seal used for sale

Fully automatic system for filling, sealing and sealing crucibles

Tube filling and sealing machine for PE and laminate tubes, mechanical max. 60 tubes/min., built in 2000, D.35 and D.50 formats

Complete linear filler incl. screwdriver for several bottle formats including ROCHMAN tightening banderolier with shrink tunnel and take-off turntable

A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible.

Dalex Welding Press

A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.

Height=1.6 m, Overall length= 1 m, Overall width= 0.8 m, Net weight= 300 kg,

Single-station monoblock filling and capping machine, suitable for filling liquids into corresponding bottles followed by capping. System includes: Bottle unscrambler, peristaltic pump, device for pre- and post-gassing, reject station, control cabinet, 1 format set, spare parts, etc.

Height=0.42 m, Overall length= 0.52 m, Overall width= 0.44 m, Net weight= 51 kg,

Two semi-automatic angle welding machines Minipack with L-seal for shrink film are available. Packaging capacity: 900 packages/min, sealing bar dimensions X/Y: 840mm/600mm, max. film roll diameter: 300mm, max. film roll width: 800mm, working table height: 930mm, machine dimensions X/Y/Z: approx. 2100mm/1000mm/1250mm, weight: approx. 250kg. Documentation available. An on-site inspection is possible. Sale of individual units is possible.

Height=1.5 m, Overall length= 0.95 m, Overall width= 0.61 m, Net weight= 245 kg,

Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.

Height=1.6 m, Overall length= 0.4 m, Overall width= 0.99 m, Net weight= 451 kg,

A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.

Height=1.29 m, Overall length= 0.82 m, Overall width= 0.46 m, Net weight= 142 kg,

Height=1.35 m, Overall length= 1.05 m, Overall width= 1.6 m, Net weight= 630 kg,

Height=1.16 m, Overall length= 0.9 m, Overall width= 1.55 m, Net weight= 361 kg,

Height=1.1 m, Overall length= 1.2 m, Overall width= 1.5 m, Net weight= 515 kg,

Height=2.01 m, Overall length= 0.85 m, Overall width= 4.85 m, Net weight= 1260 kg,

Height=1.62 m, Overall length= 0.8 m, Overall width= 0.6 m, Net weight= 220 kg,

Height=1.1 m, Overall length= 0.6 m, Overall width= 0.68 m,

Height=0.395 m, Overall length= 0.53 m, Overall width= 0.49 m, Net weight= 50 kg,

Height=1 m, Overall length= 0.9 m, Overall width= 1.15 m, Net weight= 325 kg,

Height=1.35 m, Overall length= 1.05 m, Overall width= 1.6 m, Net weight= 435 kg,

Height=1.81 m, Overall length= 1.07 m, Overall width= 3.4 m, Net weight= 735 kg,

Machine is in good working condition. Parts shown by hand not come.

A tray sealer MetalTech is available. Materials: plastic trays/aluminium trays, max. tray dimensions X/Y: 325mm/265mm. An on-site inspection is possible.

Machine is in good working condition.

Machine is in good condition.

Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 50 kg,

Height=1.62 m, Overall length= 2.56 m, Overall width= 0.8 m, Net weight= 335 kg,

A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.

Height=1.05 m, Overall length= 0.95 m, Overall width= 1.24 m, Net weight= 385 kg,

Tube filling and sealing machine with hot air unit for filling and sealing PE and laminate tubes, Output depending on tube size, filling volume and viscosity of the filling product approx. 15-20 cycles / min. incl. cooling unit

A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.

A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

Height=1.62 m, Overall length= 0.8 m, Overall width= 1.29 m, Net weight= 335 kg,

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Two induction sealing machines are available. 1) Shandong Better Onward Machinery LGYF-2200, foil material: aluminum, container material: nonmetallic bottles, sealing diameter range: 20mm-150mm, bottle height range: 20mm-600mm, sealing capacity: 120-300bottles/min, machine dimensions X/Y/Z: approx. 750mm/650mm/1600mm, weight: approx. 50kg. 2) Guangzhou Dingwei Machinery DW-4200, sealing diameter range: 15mm-130mm, bottle height range: 50mm-350mm, machine dimensions X/Y/Z: approx. 700mm/750mm/1400mm, weight: approx. 40kg. Documentation available. On-site inspection is possible. The images are samples.

SMIPack FP560A L sealer and shrink tunnel 2011, Semi auto L sealer, sealing bar 560mm x 430mm, max pack height 230mm, up to 1500 packs per hour, mobile, 1ph, then feeds onto SMIPack T450 shrink tunnel, adjustable temp and speed controls, mobile, 3Ph

SMIPack BP600 Monoblock semi auto shrink wrapper with sealing bar 2013, Monoblock semi auto shrink wrapper with sealing bar, sealing bar 550mm, max output 10 packs per min, max product height 380mm, 3Ph

A semi-automatic 1-head pneumatic jar closing machine Lenssen Vul-En Sluittechniek is available. Closing capacity: 720jars/h, operating pressure: 6bar, machine dimensions X/Y/Z: approx. 500mm/500mm/800mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.

Horizontal intermittent-motion bagging machine, to form, fill and seal duplex sachets., Mini maxi sachets :, - Width: 45 to 65 mm, - Height: 50 to 130 mm, - Contents: from 1.5 to 15 cm3, Volpak screw feeder:, Type : DS-303, Year: 1997, Dosing volume: 1.5 to 15 cm3, Formats sold with the machine:, 8 screws size 0 + 9 dosage cones, 2 screws of size 00 + 3 dosing cones, 2 screws of size 2 + 2 cones dosage, 3 models of filling wand., Cadence: 45 to 110 strokes per minute , Elec:: 380 V / 50 Hz / 9 A , Mini Maxi: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , formats: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Type: DS-303

Qty. 1 Second-hand side-seal bag manufacturing machine Brand & Model: GUR IS TY-1050 MT Built: 2020 Type: Side weld bag making machine PE film 20-100 micro Type of production: Side weld bags: Patch handle bags with handle cut off Safety bags Different type of side-weld bags Side weld & Bottom seal bags Bottom Gusset bags Open/Closed lip bags Round Bottom Bags Header Seal Bags Material that can be processed: LDPE, HDPE, and recycled extracts Sealing width (bag length): Up to 1050 mm Draw length (bag width): 80 to 600 mm Linear speed: Up to 300 m/min Bags per min.: Up to 200 Bags/min.

Height=1.35 m, Overall length= 0.84 m, Overall width= 1.57 m, Net weight= 356 kg,

A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Used Sealing Edge Machine Poly-Bagging PP, Type: 500 BM - Automatic feeding and sealing of films - Packaging of various products, especially for shipping, storage or retail packaging - The machine is designed for durability and functionality in production environments Visits and test runs are possible by arrangement.

Monoblock KRONES VKS- 054-PET Year of construction -1991 Number of fillers - 54 pcs., Number of screw heads - 8 pcs. The machine is in a state of technical novelty after a major overhaul in 2026, It has one set of format parts per 1.5 liter PET bottle