132,101 used machines on RESALE, but how to find them? Machine Search
\" System 3R EDM Tooling Set – Art. 3R-901-20E / 3R-90°-01 – Made in Sweden System 3R Clamping and Tool Holder Set for EDM Machines. The set is in mint condition and comes from stock. Scope of delivery (4 packs): • System 3R base plates / tension strips • Angle plate / clamping bracket • 3R clamping brackets / mounting elements • Set of 3R collets (in the magazine) • Screwdriver / assembly tool • Accessories and fasteners 1. System 3R base plate / tension strip Manufacturer: System 3R Type / Item no.: 3R-901-20E Condition: as good as new (stock) Description: System 3R clamping strip / base plate for the System-3R EDM clamping system. Precision component for holding and positioning electrode holders or workpiece holders on EDM machines. Origin: Made in Sweden Scope of delivery: Base plate according to the picture. 2. System 3R Angle Plate 90° Manufacturer: System 3R ...
\" U-screw gauge set / outer micrometer UltraPrecision Messzeuge GmbH – 75–150 mm – 0.01 mm (incomplete, 3 pieces) – in a wooden box Outer micrometer/U-micrometer set in the original wooden box from UltraPrecision Messzeuge GmbH.The set is not complete: There are only 3 micrometers available (measuring ranges 75–100 / 100–125 / 125–150 mm). Accessories/adjustment dimensions are partly available. • Manufacturer: UltraPrecision Messzeuge GmbH • Device type: U-screw gauge / outer micrometer (set, incomplete) • Number of micrometers: 3 pieces • Measuring ranges: • 75–100 mm • 100–125 mm • 125–150 mm • Reading / resolution: 0.01 mm • Storage: wooden box • Scope of delivery: 3 micrometers + available accessories in the box \" Auction-ID: A7-46417-349
\" Test pin set 4.00–5.00 mm in 0.01 mm gradation KS Schmalkalden Cylindrical measuring pins Accuracy ±0.001 mm Graduation 0.01 mm Precision test pin set for checking bore diameters in the range of 4.00 mm to 5.00 mm.Gradation 0.01 mm.Accuracy ±1 μm.GDR /East production by KS Schmalkalden. Delivered in a wooden box. Used condition. Pins complete Measuring range: 4.00 – 5.00 mm Graduation: 0.01 mm Number of pins: 101 pieces Accuracy: ±0.001 mm Manufacturer: KS Schmalkalden Storage: wooden box \" Auction-ID: A7-46417-288
\" Jenoptik Hommel-Etamic W10 Roughness Meter Set with LV17 Feed Unit Portable Roughness Meter Hommel-Etamic W10 Set from Jenoptik IM Germany GmbH.The device is designed for mobile tactile roughness measurement and has an integrated printer for direct report output. The measured values (e.g. Ra, Rz, Rmax) are clearly displayed on the colour display. Scope of delivery according to pictures and type plates: • Hommel-Etamic W10 evaluation unit item no. 10065263 S/N 135539 year of construction 2016 • Feed unit LV17 item no. 10057645V02 S/N 136720 • Original transport case • Power supply • Connection cable • Operating instructions • Accessories according to case insert • Several thermal paper rolls for integrated printer Condition: used, visually with slight signs of wear. Equipment was in use. Sale is made as shown. Manufacturer: Jenoptik IM Germany GmbH Device type: Homm ...
\" Gauge Block / Parallel Gauge Blocks - 87 pieces - Grade 2 - in wooden case - complete Complete Gage Blocks with 87 individual gauge blocks, neatly sorted in original wooden storage box. Condition • Gauge blocks with slight surface and handling traces typical of use, no chipping or recognizable damage to measuring surfaces • Wooden box with scratches due to age and use • All gauge sizes sorted appropriately and complete • Type: Parallel gauge blocks / gauge block set • Number of gauge blocks: 87 pieces • Accuracy class: Grade 2 • Reference temperature: 20 °C • Measuring range: • 1.001 – 1.009 mm • 1.01 – 1.49 mm • 1.5 – 9.5 mm • 10 – 100 mm • Material: Steel (classic version) • Serial/set number: LS 7121 • Condition: used, technically good, complete • Storage: sturdy wooden case with lock\" Auction-ID: A7-46417-155
Dimension: 1050 x 500 x 1200 mm; 230 V; Auction-ID: A7-45992-128
