We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,273 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer fo ...
used
Complete cup filling and sealing machine (year of manufacture 2019) with inkjet encoding, conveyor belt extension and dosing bar (incl. perlator inserts, year of manufacture 2020) used in the cheese industry. Filling temperature: Cold filling, round plastic bucket/plastic bucket/plastic bucket 2: Diameter 175mm x height 131mm/diameter 104mm x height 55mm or 65mm/diameter 227mm x height 194mm. Dimensions X/Y/Z and weight, without outfeed conveyor belt and shifting shank: 2200mm/2200mm/3200mm and approx. 3500kg.
used
Flexipak rotary pot sealer Serial: 1270 2013, stainless rotary pot sealer, twin station sealer, previously used to seal a 60mm diameter pot, also comes with plate for an 80mm square pot, adjustable temp controls, with foot pedal, 1Ph
used
HOT AIR SEALING SLITTER, to be positioned on top of rewinder in extrusion lines or on top of unwinder in bag makers., It creates a RIBBON SEAL. 4 mm.wide on the web as per photo, while slitting, Adjustable air-blow Adjustable temperature Adjustable speed Adjustable width of the slit parts (200+1.400 mm./ 300+1.300 mm./ 400+1.200 mm.,…) minimum slitting at 200 mm. Complete with control panel, The machineis offered RECONDITIONED and TESTED
used
Used form-fill-and-seal machine Make: FINNAH Year of construction: 2001 Capacity: nominal 15-45 cycles/min. a'12 cups (2x6) Filling volume: 100-500ml Control: Control cabinets with Siemens S5 and S7 Aseptic: no, sterile air tunnel for filling line Eyelid sterilization: UV lamps Products: Yoghurt, quark desserts Product shelf life: 30 - 40 days in the chiller cabinet Available format sets: 150 grams = 3456 kg/hour 180 grams = 4147 kg/hour 200 grams = 4608 kg/hour Film material: Container film: PS, width 578 mm, thickness 0.8 mm. Lid film: Laminate, width 566 mm, thickness 0.08 mm, 45g/sqm for Mixpap polyester/paper composite (laminate), Control mark disdance: 185.95 +/- 00.8 mm Banderole: Paper, width 390 mm, thickness (weight) 97.5 g/m2 Height of the indivi ...
new
Horizontal pillow-pack packaging machine For the packaging of various products from A for Apple to Z like plums, the performance is dependent on the product and the cover material (foil) that are used to. Is the machine for packs of 20 to 50 wraps the minute set there are various special applications possible or additionally possible. Depending on customer request, the machine in a line can be built or supplied as a whole line. From the Eintaktung.Bis to the Pack in the box or E 2 box with Etieketierung and foreign body detection.
used
AC Automation LC800 semi-automatic L-sealer and shrink tunnel, belt width approx. 350mm, tunnel entrance approx. 350 x 180mm, sealing bar approx 500 x 400mm (L x W). Floorspace 2600 x 1000mm x 1400mm H
used
new
Semi-automatic continuous welding machine for foils and prefabricated bags
used
Case Dimensions(mm) Minimum Length 185 Width 140 Height 110 Maximum Length inf Width 460 Height 520 Three phase:415v,50hz 80psi (5.5bar) https://endoline-automation/714-semi-automatic-random-case-sealer/
new
Natural casing device without clips without knots Natural casing sealing system out clips
used
Foil packaging Minipack Sealmatic56E - Foil sealing machine -Machine - Manufacturer: Minipack Torre S.p.A. - Model: Sealmatic56E - Built in 2001
used
• Automatic/semi-automatic operation • Running direction from right to left • Packaging dimensions max. (w x l x h) 380 x 600 x 160 mm • Film width max. 550 mm • Film roll diam. max. 300 mm, core Ø 77 mm • Film thickness 15-50 ym • Sealing temperature 0-230°C • Rewinding of residual film • Shrink tunnel • Powered outfeed belt with sluice • Mobile on rollers • Foot switch • 7 pcs. unused film roll • Switch control • Drive 380V/50/60Hz
used
General SKU371T1118 LocationBarneveld MakeEdwards TypeA38513935 Mach.No.297 Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume400000 Ltr. Motor3.7 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:2 Capacity400m³/h With motor2,2kW, 220-240/380-415 With motor1,5kW, 220-240/380-415 Inlet100 mm Outlet25 mm Information Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Floorspace009x0,55 m Total height1,15 m Weight350 kg Extra Specificationsmachine is a 2-stage vacuum pump. Consisting of: Edwards Mechanical booster model EH 500A Edwards High Vacuum Pump model E2M 80 Vacuum pumpsEdwardsPumps > Vacuum pumpsBrand > Edwards What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping ...
