se shredder used for sale

Servoazionamento Selema da magazzino ricambi, revisionato, no smontaggio

Accessoriata di robot JROBI mod. ROBBI 3 Macchinario visionabile zona Lazio

VASO DI ESPANSIONE IN ACCIAIO. ALTEZZA CM 245, DIAMETRO CM 100 CIRCA

Servomotore Selema T-1-M2-060-17-02-C1 180 V 0,75 kw 6000 rpm

SERVO DRIVE - SELEMA Modello: F1 FORMULA Codice Produttore: 09 F1 B2 07/15 220V

Corsa asse X - trasversale : 1000 mm Corsa asse Y - estrazione : 410 mm Corsa asse Z - verticale : 1000 mm N. 1 comando pinza n.1 comando vuoto Ribaltamento pinza 0° - 90° pneumatico

SERVO DRIVE - SELEMA Codice Produttore: 09 F1ECOD0615

SERVO MOTORE BRUSHLESS - SELEMA 180 V; 5,2 A; 0,75 kW

MODELLO: 09 F1 B2 07/15 ANNO: 1999/2000 MATRICOLA: 5340/10121

Servo drive Selema 09 F1 B1 0515

SERVO DRIVE - F1 FORMULA - SELEMA Cod. Produttore: 09 F1 B21020 Tipo: 220 V; 3 PH; 2,6 kW.

Regolatore di flusso a 6 vie

Servo drive Selema 09 F1 B1 0515

Unità di periferia decentrara composta da vari moduli I/O B&R

scheda interfaccia robot Sandretto da magazzino ricambi no smontaggio

Servomotore Selema T-1-M2-060-17-02-C1 180 V 0,75 kw 6000 rpm da smontaggio

Scheda Sandretto da magazzino ricambi no smontaggio

Braccio verticale completo Campetella Corsa : 1800 mm

Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additio ...

Lathe Mori Seiki SL25

This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details.

This 4-axis MORI SEIKI RL2500 was manufactured in 2003. It features a maximum turning diameter of 400 mm and includes two turrets with 12 stations each, providing efficient machining capabilities. The machine is equipped with a Mori Seiki MAPPS MSX-501 control and has a spindle speed of 3500 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI RL2500 multi-spindle turning machine we have for sale. Contact us for further details.

This 4-axis MORI SEIKI SH633 was manufactured in 2001. It features an X-axis travel of 840 mm, Y-axis travel of 760 mm, and Z-axis travel of 840 mm. The machine is equipped with 2 pallets, each measuring 630 x 630 mm, and can handle a maximum workpiece weight of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SH633 horizontal machining centre we have for sale. Contact us for further details.

This 3-axis DMG Mori Seiki DMC 635V ecoline was manufactured in 2013. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine is equipped with a maximum spindle speed of 12,000 rpm and a tool magazine that holds up to 30 tools. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki DMC 635V ecoline vertical machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2013. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and weighs approximately 10,000 kg with the rotary table. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2012. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and includes a rotary table, CONSEP chip conveyor, and KNOLL coolant filter unit. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2011. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum spindle speed of 14,000 rpm and a robust table size of 400 x 400 mm, with a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking to get high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining centre we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details.

This 3-axis Sepro PIP-55 gantry robot was manufactured in 2020. It features a maximum power of 40 VA and operates at a voltage of 230 V. With a weight of only 2 kg, this compact robot is designed for efficiency. If you are looking to get high-quality automation capabilities, consider the Sepro PIP-55 gantry robot we have for sale. Contact us for further details.