\" Mixed lot of used clamping jaws / jaw segments made of steel, different designs and contours. The batch consists of various clamping or jaw segments, some with toothing, some with step or shape contours. Quantity: 32 pieces Net weight: 22 kg \" Auction-ID: A7-46417-195
2 needles and 4 threads; for heavy materials with superior transport; dimension: 1050 x 720 x 1100 mm; 220 V; requires compressed air; Auction-ID: A7-45992-147
Unused; Servo motor Direct Drive 220 V; 2 needles 4 threads; Auction-ID: A7-45992-142
Unused; Servo motor Direct Drive; 220 V; dimension: 1200 x 600 x 1100 mm; Auction-ID: A7-45992-141
Sturdy industrial tool cabinet made of sheet steel, suitable for workshop and manufacturing environments. Version with hinged doors, several pull-out shelves and 2 drawers in the upper area. Robust construction for heavy tools and accessories. Scope of delivery – Tool cabinet as shown – Several pull-out shelves – 2 drawers – Doors with lock – Without contents – Series: 3000 – Max. drawer load: 400 N – Max. shelf load: 600 N – Max. total load: 4400 N – Total external dimensions: 1000 x 500 x 1000 mm Auction-ID: A7-46417-72
\" Gauge Gauge Set / Parallel Gauge Gauge (Used) Manufacturer: Richard Knauthe KG – Feinmessgeräte Standort Manufacturer: Limbach-Oberfrohna (GDR) Standard: S4 TGL 12015/I Version: Fine Step Gauge Set for Dimensional Derivation and Fine Adjustment in the Range of Nominal Dimension 10 mm.Condition:Used. Final dimensions optically in good condition, no visible damage or chips. Box with traces typical of age and use. Measuring range / content • Nominal dimension: 10 mm • Fine leveling range: • 9.99 mm to 10.01 mm • Gradation: 0.001 mm • Content: 21 pieces \" Auction-ID: A7-46417-204
Dimension: 2300 x 1780 mm; Not tested; Auction-ID: A7-45992-149
1 needle 3 threads; with superior transport; requires compressed air; servo motor ESDA 220 V; dimension: 1050 x 550 x 1050 mm; Auction-ID: A7-45992-150
\" V-prism set with magnetic V-block – Eclipse – for measuring and fixture work 4-piece V-prism set for use in the measuring room or toolmaking. Included: • 1x Magnetic V-Block, Eclipse (England), ON/OFF switchable • 1x Large Solid V-Prism • 1x Long V-Support Prism • 1x Small V-Prism \" Auction-ID: A7-46417-311
Unused; servo motor; work at 230V; Auction-ID: A7-45992-117
Distance between needles: 12 mm; Auction-ID: A7-45992-53
\" Mitutoyo Digital Measuring Screw Set 0–100 mm, Type 293-946 (MDC-100MST) Digital external measuring screw set consisting of four measuring screws for the measuring ranges 0–25 mm, 25–50 mm, 50–75 mm and 75–100 mm. Version with electronic display and ABS/ZERO function. Supplied in a wooden box with adjustment dimensions and accessories. Sentence complete. Used, good condition with slight signs of wear on the housing and box. • Manufacturer: Mitutoyo • Type: 293-946 • Designation: MDC-100MST • Total measuring range: 0–100 mm • Individual ranges: • 0–25 mm • 25–50 mm • 50–75 mm • 75–100 mm • Reading: 0.001 mm • Display: Digital LCD • Functions: ORIGIN, ZERO/ABS, HOLD • Measuring surfaces: Tungsten carbide • Power supply: Battery • Origin: Made in Japan • Storage: Wooden box with molded insert \" Auction-ID: A7-46417-326
\" Inner measuring screw set (2-point contact) from GDR industrial production, manufacturer Suhl. Measuring range from 60 to 900 mm is covered by several extensions. The reading is done mechanically with 0.01 mm pitch. An original test certificate from HITEC Messtechnik is available. The test was carried out in accordance with DIN 863 Part 4, and the examinee was assessed as fit for use. The test certificate is historical and serves as proof of the previous calibration:Scope of delivery • Measuring head internal measuring screw • Extensions / intermediate pieces according to measuring range • Original wooden case • Original test certificate (HITEC measurement technology) Condition • Used, age- and use-related traces of use • Scales easy to read • Mechanics functional • Manufacturer: Suhl • Design: Internal measuring screw, 2-point contact • Measuring range: 60 ...