used
General SKU227T452 LocationBarneveld MakeSpimabo Type2500 L No.263 Year of construction2003 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height1,6 m Weight400 kg CEcheck Floor space3,3x1,3 m Extra Specificationswith: Saxon :bag sealer: Ridder RT 115 transportbelt : from 2002, dimensions: 460x2400 mm, speed: 0,16 m/s:Miscellaneous transportSpimaboConveying systems > Miscellaneous transportBrand > Spimabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU227T451 LocationBarneveld MakeSpimabo Machinebouw (NL) TypeSP2500 No.324 Year of construction2007 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height2,3 m Weight480 kg CEcheck Floor space3,1x1,2 m Extra Specificationswith: O/K International bag sealer :SS2 R-L NB from 2007: Ridder RT 115 transportbelt : from 2004, dimensions: 460x2400 mm, speed: 0,16 m/s: Fischbein bag closer :Miscellaneous transportSpimaboConveying systems > Miscellaneous transportBrand > Spimabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU227T450 LocationBarneveld MakeSpimabo Machinebouw (NL) TypeSP2500 No.286 Year of construction2004 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Total height2,1 m Weight500 kg CEcheck Floor space2,7x1,3 m Extra Specificationswith: O/K International bag sealer :SS2 MK 2B from 2004: Ridder RT 115 transportbelt : from 2004, dimensions: 460x2400 mm, speed: 0,16 m/s: Fischbein bag closer :Miscellaneous transportSpimaboConveying systems > Miscellaneous transportBrand > Spimabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU236T271 LocationBarneveld MakeCyklop (DE) TypeCT-50/50 No.062/C91 Year of construction1991 Main Features MaterialMild steel Motor0.185 KW Specified Features - Miscellaneous MaterialMild steel Motor0,185 kW 220/380 - 240/415 Volt. Information Total height1,55 m Weight200 kg Floor space0,6x1 m Extra Specifications dimensions of the belt feeder 300x900 mm inlet width: 120 mm - 400 mm inlet height: 120mm - 520 mm width of adhesive roll: 50mmMiscellaneousCyklopMiscellaneous > MiscellaneousBrand > Cyklop What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Make : MULTIVAC Model : TS 250 Y.o.m : 2009 Condition : Good
used
Automatic Carton Case Sealer SIAT SM11–S Carton Case Sealer SM11 model is an automatic Fixed Format” case sealer where all adjustments needed to use the machine in a correct way are done manually and for this reason it is used for long runs with same box dimensions. The machine applies automatically two self-adhesive tape stripes on the upper and lower boxes middle line. The SM11 adjustment and use are intuitive, simple and fast. Technical Characteristics Manufacturer SIAT Packing Systems Manufacturer’s type SM11 - S Belt conveyor type SIAT CT-2 12/500 Year of manufacturing 2006 (CT2 year 1999) Output up to 840 boxes/hour Box dimensions Min-Max 200-600 x 150-500 x 100-600 mm (L x W x H) Taping units 2 x K11R for 50 mm wide tape Electricity 500W / 380V / 240V / 50 Hz Certificate CE compliance
used
Sealing bar : 870 x 620 mm Maximum pack height : 310 mm Average output up to 300 pph () Packs per hour. The stated speed can change according to the product size, the pack collation and the type of film used. Maximum size of film reel : 800 - ø 300 mm Machine size : 1895 x 1055 mm - h 1190 mm Machine net weight : 167 Kg Usable Films: Pvc, Polyolefins : up to 30 µ
used
