129,507 used machines on RESALE, but how to find them? Machine Search
We sell 250 x HP ProLiant DL380 Gen10 / plus (in total it is approx. 4000 x 64GB memory modules and 500 x Intel Xeon 6342, 6142, 6248R, 6244, 6254 processors) Systems will be only available in approx. 2 months. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested u ...
We sell All systems have installed each 1 x 1TB disk and 1 x Micro SD. 48 x BL460c Gen9 18 x BL460c Gen9 2 x E5-2697Av4 (2.6 GHz, 16 Cores) 512GB (8x64GB DDR4) 48 x BL460c Gen9 2 x E5-2690v4 (2.6GHz, 14 cores) 512GB (16x32GB) 38 x BL460c Gen10 2 x XeonGold 6136 (3.0GHz, 12Core) 768GB (12x64GB) 88 x BL460c Gen10 2 x XeonGold 6248 (2.5GHz, 20Core) 1.5TB (64GB and 128 GB) Total count of HP blades: 240 The hardware will be available in 2 – 3 weeks. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from ...
used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW
We sell 10 x HP DL380 Gen10 Plus each configured with: 2 x Intel Xeon 6342, 2.80GHz 1024GB RAM (16x64GB) No disks, no RAID card. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. ...
Bljalbers BLJ150 pot sealer Serial: 10150002 2010, Stainless pot sealer, seal up to 6 pots at once, adjustable temp control, previously used for 100mm diameter pots, mobile frame, 1Ph
We sell 450 x NVIDIA RTX 6000 ADA, brand-new RTX 6000 Ada | 48GB GDDR6 | PCIe 4.0 x16 | 4× DisplayPort Part No.: 900-5G133-2250-000 (Bulk Pack) EAN: 8592978549763 Brand-new with manufacturer warranty! In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used h ...
We sell 1500 x Atrust Zero Clients, brandnew in original packaging, EU / German systems With this chip: SOC SMSC UFX6000 10/100/1000 Ethernet In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to compan ...
Reference Num.: 3752 Brand: AGFA Type: Dupliphot 740 Available: directly Status: Not in production Location: Deutschland
We sell (We also have available another 3907-ZR1 z14 system with 32GB only.) IBM Mainframe z14ZR1 : 3907-ZR1 IBM z14 1 0019 Manage FW Suite 1 0033 Service Docs Optional Print 1 0083 HMC Table 1 0148 HMC Table Top Keybd/Monitor/Mouse 2 0173 PCIe fanout Gen3 6 0174 Fanout Airflow PCIe 1 0200 Model ZR1 Air Cooled 1 0236 France #189 2 0401 PCIe Interconnect Gen3 1 0426 OSA-Express6S 1000BASE-T 1 0427 FICON Express16S+ LX 4 0622 Switchable PDU 2 0623 Ethernet Switch 1 0638 CPC Drawer Max4 4 0641 CPC PSU 2 0893 Crypto Express6S 1 1079 CP-A 1 1158 1-Way Processor A01 1 1341 A01 Capacity Marker 1 3100 Lift Tool Kit 1 3101 Extension Ladder 1 3539 64 GB Memory 1 3863 CPACF Enablement 1 4001 PCIe+ I/O Drawer 1 7919 Bottom Exit Cabling 4 7943 32A/250V LSZH Cord 1 9883 19in Rack In most cases, the entire lot can only be handed over in its entirety. More informatio ...
Make : Hassia Model : THL 24/28 Stations : Plastic Roll insert— Pre Heat —Forming to Cups —Filling — Sealing — Cutting in Pieces — Robot pick and place — Wrap Around Carton Packer Volume : 10gr -20gr Product : Margarine/Butter Capacity : 37,000 pieces per hour Circles per Min.: 25 Y.O.M : 1986 S.N : 1021800287 Electric : 220 ~ 3 / 50hz / A: 65 Weight : 5000kg Dimensions : 5500 x 800 x 1700 Air : 6 Bar
Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 20 ...
new rear light, incorrectly ordered, from stock
Moog Servo Valve Unit D665-5703 & D661-5623C High Performance Valve Module For sale is a fully functional, industrially used high-performance servo valve unit from MOOG, consisting of two perfectly matched valves Also available as a single component ! Moog D661-5623C – High-Response Valve Technical Property Value Model name: D661-5623C Type code G18H0A0NSA0HP Valve type 4-way, 2-stage with bushing slider Nominal volume flow 120–200 l/min (depending on version) Operating pressure P, A, B max. 350 bar Return pressure T (internal) 210 bar Return pressure T (external) 280 bar Control pressure 25–350 bar Coil stroke ±0.13 mm Control surface (AK) 1.35 cm² Actuation time (0–100 %) approx. 14 ms Hysteresis < 0.6% Zero displacement < 1% Supply voltage ±15 V DC Input signal ±10 V IP65 protection Mass approx. 5.7 kg Connection diagram ISO 4401-05-05-0-94 ...
