se shredder used for sale

GT-5290 Ripper - Brand: SCOINER - Model: 150/1300/100 - With horizontal hydraulic pusher and vertical hydraulic pusher - Rotor length: 1450 - Diameter: 500 - Engine: 100 hp (75 kw) - Dice: 30x30 - With hopper - With electric control - Year: 2000

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

Manufacturer: Lindemann Model: LU800 / 8P A60 Year of Manufacture: 1994 Hours: 46,900 (currently still running) - Blade width 80x80 - Box length - Bed dimensions: 5.80 meters long / 2 meters wide - Drive power: 4 motors from Schoch GmbH No. 9140231/9, year 1994, 90 kW each - Lindemann Scissors Find more here - / Contact us at -

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Shredder of the leading company LINDNER model: KOMET 1800 single shaft number of knives 50pcs. Ideal for SRF/RDF (paper, plastic, fabric, wood), accompanied by the electrical panel and the control panel. Drive motor: 200Kw ABB 400V/50Hz Hydraulic unit: Dorninger-Heavy Duty 1:65lt/min ,Drive Capacity:11Kw The machine is in excellent condition, being sold due to replacement with a new more advanced model.

Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -

Manufacturer: HAAS Model: TYRON 1500 E Year of Manufacture: 2014 Machine Type : stationary electric twin shaft primary shredder Tool configuration: special reinforced tooling, 4-part with 7/6 discs per shaft Shaft speed: infinitely variable, approx. 0 to 32 rpm Counter-comb bar: included Raised tipping hopper: included Drive Unit - Drive power: 2 x 90 kW - Central lubrication: for all 4 main bearings Electrics / Control - Display: IFM display - Remote control: radio remote control included - Shredding programmes: 4 pre-set programmes (wood, waste, special, green waste) Discharge Conveyor - Discharge conveyor: included Find more here - / Contact us at -

We are selling a shredding and processing system for printer toner cartridges. The system is also suitable for processing small and medium-sized waste electrical and electronic equipment (WEEE).It was only in operation for five years and has already been professionally dismantled. This shredding and processing plant for toner cartridges was developed to efficiently separate valuable materials and reuse them in the recycling process. Through the use of high-performance machinery and intelligent separation technologies, this line enables the sustainable and economical recovery of metals and plastics from toner cartridges.The process consists of several stages: First, the modules are shredded, then sorted and finally separated in order to optimally process the different material fractions. Machines and processes of the plant. 1. Feed dispenser with big bag unloading station – length 5  ...

A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...

Chopper / universal / mill NAGEMA-FeumaProduct descriptionManufacturer: Nagema VEB Feuma GössnitzType: HU-1Year of construction: 1981Condition: used, baker's conditionOn wheels, mobileDetails see pictures.

Food processor / universal - food processor NAGEMA HU-1 Product description Manufacturer: Nagema VEB Feuma Gössnitz Type: HU-1 Year of construction: 1982 Condition: used, bakery condition On castors, mobile Details see pictures.

ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm

Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

agicom recycling machine trade: The used single-shaft shredder from Tecnoecology is extremely powerful and is ideal for shredding cables, but also for composites and plastics. Equipment: hydraulic pusher. Number of blades: 7+8 (rotor + stator) Rotor speed: 130 rpm Cutting rotor: Ø 180 mm - 500 mm Electric motor: 17.0 kW, 380 V Weight: approx. 1,200 kg Dimensions: approx. 1540 x 1150 x 1700 mm Throughput: max. 200 - 400 kg/hour Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage

Shredder for waste wood and biomass, 2-stage ( stage 1 = Doppstadt DW 3060 buffalo ---- level 2 = AK 630 ), 2 large magnets INCLUDED, air classifier on the discharge belt included. Completely ready for use. Engine (Volvo approx. 700 hp / 515 KW

TECHNICAL DATA: Hopper opening: 700 x 360 mm Installed power: 15 kW Rotor: 600 x Ø 252 mm

BANO UNIMAC 180/70CP Mod.S, reinforced structure Hopper: 1.830 x 1.300 mm, Hopper capacity: 2.340 lt. 132 KW a.c. drive Rotor: 1.700 mm wide Rotor diam.: 660 mm. Rpm: 80-140 Outer diameter: 700 mm. Outer length 1800 m. Rotor knives: 60×60 mm. Screen: 30 mm. (or bespoke) Ram stroke on 600 mm. Side ram + upper ram Hydraulic pack Dimensions LxWxH: 2400x3600x2450 Construction year 2005 The machine is offered totally and professionally reconditioned (images show the machine once reconditioned) User manual + drawings + CE, installed power - used power in work: about 60-65% : 132 kW, conditions: Reconditioned, availability: 40 days ca from confirmation , type: Single shaft

MUTTON 750 E Drive 2 x 110 kW electric with long discharge conveyor belt The following work was carried out: 2 pieces of hydraulic motors overhauled 2 pieces of hydraulic pumps overhauled new fan new belt on the conveyor belt New drive roller for the conveyor belt Service carried out incl. oil change COMPLETELY OVERHAULED READY TO USE

GOOD CONDITION SHREDDER type TEREX Ecotec TDS 820, good condition Year of construction 2020 Only 2700 hours Weight 27500 kg