TRIBLOK ALSIM (Sidel) from the production of mineral water from Western Europe, still in production, dismantling by a professional company Mark ALSIM Sidel Type Washer/Filler/Sealer Year of production 1997 Dimensions Length L 7564 mm Width W 8700 mm Height H 3446 mm Description Alsim Rinser Asmojet (1997) and 1x Alsim Filler RV.P (1997), capping machine; lots of spare parts Power supply 380V 50Hz three phase Voltage 24V Power 32.5kW Syrup feed - pressure 1 - 1.5 bar Water supply-pressure 1 - 1.5 bar CO2 power supply 10 - 12 bar Compressed air 6 bar Air consumption 500Nl/min Compressed air connection ½ gas CO2 power supply DN25 Water supply DN65 Product output DN100 Product power DN50
used
HIGH SPEED MULTIFORMAT POUCH MACHINE MATERIAL WIDTH :1200MM (MAX) MATERIAL DIA : 1000 MM (MAX) POUCH WIDTH : 50-650 MM POUCH LENGTH : 30-300 MM - (250 MM X 6 =1500 MM) MACHINE SPEED :180CPM /45 meters POWER : 220V, 3 PHASE, 50/60 HZ COLOR: : STAINLESS STEEL/White COMPLETE WITH: - SHAFTED UNWIND ST AND X 1 SET - UNWIND DIA. 800 MM WITH ROLL - 3" AIR SHAFT - 2.5 KW POWDER BRAKE WITH ROTARY ENCODER AND DANCER FOR TENSION CONTROL - .55KW DRIVE MOTOR NIP WITH INVERTER CONTROL FOR UNWIND UNIT FOR CONTINUOUS MOTI ON UNWINDING - LPC SENSOR FOR UNWIND MATERIAL FOR EDGE/LINE GUIDING - PHOTO SENSOR (NT-6) FOR PUNCHING AND ELECTRONIC TOUCHSCREEN CONTROL FOR POSITIONING X 1 SET - DANCER ROLLER DEVICE X 1 SETS - UNWIND STAND CAN BE MOVED LEFT/ RIGHT BY MANUAL - ADJUSTMENT FOR QUICK SETUPS Material folding device for gussets x 1 set. Material ...
used
Used Bottle Labeler P E Labellers 12T 5S 10000 bph year 2018 New labeling machine overhauled in 2018 12 heads and 5 stations 4 of which are adhesive and 1 with glue for the L or U tax seal Fixed seal magazine machine pitch 220 minimum label 10 max 150 block bottles in input 3 automatic speeds with Danfoss PLC 10 000 bph with L seal 9 000 with U seal 12 000 bph without seal [...for more information send your inquiry to the seller.] refno: ET92
used
I would like to sell this machine, because we have a different profile and we will never use it. The process factory was closed right after the pre owner bought this machine and it had been closed until I bought this factory last year. Only the trying period was run trough. If you see the pictures you can see a roll of wrapping foil on the machine. It is the trying foil. There are two support stands behind the thermoformer full of with packaging forms. Before you buy it I will make a full service on this machine with GEA company and i will give you the certification from it. Guarantee! The price is including 6 different moulding form (the original price is about 15.000 €/piece) If you have any questions please ask me Technical description: - forming with preheater - forming via compressed air and vacuum - flexible and rigid bottom and flexible top film - max. forming dep ...
used
FOR SALE SULZER ASV 25/30 ENGINE NEW GENUINE SPARE PARTS AT TURKEY HAVE A GOOD DAY SIR. WE HAVE MANY NEW GENUINE SPARE PARTS OF SULZER ASV 25/30 ENGINE AT OUR STOCK. WE VE 200 ITEMS AT OUR STOCK. PLS FIND 100 ITEMS WITH PARTS NUMBER ON BELOW. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US.. NO. ONE - SULZER 12 ASV 25/30 PART NO. 1 NEW CYLINDER LINER 5001001 1 PCS 2 NEW PISTON 3404001 4 PCS 3 NEW CAM SHAFT SECTION 10107001 3 PCS 4 NEW COMPLETE LUBRICATION PUMP 30004 K 1 PCS 5 RECON CONNECTING ROD 1 PC 6 NEW LOWER CRANK BEARING D = 225 MM 02103 B 7 PAIRS 7 NEW UPER CRANK BEARING D = 225 M 02103A 7 PAIRS 8 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 9 NEW THRUST BEARING HELPED 2103001 2 PAIRS 10 NEW BOLT WITH OVERSIZE 701007/0VERSIZE 12 PCS 11 NEW BEARING SHELL HELPED D = 195MM 03004A 12 PAIRS 12 NEW BEARING SHELL HELPED D = 194.5MM 03004B 511200- ...
