127,375 used machines on RESALE, but how to find them? Machine Search
MOCO AZ11 TWIN-SHAFT SHREDDER Manufacturer: MOCO Type: AZ11 Shaft length: 400 mm Dimensions: 2320 x 1000 x 1950 mm Weight: 1300 kg Installed power of main engine: 15 kW Shredding knives: 2 X 12 ROTATING BLADE (+ CLEANING BLADES) THE SYSTEM MOCO AZ 11, shredder with slow and low noise running hexagon working shafts. Low vibration and minimal maintenance, compact design, robust welded construction, low power consumption, individually replaceable cutting discs. THE ELECTRIC The control of the AC geared motor is equipped with an automatic overload-dependent reverse control. The machine can be inspected in our warehouse in Székesfehérvár-8000 Hungary. For further information please contact us.
Rated power kg/h 1500 kg/h Engine power 11 (15) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A Laenge 810 mm width 725 mm He he 1570 mm weight 133 kg Material 1.4301 / AISI 304 Sieve 5mm ; New machine - best condition
NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 11,5 kW dimensions of the machine (l x w x h) : ± 2.100 x 1.070 x 1.300 mm capacity : ± 2.500 kg / h for blocks of max. ± 470 X 600 X 200 mm 3 x 400 V
Part Number: 7361 SPECIFICATIONS - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2pcs - sieve dimensions 60x60mm - 2 toothed pulling shafts from below - lower shaft motor 1.8kW - 2 toothed pull shafts from above - upper shaft motor 1.8kW - belt feeder - length of the feeding belt 2200mm - width of the feeding belt 330mm - main motor 22kW - autorewers - reverse gear - total dimensions length/width/height 4100x1350x1100mm - weight 1800kg ADVANTAGES – made in Germany – autorewers – reverse gear – used chipper, very good condition Net Price: 66900 PLN Net price: 15580 EUR calculated according to the price of 4,30 euros (With higher fluctuations the price may change)
Hump Shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of Make: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: fast-running shredder shaft with counter comb Remark: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by arrangement. We are also happy to carry out tests with your material on request for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The ...
Cutting sets and moving in snails Suitable for Stephan Machines
Small shredder for various tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connectors for connecting a cooling device (e.g. when used for NYM old cables. The machine is 1 year old and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.
4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)
Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.
NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 18,5 kW speed of the cutting drum : 112 rpm dimensions of the machine (l x w x h) : ± 2.950 x 1.600 x 1.780 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 7.000 kg/h for blocks of max. ± 810 x 650 x 350 mm number of knives: 7 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in Dolav boxes 3 x 400 V, 50Hz weight : 1.860 kg
NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 9,2 / 11,5 kW speed of the cutting drum : 1st speed - 70 rpm / 2nd speed - 140 rpm dimensions of the machine (l x w x h) : ± 2.350 x 1.140 x 1.410 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 4.000 kg/h for blocks of max. ± 420 X 650 X 250 mm number of knives: 4 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in 200L eurobins 3 x 400 V, 50Hz weight : 980 kg
Working Width: 800 mm Working Height: 300 mm Main Motor Power: 250 KW
NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.
Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row
Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.
Spare parts for raw material shredder Baader 152 (Raw Material Crusher Baader 152). Almost all spare parts are available in stock or at short notice. Alternatively, a new machine can be offered. Please contact us.
Shredder, rotor shears, plastic shredder, garbage shredder, two-shaft shredder, two-shaft shredder, used shredder 13 knives each approx. 300 x 36 mm each shaft is driven separately Insertion approx. 1450 x 1000 mm Platform height: approx. 1000 mm Drive 11 kW and 5.5 kW, 380 V Dimensions: approx. 3500 x 2000 x 3500 mm For crushing plastic, paper, cardboard, files, canisters, cans, floor coverings and the like.
Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.
Cove Equipment Shredder Model: SH-5 Stainless shredder, continuous process, ideal for chicken and pulled pork, 750Kgs per hour, 1Ph
-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)
Construction debris / concrete shafts, suitable for Arjes Impactor 250 with quick-release cassette and dust-tight bearing lid - ready for installation - incl. transport frame ! We are happy to take care of the transport for you and build a professional !
XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!
Inlet: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm
CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)
PART NUMBER: 7649 Specifications: - inlet width 900mm - inlet height 300mm - shaft width 1030mm - shaft diameter 700mm - knife length 1030mm - number of knives 3pcs - sieve dimensions 70x70mm - 2 toothed pulling shafts at the bottom - lower shaft motor 7.5kW - 2 toothed pulling shafts from above - upper shaft motor 7.5kW - belt feeder - redler with chain belt 5600mm + 10600mm 2.2kW - width of the feeding belt 800mm - main motor 90kW - reverse gear - total dimensions of the machine length/width/height 3300x3100x1700mm - chipper base dimensions 3300x2080x1940mm - feeder / redler dimensions length/width/height 5600x900x1000mm + 10600x1050x1600mm - Base size for the feeding belt 5100x1300x2520mm - total weight about 16000kg ADVANTAGES – made in Germany – a chain conveyor of the redler type, equipped with scrapers – reverse gear – used chipper, very ...
