BM - Automatic feeding and sealing of films - Packaging of various products, especially for shipping, storage or retail packaging - The machine is designed for durability and functionality in production environments Visits and test runs are possible by arrangement.

A complete bottle filling and capping line is available. Ring bowl diameter: 960mm, filling valve count: 24, capping stations (KK): 6, capping stations (SV): 6, capper diameter: 240mm, filler and capper pitch: 125mm, filling capacity (0.5l): 6000bottles/h, bottle volume: 330ml/500ml, operating hours: approx. 7200h. An on site inspection is possible.

Sealing device BS packaging type VA3 230 V year 2020, table model, purchased in 2020 for EUR 1,786.45 net

Monoblock KRONES VKS- 054-PET Year of construction -1991 Number of fillers - 54 pcs., Number of screw heads - 8 pcs. The machine is in a state of technical novelty after a major overhaul in 2026, It has one set of format parts per 1.5 liter PET bottle

Stock number: F679, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube sealer, Construction: For sealing of plastic tubes, Welding width: Max W 75 mm., Manufacturer: Arenco, Type: GAP, Other: Excl. traction station

Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement.

Stock number: F742, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Alu seal welder, Construction: 4 holes circular table model - Semi-automatic, Motor: 600 W heating coil - 220 Volt, Manufacturer: Trepko, Other: Ellipse tooling, L 115 x W 72 mm.

Stock number: F837, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube sealer, Construction: For sealing of plastic tubes, Welding width: Max W 75 mm., Manufacturer: Arenco, Type: GAP, Other: Excl. traction station

2 pieces robust moment bag clamps / bag clamps for bag and big bag filling for safe and fast attachment of a bag ( up to 50 kg ) to a bag nozzle / filling tube, diameter 290 mm, outlet 150 mm Universal Application: Feed, Food, Building Materials, Agriculture · Easy one-handed operation thanks to lever mechanism · Hammered paint grey Bag nozzle diameter 290 mm, outlet 150 mm

Rühle VR1 packaging machine, tray sealer, with 2 different sealing tools, for tray sizes 187x137mm and 325x265mm (1/2 GN), including 4 boxes with trays 187x137x83mm Year of manufacture 2016, very little used, approx. 60 operating hours, Dimensions WxDxH 65x72x172cm, connection 230V, very good used condition, fully functional

OPEM Arabella Vacuum Coffee Packaging Machine – 250 gr – with valve system For sale is an OPEM Arabella vacuum packaging machine, ideal for packaging 250 g of coffee (ground or bean coffee or similar products). The machine is technically in very good condition and fully functional. Technical key data: • Manufacturer: OPEM (Italy) • Model: Arabella • Year of construction: 2005 • Pack size: 250 g • Packaging type: Vacuum bags made of roll film • Integrated aroma valve system • Suitable for coffee with CO₂ degassing • Capacity: approx. 20–30 bags/minute (depending on product & format) • Robust industrial design Special features: Compact design Reliable vacuum technology Spare parts partly available Viewing and test run possible by arrangement.

Grunwald Fully automatic cup filling and sealing system - 3 Format sets (BJ 2019) - Ink-jet encoding - Conveyor belt extension - Dosing bar incl. aerator inserts (BJ 2020) Filling Temperature: Cold Filling Cup: A) Round plastic bucket with handle and collection basket, ø175 x H 131 mm B) Round plastic cup, approx. ø 104 x H 55 or 65 mm C) Round plastic bucket with handle and grass collector, ø 227 x H 194 mm Lid: A+C) Plastic slip-on lid (tamper-evident closure) B) Pre-punched plastic blanks + slip-on lid Connected load: approx. 12 kW, 3/400 V/N/PE, 50 Hz Air requirement: dry, filtered compressed air, 6 bar, approx. 300 l/min. Dimensions: approx. L 2,200 x W 2,200 x H 3,200 mm (without removal belt and control cabinet) Weight: approx. 3,500 kg Condition: well-maintained, in working order Availability: immediately

Our state-of-the-art Automatic Tube Filling Machine is a versatile all-rounder and has been developed to optimally support companies with the highest quality standards. Thanks to its high-quality workmanship and wide range of applications, it offers intuitive operation that optimizes your tube filling processes efficiently and reliably. The powerful drives and the user-friendly color touchscreen control system allow maximum flexibility for format and product changeovers and greatly simplify your tube filling. The machine has memory locations for quick and reproducible setting of all relevant machine parameters. If you would like to optimize your tube filling processes through a strong production output with high quality at the same time, we at Impuls Packaging are your ideal partner. Overview of the overall system Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 ...

A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible.

The tray sealer is the ideal solution for operations that want to package fresh foods quickly, cleanly, and reliably. The machine seals menu bowls and ready-meal trays precisely and guarantees tight, high-quality seal seams. Thanks to the two film rolls, the tray sealer works efficiently with minimal operator input., Whether delicate foods, meat, vegetables or complete dishes – the tray sealer delivers professional packaging results in a small footprint, making it perfect for caterers, restaurants, manufacturers and regional producers. Robustly built, easy to use., Dimensions / weight: L x W x H: approx. 340 x 430 x 660 mm, weight: approx. 28 kg, Max. cup height: 160 mm, cup diameter: 90 mm

Relco MICS 2 Induction cap sealing machine Serial: 3493 2018, The MICS-2 is a powerful self contained induction cap sealing machine designed to fit into most line arrangements without modification. Its in-built castors allow the machine to be moved easily from line to line. Stainless construction, seals 20mm - 110mm diameter caps. ask for further spec.

Closing machine, fully automatic, year 2018, ALWID Variant-SK/DST, The system consists of:, - a fully automatic sealing machine, type: ALWID-VARIANT-SK / DST,, with a rotating star and set up for a screwing head, for one can size and one screw cap size, with fully automatic, Cap sorting and cap feeding, with lining of the, Cap sorting / parts conveyor, - With anti-twist device, set up for a round can size, - as a solo machine with 1.0 mtr. Infeed conveyor belt and 1.0 mtr., Outfeed conveyor belt, with infinitely variable belt drive, with, Bottle conveyor made of belt system, with complete electric, Control, machine base in stainless steel design, control cabinet on the, outlet side, - with a 4-sided protective cover with panes made of MAKROLON with, Security doors in CE compliant design, with top cover made of, MACROLON, General Information:, Working direction: right - left, Working heig ...

Capsule applicator and shrinker, make Enos, type Capsulatrice 1T., year 2015, for closing PVC capsules, with protective covering according to CE regulations, made of AISI 304 stainless steel,, Capacity: up to 2,500 bottles with PVC capsules,, up to 1,700 bottles for capsules made of aluminium, tinfoil, polyamine, This machine can be used for bottles of the formats:, Hmin= 230mm; Hmax= 370mm;, diameter min= 60mm; max= 110mm., Suitable shrink capsules should be made of PVC with dimensions:, Hmin= 35mm; Hmax= 70mm;, diameter min= 20mm; max= 40mm., The dimensions of the capsules used so far were:, H= 40mm; Diameter 32.5mm, The machine was used for the following bottle diameters:, 42mm; 52mm; 65mm and for a square bottle with LxW 45x45 mm., All moldings for these formats are for sale. Operating instructions are available., power: up to 2,500 bottles / hour, Dimensions / weight: L x W x H: app ...

Packaging capacity: approx. 30pieces/min, side belt height: 50mm, max. carton dimensions X/Y: 515mm/505mm, min. carton dimensions X/Y/Z: 140mm/90mm/80mm, tape width: 50mm, weight: approx. 200kg. An on-site inspection is possible.