used
SUB: FOR SALE... NEW & RECON ORIGINAL PARTS L 48/60 AT STOCK HAVE A GDY SIR; WE'VE MANY NEW OR RECON SPARE PARTS OF MAN L 48/60 AT OUR STOCK. PLS FIND DTLS AT BELOW. MOST OF THEM SUPLIED FROM YOU IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. 1 NEW CYLINDER LINER X 1105003-7519 1 YOU 2 RECON EXHAUST VALVE 1140441 D 449216 1 3 RECON EXHAUST VALVE 11408100120560 1 5 RECON EXHAUST VALVE 114071002050560 1 6 RECON EXHAUST VALVE 1140441144 1 7 RECON EXHAUST VALVE 114071000960560 1 8 RECON EXHAUST VALVE 114061002560560 1 9 RECON EXHAUST VALVE 114091003053060 1 10 RECON EXHAUST VALVE 114071009960560 1 11 RECON EXHAUST VALVE 114091000500560 1 12 RECON EXHAUST VALVE 114071000950560 1 13 RECON EXHAUST VALVE 11406102640560 1 14 RECON EXHAUST VALVE 11408100120560 1 15 RECON EXHAUST VALVE 61953016796 1 16 RECON EXHAUST VALVE 6051953004859 1 17 RECON INLET VALVE 01 ...
used
Entry level or backup machine for production of thermoshrinkable bags out of shrink tubing. Web width 500 mm. Seal types: straight bottom seal, side seal, round bottom seal. Machine is dismantled and moved to storage to make room.
new
Pyrolyx Pyrolysator Thermal Double Screw Reactor Model 1-FD07 Reactor for the depolymerization and pyrolysis of rubber granules Capacity rubber granules (typical): 1100 kg/h media Compressed air: max. 7 bar Instrument air: max. 7 bar CO2 low pressure: max. 1.3 bar CO2 medium pressure: max. 3.5 bar specifications Dimensions of the system: 14600 x 1540 x 1500 mm Screw diameter: 790 mm Weight: about 20 tons. (metric) Product Contact parts: 1.0473 Pressure tested at 200 mbar Design -100/+200 In operation -80 Temperature maximum: Up to 550°C Operating temperature: 350°C-550°C Power requirement Start-up: 180 kW Energy demand Operation: 140 kW Seal: Gland seal(r) with graphite seal Max sound pressure level: 80 dBA Bearing flushing: with CO2 at 300 mbar engine: Voltage: 400V, AC Frequency: 50 Hz Power: 2.2 kW Protection class: IP54 Frequency transmiss ...
used
Labelling machine P.E. 16T.5S.6E-SL – glue and adhesive Year: 2005 Clockwise direction Speed: 12.000 BPH Electric adjustment height N° 2 adhesive station for: front and back N° 3 cold glue station for: front and back and U” Seal Seal with hot melt application Clamps to iron I” and U” seal Safety Protections with pneumatic lift Many bottles equipment and labels
used
Vacuum lifting device for paper rolls NAGRON AEROLIFT Vacuum lifter for the paper industry Woudenberg Holland Type R96-20 Fabr. No. 9745 Year of construction 1999 Payload 2000 kg Centering mandrel 90 mm Suction surface Outer diameter 850 mm (plus seal)Suction surface inner diameter 250 mm (minus seal) Seal width 50 mm Suction surface 0.5 m2 Negative pressure min. -800 mbar Pumping speed approx. 100 m³/h per vacuum pump Motor power 2x 2.2 kW Mains connection 400 Volt, 50 Hz - 2 pieces Rietschle vacuum compressor, type VCE 100 Dimensions x H 1600 x 2250 mm Height with centering mandrel 2500 mm Total height in transport frame 2950 mm Net weight 2,5 ton.; used
new
Compact vertical packaging system for small 3-side sealed pouches. The system is designed for 3 different dosing units and thus allows the packaging of granulates, powders and liquids. When changing the product type, time is needed for changeover, which requires technical experience. The configurations of the dosing units are selected on the basis of customized product requirements, which results in the respective specifications. OMRON PLC and 7-touchscreen, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, AIRTAC pneumatic components | self-diagnose functions, motorized tension control, fast and smooth film transportation. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | bag size: L(30-180)xW(10-80)mm | bag type: 3-side-seal-bags | vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting | film width: max. 180mm | ...