Hygienic robot, suitable for food and medical industry. Pick and Place Robot Model: KUKA 3 D1200 HM/SEL Number of available: 24 robots Year: 2021 Load capacity: 3 kg Reach: 1200 mm Control: KR C5 KSP

· Manufacturer: Sennebogen, · Model: 835 E (wheel machine), · Year of construction: 2006, · Operating hours: approx. 22,400 h, · Operating weight: ca. 46 t, · Motor: Cummins, 224 kW, · New motor: installed 2021, · Gripper: K18, · Drivers cabin: E270 hydraulically height-adjustable

CONTROLS   CNC controls FANUC 18 MB WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 840 mm   Y-axis travel: 860 mm   Z-axis travel: 840 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° TABLE   table surface (left-right): 630 mm   table surface (front-back): 800 mm   workpiece load (max): 1500 kg SPINDLE / HEAD   spindle type: horizontal   spindle revolutions (max): 8000 /min TOOL MAGAZINE   number of positions: 140 AUTOMATIC WORKLOAD EQUIPMENT   store type: table changer   number of store positions: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 19000 kg ATTACHMENTS   chip conveyor: yes   coolant unit: yes   band filtration unit: yes   through spindle c ...

This 3-axis MORI SEIKI SL-253B MC/1000 was manufactured in 2000. It features a maximum turning diameter of 260 mm and a turning length of 1,035 mm. The machine is equipped with a spindle speed range of 35–3,500 RPM and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-253B MC/1000 horizontal turning machine we have for sale. Contact us for further details.

CNC vertical machining center Type: SV 1350 Manufacturer: Akira-Seiki Year: 2012 Control: Mitsubishi M700 Hours: 22858 X: 1350 mm Y: 640 mm Z: 750 mm Table size: 1500 x 600 mm Spindle speed: 10,000 rpm Spindle taper: SK40 Tool magazine: 36 positions Internal cooling Chip conveyor Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC vertical machining center Type: SV 1150 Manufacturer: Akira-Seiki Year: 2011 Control: Mitsubishi M700 Hours: 18427 X: 1150 mm Y: 640 mm Z: 750 mm Table size: 1300 x 600 mm Spindle speed: 10,000 rpm Spindle taper: SK40 Tool magazine: 36 positions Tool and work probe Machine in good condition, fully functional, under power Find more here - / Contact us at -

Point filling device for pastry line Year of construction 2019 for semi-liquid masses 6-row Output 5-60gr per swab with manual control Working width approx. 600mm incl. funnel approx. 32l Stainless steel clad with system plug for composite or solo machines Pneumatically operated: operating pressure 6 bar Air consumption 510l per min

Key data: 63 KW, 73 kVA, 400 V

senergino Gas Generator (CHP) SBG 50EL 4.12 TI. E Gas electricity and heat generators from 2011 with unknown operating hours, closed unit with control. 63 KWel x 1,500 rpm, 400 V/50 Hz. Leroy Somer LSA 43.2L8 C674, 73 KVA Manufacturer: senergino Model: SBG 50EL 4.12 TI. E Type: Natural Gas Electricity and Heat Generator Serial Number: D2N002416 Power [KWel]: 63 Voltage [V]: 400 Current [A]: 105 Frequency [Hz]: 50 Year of Make: 2011 Operating hours: unknown Weight unit [kg]: 1,940 Dimensions LxWxH [m]: 2.95 x 1.00 x 2.20

: neu : ca. 10 Wochen ab Auftrags : Türkei : 159300 € : 3010.77 € : 320 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3600 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 5300 mm : 1910 mm : 3230 mm : 20100 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm  ...

General SKU300U581 LocationBarneveld CEcheck MakeServoloft GmbH TypeLabor Mischer Main Features MaterialStainless steel Volume20 Ltr. Motor0.75 KW Specified Features - Tumbler mixer Tumbler mixercheck Barrel mixercheck Capacity20Ltr, 10Ltr(2x), 5Ltr. Diameter350mm, 270mm, 220mm Length/Depth327mm, 259mm, 195mm Cylindrical length140mm, 122mm, 90mm Conical length187mm, 137mm, 105mm InletDia: 170mm OutletDia: 50mm With motor0,75kW 230/400Volt, and 0,12kW, 230/400Volt With brake motorcheck Speed mixerX-axis 3-12 rpm, Y-axis 5-20rpm MaterialStainless steel 1.4435 (316L) Information No.10323 Year of construction2001 Mounted on stainl. steel framecheck With switchcheck With switchgearcheck(as is) Floorspace1.46x0.79m Total height1.6m Weight450kg Extra SpecificationsThis tumble mixer from Servolift mixes along the X-axis and the Y-axis. The maximum weight to be m ...