\" Schut V-Anvil Micrometer Set – 20–35 mm & 35–50 mm – 0.01 mm – in a case et of two V-Anvil Micrometers from the manufacturer Schut Geometrical Metrology. The micrometers are designed for measurements on cylindrical workpieces (e.g. taps, shafts, cutting edges). • V-anvil micrometer 20-35 mm, reading 0.01 mm (code: 906.162) • V-anvil micrometer 35-50 mm, reading 0.01 mm (code: 906.163) • Measuring ranges: 20–35 mm / 35–50 mm • Reading: 0.01 mm • Design: V-Anvil • Manufacturer: Schut Geometrical Metrology \" Auction-ID: A7-46417-211
Auction-ID: A7-45992-136
With band attaching; Auction-ID: A7-45992-159
Measuring instrument set / measuring equipment lot – 10 pieces, consisting of various internal, outdoor and comparative measuring equipment. 1. Digital U-screw gauge 0–25 mm • Manufacturer: Mitutoyo • Protection class: IP65 (coolant proof) • Reading: digital 2. Mechanical U-meter gauge 0–25 mm • Standard: TGL 1504.6-1 • Manufacturer: GDR production 3. Mechanical U-screw gauge (presumably 25–50 mm) • Manufacturer: not clear • Mechanical scale reading 4. Mechanical U-clamp (small design, tip measurement) • Application: Fine/tip measurement 5. Mechanical tip micrometer • For hard-to-reach measuring points 6. Dial gauge Ø approx. 58 mm • Manufacturer: Mitutoyo • Resolution: 0.01 mm 7. Dial gauge Ø approx. 40 mm • Manufacturer: not clear (German production) • Resolution: 0.01 mm 8. Test wedge / test gauge • Marking: \"Test aid\" • In leather case 9. ...
\" Design: Zero adjuster / tool zero-point setting device Manufacturer: SAV Spanntechnik GmbH Type / Design: SAV 483.02 – Type NE 1 (for vertical probing) Condition: Used, visually very good. Dial gauge functional. No visible damage to the stylus surface or housing. • Reading accuracy: 0.01 mm • Height of housing / reference surface: approx. 49.5 mm • Height of springy sensing surface: approx. 51.5 mm • Housing diameter: approx. 68 mm • Diameter of sensing surface: approx. 45 mm \" Auction-ID: A7-46417-247
Direct Drive; Automatic cutting; 220V; Auction-ID: A7-45992-9
\" Inner measuring screw set (2-point contact) from GDR industrial production, manufacturer Suhl. Measuring range from 60 to 900 mm is covered by several extensions. The reading is done mechanically with 0.01 mm pitch. An original test certificate from HITEC Messtechnik is available. The test was carried out in accordance with DIN 863 Part 4, and the examinee was assessed as fit for use. The test certificate is historical and serves as proof of the previous calibration:Scope of delivery • Measuring head internal measuring screw • Extensions / intermediate pieces according to measuring range • Original wooden case • Original test certificate (HITEC measurement technology) Condition • Used, age- and use-related traces of use • Scales easy to read • Mechanics functional • Manufacturer: Suhl • Design: Internal measuring screw, 2-point contact • Measuring range: 60 ...
\" U-screw gauge set (external measurement) – 4-piece set – with wooden cases – used 4-piece set of mechanical U-clamps for external measurements, mainly in original wooden cases. The measuring screws come from industrial stock, apparently classic German/GDR production (including precision measuring tool factory), some with package inserts and adjustment dimensions. • Type: Screw gauge (outside) • Reading: 0.01 mm • Measuring range: 100 mm (according to case marking) • Design: metric • Cases: wood, partly with accessories / adjustment size \" Auction-ID: A7-46417-222
Compound feed (triple feed) tape binding machine; 220V; Auction-ID: A7-45992-10
\" Test pin post 5–10 mm (5 individual sets) Richard Knauthe KG TGL 13620/I Cylindrical measuring pins stepped 0.05 mm Complete test pin lot consisting of five individual sets in the range of 5.00 mm to 10.00 mm.The sets cover the following ranges: • 5.00 – 6.00 mm • 6.00 – 7.00 mm • 7.00 – 8.00 mm • 8.00 – 9.00 mm • 9.00 – 10.00 mm Each set contains 21 measuring pins in 0.05 mm increments. Finish according to TGL 13620/I.Wooden boxes with signs of use. Measuring ranges: 5.00 – 10.00 mm Graduation: 0.05 mm Total number of pins: 105 pieces Standard: TGL 13620/I Manufacturer: Richard Knauthe KG, Limbach-Oberfrohna Design: cylindrical gauge pins \" Auction-ID: A7-46417-289
UNUSED; 220V; Auction-ID: A7-45992-11
\" MASSI Prism and Clamping Block Set – 3 Pieces – for Round Material / Measuring Station Included: • 2 Solid Cross Prisms (heavy version) • 1 MASSI Step Prism 62 mm (No. 0/238) • 1 Clamping Bracket \" Auction-ID: A7-46417-310
\" RENISHAW TP200 Probe Set with Accessories and Test Certificate Complete probe set from RENISHAW consisting of a TP200 probe (SF MOD) including several M2 probe inserts (straight version, different lengths) and original transport case. The probe has been tested on the RENISHAW Probe Test Rig (Test Passed). A detailed test report / measurement protocol is included and documents the repeatability as well as the preferred movement (pre-travel). Condition / scope of delivery • Condition: used, very good • Probe tested, test passed • Probe inserts mostly new / unused (orig.packaging) Scope of delivery: • RENISHAW TP200 probe (SF MOD) • Several M2 probe inserts • Original case • Original test certificate / measurement protocol • Manufacturer: RENISHAW • Type: TP200 SF MOD + TP200 • Serial number: 4W9T83 • Stylus length (reference): 50 mm • Probing force: 2 g • Te ...