new
New Version complete small vertical packaging system including dosing unit for powder (auger filler). OMRON PLC and 7-touchscreen, stainless steel version (SS304 - optional SS316). Self diagnose functions, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, motorized tension control, fast and smooth film transportation, AIRTAC pneumatic components. 3-side-seal-bags, vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting. Film pulling: servo motor, horizontal sealing unit: pneumatic. Suitable for laminated BOPP/PE film, hotprint coder included (2 lines, 10 characters each). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | film width:
new
New Version complete small vertical packaging system including dosing unit for granulates (swing filler for smaller product particles and volumes OR cup granulate filler for larger particles and larger volumes). OMRON PLC and 7-touchscreen, stainless steel version (SS304 - optional SS316). Self diagnose functions, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, motorized tension control, fast and smooth film transportation, AIRTAC pneumatic components. 3-side-seal-bags, vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting. Film pulling: servo motor, horizontal sealing unit: pneumatic. Suitable for laminated BOPP/PE film, hotprint coder included (2 lines, 10 characters each). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | film width:
new
New Version complete small vertical packaging system including dosing unit for liquids (piston pump for slow flowing liquids OR gravity flow valve for normal flowing liquids). OMRON PLC and 7-touchscreen, stainless steel version (SS304 - optional SS316). Self diagnose functions, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, motorized tension control, fast and smooth film transportation, AIRTAC pneumatic components. 3-side-seal-bags, vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting. Film pulling: servo motor, horizontal sealing unit: pneumatic. Suitable for laminated BOPP/PE film, hotprint coder included (2 lines, 10 characters each). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | film width:
new
New Version complete small vertical packaging system including dosing unit for powder (auger filler). OMRON PLC and 7-touchscreen, stainless steel version (SS304 - optional SS316). Self-diagnosis functions, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, motorized tension control, fast and smooth film transportation, AIRTAC pneumatic components. Back seal type bags (pillow-/stick-packs), vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting. Film pulling: servo motor, horizontal sealing unit: pneumatic. Suitable for laminated BOPP/PE film, hotprint coder included (2 lines, 10 characters each). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | film width:
new
New Version complete small vertical packaging system including dosing unit for granulates (swing filler for smaller product particles and filling volumes OR cup granulate filler for larger particles or larger filling volumes). OMRON PLC and 7-touchscreen, stainless steel version (SS304 - optional SS316). Self-diagnosis functions, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, motorized tension control, fast and smooth film transportation, AIRTAC pneumatic components. Back seal type bags (pillow-/stick-packs), vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting. Film pulling: servo motor, horizontal sealing unit: pneumatic. Suitable for laminated BOPP/PE film, hotprint coder included (2 lines, 10 characters each). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | film width:
new
New Version complete small vertical packaging system including dosing unit for liquids (piston pump for slow flowing liquids OR gravity flow valve for normal flowing liquids). OMRON PLC and 7-touchscreen, stainless steel version (SS304 - optional SS316). Self-diagnosis functions, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, motorized tension control, fast and smooth film transportation, AIRTAC pneumatic components. Back seal type bags (pillow-/stick-packs), vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting. Film pulling: servo motor, horizontal sealing unit: pneumatic. Suitable for laminated BOPP/PE film, hotprint coder included (2 lines, 10 characters each). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | film width:
new
MAK 43 / FUEL PIPE SEAL KIT (193376845) /16 PCS MAK 43 / FUEL PUMP SEAT KIT (193466836) / 8 PCS MAK 43 / COOLING COLLAR (193376850) / 7 PCS MAK 43 / CAMSHAFT BEARING) / 1 PC MAK 43 / FUEL PIPE SEAL KIT (190376308)) / 19 PCS MAK 43 / FUEL PUMP SEAL LIT (193376848) / 28 PCS
used
Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 1514-2 -Type: DN65 PN40 1.4404/PTFE -Number: 4x seal available -Price per piece -Dimension: Ø127 x 4 mm -Weight: 0.1 kg/pc.
used
Modular labeling machine 10 heads Modular labeling machine Cold glue 4 stations Front back seal L neck ring self adhesive 3 stations Front back neck ring Bottles round square Label stations nr N 3 self adhesive stations N 3 Cold glue stations Central diameter 960 Plates nr 10 Length of the labels min max 10 150 Height of the label min max 15 200 Container diameter height min max 30 80 mm Altezza min max 100 400 mm Plate transmission Motorized plate Optical centering Yes Special inlet stars No 3 multi format in out stars D 50 120 mm Industria 4 0 yes predisposed other request Double screw input in phase Max speed request 6 500 bph Modular labeling machine basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production ...
used
Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates motors boards and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type complete overhaul of the glue group for the l shaped seal for the PE labelers review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of auger entry exit star counter star 11 one seal format per glue group for adhesive rotary labeling up to 6000 complete w ...