used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1990 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 78 kW Rated current: 150 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press. ...
used heavy duty paper pulper Manufacturer: PAAL Type: PAL-1800 Year of Make: 1996 Main parts of the machine: 1 drive housing with rotor and externally mounted motor 1 slot 1 Electrical control Weight of the machine approx.: 9,000 kg Capacity up to approx.: 35,000 kg/h Main drive power: 75 kW Total connected load: 82 kW Rated current: 162 A Operating voltage: 400 V, 50 Hz Filling width approx.: 1,800 mm Filling opening approx.: 1,800 x 1,972 mm incl.: 1 set of vibration dampers Functioning: The compact and, above all, large-piece paper types to be shredded must be conveyed into the discharge chute in the correct dosage using a conveyor belt. The rotor tears the material into pressable material and hurls it into the ejection hopper, which is open at the bottom and conveniently located above the conveyor belt leading to the press. T ...
Styrofoam shredder MAXI XL 1400 x 560mm MAXI 1400 x 600mm JUMBO 1800 x 800mm Insertion opening: L x W Polystyrene shredder MAXI XL: 1400mm x 560mm Polystyrene shredder MAXI: 1400mm x 600mm Polystyrene shredder JUMBO : 800mm x 800mm Dimensions: L x W x H (dimensions without blower) Polystyrene shredder MAXI XL: 2.4m x 0.9m x 1.6m Polystyrene shredder MAXI: 1.9m x 0.8m x 1.8m Polystyrene shredder JUMBO: 2.4m x 1.1m x 1.8m Motor power/connection/power conveying fan: Pre-shredder / conveyor blower Polystyrene shredder MAXI XL: 5.5 kW | Blower 2.2 kW Polystyrene shredder MAXI: 6.2 kW (with built-in screw under the pre-crusher) | Blower 2.2 kW Polystyrene shredder JUMBO 11.2 kW (with built-in screw under the pre-crusher) Conveyor blower 5.5 kW Throughput (EPS) Polystyrene shredder MAXI XL: 8-10 m3/h Polystyrene shredder MAXI: 25-30 m3/h Styrofoam ...
Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.
Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.
Strand granulator type: ASG-4-63 without feed The GRANULATOR ASG 4-63 is only suitable for the cutting/granulating of semi-hard thermoplastics and is used in the regranulation /recycling of plastics on/on an extrusion line Up to 4 pieces of individual plastic strands with the Ø of 4 mm can be fed to the cutting rotor via a separate feeding unit, usually strip or roller puller. The part/granulate length is proportional to the feeding speed and can be adjusted by changing the rotor speed. Speed rotor max. 380 min-1 Ø Feed strands max. 4mm Cutting force : ~410 N EL connector: 400VDC 16A
Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW
Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/
Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Input material Material: Wood from a carpentry workshop Description: Softwood, Particleboard, MDF Condition / Condition: loose Dimensions LxWxH: ≤ 500 x 200 x 50 mm Moisture content: ≤ 15% Metal Inclusions: No Inadmissible feed materials: ≥ 150 mm nails and ≥ 6 mm screws Loading type: manual Staple Removal of wood chips: on-site extraction Conditions Location: in a hall Ambient temperature: +5° to +40°C Humidity:
Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual
Specifications Cutting width: 7.5x40-80 mm Year of construction: 1999 Productivity: approx. 300 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250 mm/s the safety step: 2+1 wg DIN 32757 P-1,O-1,T-2 wg. DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Pressing force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity: - Bale weight: - Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Axtor 6010 Category: Universal Shredder Manufacturer: Komptech Serial / reference number: 249037 Hours: 4 620 Power: 433kW/589 hp Weight: approx. 25 000 kg Emission class: Tier 4 Final / Stage IV Equipment and description: Overbelt magnet Remote control Advance device Shredder, chipper blades or cantilever chairs Material: good for green waste, bark, logs, splinters and wood waste 2 drum speeds 460 / 810 rpm (modification for cantilever chairs) Drum width 1,543 mm / Drum diameter 1,108 mm / 32 tools, blades Filling height: 2,800 mm / Screen baskets: 60×60, 80×80, 100×100, 125×125 etc. possible / other sizes can be produced Throughput depending on material and operator between 100 and 300 m3/h / Feed hopper over 4 m long / noise emission: 122 dB (A) Transport Dimensions: Length: 11,700mm; Height: 3,750mm; Width: 2,500mm; Towing eye: 50mm
Builder: GREEN TECHNIK Model: BS 750 PTO Engine: 66 kW (90 HP) Data: L. 5.700 mm x W. 1.920 mm x H. 2.900 mm Year: 2003 Hourly Production: 25 m³/h Shredding System: 64 HAMMER
maximum number of results exceeded
please refine your search