Process chiller / chiller air-cooled, Type: Galaxy GLT 135 SHE MTA S.p.A., The Galaxy GLT 135 SHE are compact chillers designed for outdoor installation (from -20°C to +43°C) are suitable with plate evaporator, scroll compressors, control and control cabinet, shut-off valves for compressors, equipment for low ambient temperatures down to -20°C (EC fans), P2 pump, 510 litre buffer tank, electr. Antifreeze heating, condenser filter mats incl. Vitaulic couplings. Cooling capacity (kW): 354 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 60.7 Available pump pressure bar: 2.51 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 6 Power levels (%): 0-17-33-50-67-83-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 167.7 Ma ...
With the Xpress you get a reliable and easy-to-use product with the laser software MARKER, which is adapted to your individual requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. Convince yourself of our Xpress: Make an appointment with us and bring samples of your materials to be processed. We would be happy to introduce you to our Xpress. Laser safety goggles are required for this system. We offer these for spectacle wearers and non-spectacle wearers. Laptop/PC customer provision!
Shell sealer Rühle VR1, built in 2005, in a good used and functional condition. Metal parts made of stainless steel. Packaging machine / tray sealer with scale and label printer, weighs, packs and labels the goods in a single operation. PC control. Supplied with two mould inserts. Machine is prepared for fumigation. Machine is rollable. Dimensions W/D/H 60/70/170 cm. Power ratings 230 Volt, 1,5 kW. Workshop tested, immediately ready for use. More on request.
With new 1.500mm. wide belt and new control-unit. Will be overhauled, sandblasted and painted.
Process cooler, chiller, chiller - air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 902 P3 TAEevo Tech 902 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 90 Max. current (A) 160 Starting Current Circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of const ...
Automatic tube filling and sealing machine for PE and laminate tubes including: - Format set D.19 and D.35 - Tube magazine for empty tubes - automatic tube orientation - Hot air sealing unit Leister - Coding device on the tube fold on one side - water-cooled sealing jaws - cooling of the weld seam with cold air gun - Siemens PLC - 50L product hopper
Tray sealer few operating hours with shell storage shell size: 350 x 350 mm Top foil: Max. 420 mm Power 6 to 15 cycles / minute Delivery time: 2..3 weeks
Caterpillar piston + segment ring, for engine 3412 Part number: 137L12A3
Process air cooler/chiller/chiller, air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 1002 P3-20-OFF – 200 kW TAEevo Tech 1002 P3-20-OFF are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump (pump on the intake side miontized) and winter package -20°C (speed control of the fans, condenser pressure control). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Prote ...
A Complete Turnkey Solution: ‘FIVES DMS Montbard & SMS MANNESMANN MEER’ 8" Seamless Tube Plant Once known as Vallourec Bearing Tubes Montbard, this facility can produce hot and cold rolled seamless high precision tubes up to 203 mm OD and 2 to 55 mm wall thickness based on a long-established state-of-the-art manufacturing process. Make (main): · FIVES DMS MONTBARD · SMS MANNESMANN MEER Mothballed since: 2025 Capacity: 80,000 tons per year Processed material: CrMo, CrMn alloyed steels Starting material: 80 – 240 mm round billets End products: o Hot Rolled Tubes up to 203 mm OD; 8.0 - 53 mm WT o Cold Rolled Tubes 25 - 102 mm OD; 2.0 - 20 mm WT Consists of: Billet Yard Hot Rolling Mill incl. Furnaces, Piercer, Elongation, Calibration, Sizing mill, Cooling bed (7) Cold Pilger Mills Heat Treatment Furnaces incl. Quenching ...
MANUFACTURER: Westfalia TYPE: MSD 50-01-076 CAPACITY: 5.000 Lt/h for milk skimming & 7.000 Lt/h for whey skimming. MACHINE COMES WITH: Tools and instructions book
PRODUCT DESCRIPTION MANUFACTURER: Westfalia TYPE: MSE 25-01-177 YEAR: 2011 CAPACITY: 2500 Lt/h MACHINE COMES WITH: Tools and instructions book.