used
Modular labeling machine 14 heads cold glue adhesive 8000 14 000 BPH This New modular labeling machine can be customized as needed Suitable for applying labels COLD GLUE AND ADHESIVES GLUE collar GLUE back U or L seal ADHESIVE front ADHESIVE back Bottles Containers CYLINDRICAL and SHAPED No labeling stations No 3 COLD GLUE groups N 2 adhesive groups 60 meters ON THE MODULAR TRAY Head diameter 960 mm Plates number 14 Min max label length 10 150 Min max label height 15 200 Container diameter height min max 30 80 mm Height 100 400 mm Max required speed 8 000 bph Basic machine composition 1 System built according to CE regulations 2 Machine operation via PLC Schneider 3 Touch screen control panel for labeler functions installed on a mobile and rotating support 4 Automatic variation of production speed with inverters and detection sensors installed on the conveyor belts 5 Light column indicat ...
used
Horizontal flow-wrapping machine Pearl Servo D6133 for packaging chocolates and chocolate bars Dataflex 6230; 32 mm (LH) incl. - TTO Ultra black - Print head cleaning kit - Rotary encoder kit - Counter pressure roller 750mm long - Shaft for counter pressure roller - Universal frame - Language Kit - Clarisoft Ergonomic design: HMI and start/stop buttons have been ergonomically situated to facilitate accessibility. High speed and versatility: Up-to 160 cycles/min. with 2UP and capable of wrapping endless diffrent products in the food and non-food sectors. No mechanical drives: Drive motors are connected directly to the various assemblies. The electrical panel is housed inside the machine frame and protected from the external environment. Compact design, easy cleaning: Thanks to the cantilevered construction and the use of polymer moulded components with graceful radiuses ...
used
Cylinder head F/BFL912/913 Net= 165,- Cylinder head FL812W Net= 345,- Cylinder head FL812D Net= 345,- Cylinder head FL712 Net= 345,- Cylinder head FL612 Net= 395,- (all cylinder heads kpl.with valves ready for replacement available) Piston+female 712/812 Net= 245,- Piston+female 912 Net= 100,- Head screws 912/913 Net= 15,- Head screws BFL913 Net= 15,- Head screws FL712/812 Net= 36,- Head seal kit F/BFL912/913 Net= 9,- Head seal kit FL712-812 Net= 25,- Nozzle insert FL912-913 Net= 30,- Nozzle insert BFL913 Net= 30,- Nozzle insert BFL913- P-nozzle Netto= 45,- all prices subject to change,price changes reserved per piece plus geseinfo@miw-zeven.dtzl.Tax email=
used
: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width ...
used
The basic unit includes following modules (standard equipment): ï? Compact and stable design in modular design ï? All feeding systems that ensure an optimal product handling, are adaptable ï? Control Panel with 4-zeiliger plain text display for the following: piece counter. Speedometer, hour meter, temperature monitoring, General Fault indicator ï? Wear-free, infinitely adjustable, patented tension system ï? Wear arm seal system by steel seal bars with more accurate Temperature monitoring ï? Mechanical locking of the clamping bar, this precise slide clamp and sealing ï? Product protection by security monitoring via light barriers in the Clamping range ï? Switching and Pneumatics Cabinet integrated into the machine ï? maintenance-free and oil-free operation Technical data: ï? Control right ï? Control Panel of Lauer PCS (standard) ...
used
New (secondhand) Compact, reliable, horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. Pump materials in contact with the liquid are in high-grade stainless steel. The mechanical shaft seal is a special designed, unbalanced O-ring seal. CM 5-4 (photo 1 and 2) Rated flow: 4.7 m³/h Rated head: 30.7 m CM 3-4 (photo 3 and 4) Rated flow: 3.1 m³/h Rated head: 27.4 m
used
New (secondhand) pumps Delivery: up to 31 m3/h. Head: up to 62 m. Power supply: three-phase 50 and 60 Hz. Power: 0.37 kW to 3 kW. Maximum operating pressure: 8 bar. Temperature of pumped liquid: -10°C to +85°C (CEA-CA) / -10°C to +110°C (CEA-V CA-V with elastomers in FPM). Insulation class: F. Protection: IP55. Pump body: Stainless steel. Impeller: Stainless steel. Diffuser: Stainless steel. Seal housing: Stainless steel. Adapter: Aluminium. Mechanical seal: Ceramic/Carbon/NBR. Fill and drain plugs: Stainless steel.
used
The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...