- Shredder Lindner Komet 1750 - Motor 160 kW - Without control cabinet and hydraulics. - With complete documentation (wiring diagrams, hydraulic diagrams)

- Shredder EUREC S 20.00 D - Year of construction 2008 - Ready for operation - with spare parts

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-45833-56

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg MACHINERY WITHOUT CE MARKING, NOT COMPLIANT WITH EU DIRECTIVES, INTENDED EXCLUSIVELY FOR NON-EU MARKETS Auction-ID: A7-45834-56

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-45833-138

Twin-shaft shredder, 380 volt power supply, ideal for plastic, wood, iron chips, paper. Loading mouth 620 x 570 mm, working area 350 x 300 mm, never used 0 hours Overall dimensions: 1500 x 1000 x 1500 mm Weight: 1000 kg Auction-ID: A7-45834-138

Document shredder IDEAL 2400 CrossCut 2x15 mm, built in 2006

Document Shredder AMAZON Basics 8 Sheets

Petrol vacuum shredder STIHL SH86, nameplate not traceable

Code: 0369 Brand: ISVE Model: 25/66 Rotary blade grinder for wood scraps, plastics, packaging, nut shells, fruit stones and pits, leather scraps, wood bark, loppings of trees, and other materials Motor Hp 7,5 (Kw 5,5) Inlet opening diameter mm 250 x 660 It can be connected to a dust collector using a tube placed under the screen Overall dimensions: mm 930 x 770 x 1800 h Weight kg 680

Cabbage shredders S65 Cabbage cutting machine 2020, Stainless, cabbage shredding machine, with two top mounted de-stalkers, 5000kgs - 7500kgs per hour, disk diameter 650mm can be used for whole large cabbage heads, mobile, 3Ph

Document Shredder REXEL 60X, S/N PM2013000946

Rotor shear Loaded freely in working order. Cutting table weighing 25.5 tons 270 kw power

Weima Type: ZM 30 Motor 2x 11kW Hours: 1243 Feed size at the bottom approx. 500x450mm Hopper at the top approx. 1m x 1.2m Transport Dimensions Height 2m, Width 1.6m, Depth 1.6m Weight approx. 1400kg We have been engaged in the sale of woodworking machines for 25 years. Our machines are 100% inspected before sale, and we attach great importance to the satisfaction of our customers. You are welcome to visit and try out the machines in advance to convince yourself of their quality and functionality. If you have any additional questions, please feel free to give us a quick call or send us a message. Net price plus VAT

JBF UC 47 Shredder Motor 7.5KW Cutting shafts approx. 47cm long x 50cm wide Low-speed manufacturer, German manufacturer Weight approx. 1t Long 1.90cm High 2.30cm Wide 1.10cm We have been engaged in the sale of woodworking machines for 25 years. Our machines are 100% inspected before sale, and we attach great importance to the satisfaction of our customers. You are welcome to visit and try out the machines in advance to convince yourself of their quality and functionality. If you have any additional questions, please feel free to give us a quick call or send us a message

VREDO Self-Propelled Trac – Wood Processing / Infeed System General data: Manufacturer: Vredo Machine type: Self-propelled processing unit Year of manufacture: 2012 Equipment: FTG 400 infeed crane with tree clamp 3x infeed rollers Folding hopper Wear plate blow pipe Description: Self-propelled VREDO Trac unit equipped with infeed crane and wood handling system, designed for forestry or biomass processing applications. The machine enables efficient feeding, gripping, and processing of logs or branches, making it suitable for wood chipping, shredding, or biomass preparation operations. Auction-ID: A7-40553-27

Suitable for metal chips Auction-ID: A1-41995-13

Unaudited Auction-ID: A7-46327-142

Festool Domino DF 500 Q-Plus Set with DS 4/5/6/8/10 Dowel Set and Spare Dowel - Milling machine with all stops in Systainer -Replacement milling cutter - Dowel set Systainer DS 4/5/6/8/10 1060 BU - approx. 3500 dowels in a cardboard box Auction-ID: A1-46501-800

huge quantity of refractories! Cordierite, Siliciumcarbide, recrystalized Siliciumcarbide, Mulite, etc. If you need something, don´t hesitate to contact me! j.schmidling@ceramicinfocenter.de

Converter, control, pneumatics -Festo product number: 12592 -Number: 22 pieces available -Price: per piece -Weight: 30 g

Fiber optic amplifier, fiber optic sensor -Manufacturer: Keyennce -Type: FS-V31CP -Weight: 0.2 kg

Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 3/4 inches -5x cutting tips: 1/8, 1/4, 3/8, 1/2, 3/4 -Number: 1x sets available -Price: per set -Dimensions: 645/100/H70 mm -Weight: 5 kg

Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Outputs: 2 -Connector: M-8 -Expansion unit: PNP -Weight: 0.2 kg

Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 -Connector: M-8 -Expansion unit: PNP -Weight: 0.2 kg

Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 -Connector: M-8 -Expansion unit: PNP -Weight: 0.2 kg

Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 -Expansion unit: PNP -Weight: 0.2 kg

Auction-ID: A7-45393-39

Auction-ID: A7-45393-37