\" Eyltool Internal Gauge Set MB 5–100 mm, 3-piece, Art. 33201100 (incomplete) Internal gauge set for measuring bore diameters in the range of 5–100 mm. Analogue version with a reading of 0.01 mm.The set is incomplete. The measuring range 50–75 mm is missing. The measuring ranges 5–30 mm, 25–50 mm and 75–100 mm are available. Used, with usual signs of use. • Manufacturer: Eyltool • Item no.: 33201100 • Design: Internal gauge set • Total measuring range (original): 5–100 mm • Available measuring ranges: • 5–30 mm • 25–50 mm • 75–100 mm • Missing: 50–75 mm • Reading: 0.01 mm • Measuring type: mechanical, analogue • Unit of measurement: mm \" Auction-ID: A7-46417-329
\" Gauge block set / Parallel gauge blocks – Long end gauge (used) Manufacturer: Längenmesstechnik GmbH Limbach Standard: DIN EN ISO 3650 Tolerance class: Class 2 All gauge blocks with through-holes, design as precision parallel gauge blocks. Condition • Used • Measuring surfaces visually good, with slight traces of use • Wooden cases with signs of wear and tear 4 individual longitudinal dimensions: 1. 200 mm – ID 3064 2. 250 mm – ID 3065 3. 300 mm – ID 3066 4. 400 mm – packed separately \" Auction-ID: A7-46417-205
\" Casting ladle / stopper ladle 0.55 t – Foundry Service Manufacturer: Foundry Service GmbH Type: Plug ladle Capacity: approx. 0.55 t Equipment • mechanical tilting device with handwheel • Traverse for crane transport • Plug system for pouring Condition Machine from stock. Sale as shown. Capacity: 0.55 t Net weight: approx. 260 kg Gearbox type: SG173N \" Auction-ID: A7-46417-380
220 V; Auction-ID: A7-45992-49
Distance between needles: 10 mm; Auction-ID: A7-45992-107
Sewing Machines Zig-Zag three stitch; 220 V; Auction-ID: A7-45992-2
Dimensions LxWxH: 1050 x 550 x 1050 mm; Auction-ID: A7-45992-119
dimension: 1050 x 600 x 1300 mm; Auction-ID: A7-45992-137
\" Cylindrical measuring pins (test pins) for bore testing, fit and dimensional control. What's in the box: • 3× full sets of test pens • Original cases Condition: Used. Traces of age and wear present on cases. Measuring pins optically neat, no visible damage. Cylindrical Measuring Pins / Test Pins – Sets (used) Manufacturer: • Richard Knauthe KG, Limbach-Oberfrohna • Schmalkalden (GDR production) Standard / Marking: • TGL 13620/I • \"Test Aids\" • Accuracy according to marking: ± 0.001 mm • Graduation: 0.05 mm Circumference / Composition Total: 3 complete sets • Set 1: Measuring range 2.0 – 3.0 mm • Set 2: Measuring range 3.0 – 4.0 mm • Set 3: Measuring range 4.0 – 5.0 mm All sets are complete, in original cases (wood) \" Auction-ID: A7-46417-203
Stock number: 4029 Suction Manufacturer: 3NINE LINA, Type: LINA 500 Oilmist Separator Machine NO.: LI500-65-CC-543, Year of manufacture: 2006 Specifications: Fence effect 500m3/hour m/3 Motor power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min./max Degree 5-50 Degree Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg
Used for thinning the edges of leather materials. Auction-ID: A7-46462-11
Laboratory incubaor from the Spanish company JP Selecta Auction-ID: A7-46406-8
2 - the black and white Auction-ID: A7-46462-51
Used for attaching heels to shoes by nailing. Auction-ID: A7-46462-9
PC HP Elite 7500 Series MT Intel i5-3470 8 GB RAM 120 GB SSD, S/N CZC3133NWF, no cables, no software, internal WSSBG071
Efficient and powerful ride-on sweeper from Nilfisk, model SR1100. Ideal for quick and thorough cleaning of large surfaces. Robust, reliable and immediately usable for professional use! Auction-ID: A3-43525-20320
\"Self-service checkout - 365 retail markets G3EL, made in USA Brand: 365Retail Markets Model: G3EL Payment system: Not included The characteristics of this device are as follows: weight: 80kg; power supply: 230 V/50 Hz; dimensions: 2 boxes, 400x500x800mm & 450x500x850mm Note: the pictures are informative, the products are new in boxes\" Auction-ID: A7-46488-12
maximum number of results exceeded
please refine your search
100 € 