Reepack Reeflex 150 Ecoline tray sealer Manufacturer: Reepack srl, Italy Type: ReeFlex 150 Ecoline Year: 2011 Stainless steel Mold: baguette format, 300 mm x 85 mm, 3 times Speed: 6 – 15 / min. Power: 400 v., 50/60Hz, 3-phase Weight: 1000 kg Dimensions: L 4060 mm x W 1300 mm x H 1820 mm
Three-phase permanent magnet motor 3-phase permanent magnet motor used, normal condition used, average condition Please note: we got several new Bosch Rexroth servo drives in stock! We have a selection of new Bosch Rexroth servomotors in stock! Please contact us.
Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - Blank tube magazine incl. tube feeding chute for autm. Entering the blank tubes - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 19mm - 50mm tube diameter - Cycle rate 15 - 30 tubes/min. Depending on product Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack
Ultrasonic tube filling and sealing machine with the following equipment: - Basic machine - automatic tube alignment according to the typeface or identification mark - Ultrasonic capping unit for closing PE and laminate tubes - Coding device on the tube fold, one-sided, incl. 4 set of coding numbers (0-9) - Cutting device on the tube fold - 1 format set for PE tube size D.35 mm - Format range 13mm - 50mm tube diameter - Cycle rate 10 - 15 tubes/min. Depending on product and operator Please also note our current machine offers ( NEW + USED ) on Resale under : abc://abc.resale.de/angebotelinkd-user.php?myid=35837&dealer=1&order=1 & abc://abc.resale.de/angebotelinkd-user.php?myid=35846&dealer=1&order=1 & Visit us also on : cbv-pack
The machine is used for Vacuum Thermo sealing with optional inert gas injection for PVC trays and has a Buch vacuum pump. In the kit with the machine we also have a die and a thermal sealing head, set with r/r: 325mm×265mm. The machine also has plate forms for plates: 150×150mm and 145mm×240mm of each ×2 pcs. And 150mm×220mm 2 pcs. The machine comes with 1 year warranty, delivery, installation, samples and training
Environmental protection. Improved separation. Also separates stable emulsions. Meets the strictest purity requirements. Highly efficient. Equipment in detail Maintenance indicator Easy maintenance Filtration Polypropylene for free oil particles Activated carbon for unstable emulsions Organoton for stable emulsions Efficiency with activated carbon Max. oil content at outlet 10mg/l Efficiency with Organoton Max. oil content at outlet 5mg/l Technical data Max. compressed air output (medium climate) without dryer & filter 6.3 m³/min Max. compressed air output (medium climate) with dryer & filter 3 m³/min Condensation Tube 2 x 1/2" Water drain 2 x 1/2 " Condensate inlet temperature min. / max. 0 / 60 °C Dimensions and weight Length x width x height 390 x 278 x 428 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Curb weight approx. 5.8. kg ...
TO WHOM IT MAY CONCERN ; WE VE 4 SETS USED GEA WESTFALIA HFO SEPARATORS OSD 35 AT OUR STOCK . SEPARATORS HAS ALSO CONTROL PANELS SEPARATOR DETAILS ON BELOW TYPE. : OSD 35 -136-067/35 SERIAL NO. : 9052-289 / 9052-288 / 9052-293 / 9052-206 YOB. : 2010 BOWL SPEED : 8200 SOLID kg /dm3 : 1.4 EX STOCK . READY TO TRANSPORT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
WESTFALIA KDA 16-02-177 QUARK & YOGHURT SEPARATOR CAPACITY: 1.000 KG/H PRODUCT SOME PARTS ARE MISSING PLEASE CONTATCT FOR MORE INFORMATION
WESTFALIA SAMM 12006 CREAM SEPARATOR FOR MILK & WHEY CAPACITY: 12.000 LT/H COMES WITH A SPARE HYDROULIC CLUTCH
Servomotor, 330V, 4000 rpm, B2.SM.000-4400, KEB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Unfortunately, the packaging is not visually perfect on the outside., - Shaft D11mm, centring D60mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our ...
used
The scope of delivery includes: 01x Standard divider strip, used Material colour: sendzimir galvanised Overall length: approx. 2,440 mm Separation strip length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (HxW) Single-sided protective plug Weight / piece: approx. 2.19 kg The price shown corresponds to the pick-up price (unit price) incl. VAT. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881
maximum number of results exceeded
please refine your search