Codimag Viva 340 6 colours Semi Rotary Offset Press from 2004 Semi Rotary Waterless Offset Press 1 Screen printing unit 6 x Offset printing units 1 Flexo Varnishing unit 1 Hotfoil stamping unit 8 x UV Chiller Splicing Table Web Guide Semi Rotary die cutting unit with Gapmaster Unwind Unit Technotrans Ink Temp Distribution Unit Slitting Unit Waste Matrix Rewind Product rewinder

The Selwood D75 centrifugal pump can pump up to 60 m³/h with high efficiency., The mobile pump set is equipped with a water-tolerant Selprime® vacuum pump and a Hatz diesel engine., The pump is built into a soundproof enclosure and is easy to operate and maintain., , With its light weight, it is highly versatile and stands its ground, in construction and infrastructure as an all-rounder., , Throughput capacity: 60 m3/h, Max dirt passage: 30 mm, Motor brand: HATZ 1D41z, Max. head: 24 MWK, Max dirt passage: 1500 rpm, Weight: 530 kg, , = More information =, , Year of manufacture: 2010, Empty weight: 530 kg, Connector size: 4 inch, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an  ...

Selwood PD75, Self-priming - Quick coupling. MAX capacity: 30m³/h. MAX head: 30mwk. MAX sludge clearance: 6mm. Widely used in construction for smaller jobs. Can also be connected to a drain. A well-functioning, immediately usable machine., , Throughput capacity: 30 m3/h, Max dirt passage: 6 mm, Max. head: 15 MWK, Max dirt passage: 3000 rpm, Weight: 115 kg, , = More information =, , Year of manufacture: 2012, Applicable material: Water, Empty weight: 490 kg, Connector size: 4, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, ...

Sevenchefs DC-203 dicer dicing machine. Blade assembly included with spare parts included. This item was purchased brand new and only used for 2 months. This is in impeccable like new condition.

Bosch (Eisai) AIM 596 inspection machine suitable for ampoules/vials with a diameter of up to 30.0 mm and a height of up to 130 mm, capacity up to 16,000 ampoules/vials per hour, machine net weight approx. 2700 kg with Seidenader DAR 350RL external washing and drying machine for ampoules/vials, etc., capacity up to up to 21,000 ampoules/vials per hour., machine net weight approx. 700 kg, includes format parts for ampoules 1 + 2 ml. (Ø10.75 mm), 3 ml. (Ø12.75 mm), 5 ml. (Ø14.75) and 10 ml. (Ø17.75 mm) and vials 20 ml

turning diameter: 490 mm turning length: 2000 mm control: Heidenhain MANUALplus 4110 swing diameter over slide rest: 280 mm spindle turning speed range: 1 - 3000 U/min spindle bore: 93 mm rapid power traverse in X-and Z direction: 7 / 10 m/min power capacity: (100/60 % ED) 15/20 kW tailstock quill diameter: 70 mm tailstock quill stroke: 160 mm tailstock quill taper MT: 5 max. workpiece weight between centres: 1000 kg max. workpiece weight -without tailstock: 500 kg weight of the machine ca.: 3,6 t dimensions of the machine ca.: m Features: Control Heidenhain MANUALplus 4110 2 steady rests Manual chuck with jaws Tool holder with inserts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 252800 € : 600 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3100 mm : 410 mm : 700 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 280 l : 5750 mm : 2500 mm : 4000 mm : 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transp ...

: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : DIN 69871 SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.