se shredder used for sale

Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Quantity: 1 piece available -Weight: 26 kg

Manufacturer: Seydelmann Type: Grinders Mixer 2-speed working worm 1-speed mixing paddle motor, 1.5 kW with 2 mixing arms, independent of working worm Height: 1450 mm Width: 900 mm Length: 1250 mm Voltage: 400V 50Hz 3N Power: 20.0 kW 37 A Throat Diameter: 130 mm Main material: Stainlees Steel Machine weight: 680 kg

Capacity: approx. 8,000 - 10,000 ltr./h including Siemens S5 PLC Top condition

Gear motor, electric motor -Speed: 113 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: -Weight: 16 kg

Gear motor, electric motor -Gearbox manufacturer: SEW -Engine manufacturer: SEW -Speed: 20/40 rpm -Power: 0.55/0.66 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: -Price: per piece -Number: 7x available -Dimensions: -Weight: 53 kg

Gear motor, electric motor, three-phase motor -Speed: 84/128 rpm -Power: 0.48/0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Weight: 25 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: SEW -Gearbox manufacturer: SEW -Motor power: 0.37 kW -Speed: 46 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: -Brake: 220 V -Dimensions: 550/180/H220 mm -Weight: 31 kg

Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: 445/230/H200 mm -Weight: 23 kg

Inv. Num. : 7790 Type: SL-4T Producer: MORI SEIKI Created: 1984 Parameters: Control system: FANUC 6T Maximum turning diameter over bed: 490 mm Maximum turning diameter over support: 320 mm Maximum spindle speed: 3000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 5500 kg Equipment: Conveyor

gear motor, electric motor -Speed: 4 rpm -Power: 0.25 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 55 -Number: 1x engine available -Dimensions: -Weight: 73 kg

Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 31 kg

Gear motor, electric motor -Speed: 67 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 55 -Brake -Number: 1x engine available -Price: per piece -Weight: 14.9 kg

Dough dividing and rounding machine Roll Press Record Semi-automatic 36-piece Parting head NEWLY revised Stainless Steel Knife NEW Dough insert up to 2100g, pieces from 20 to 70 g Output approx. 3600 pieces/hour with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm, WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Cast Plate Stainless steel platform Maintenance contract Service Package E-Box Many more TOP dough dividers in stock!

Mori Seiki NL 2500 SY / 700 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX-850 III Main spindle nose: ASA 8 Main spindle power: 18.5Kw Main spindle bar pass: 80mm Turning diameter: 360mm Turning length: 705mm Main spindle speed: 4000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm First turret Z-axis travel: 795mm Fast feeds for linear axes X Y Z: 30m/min Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 6000 Counter spindle power: 11Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Presetting: yes Machine equipment: Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIGHT::: Length: 4420mm Width: 2 ...

Mori Seiki NL 2000 SY 500 MOTORIZED LATHE :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX 850 Main spindle nose: ASA 6 Main spindle power: 15Kw Main spindle bar passage: 65mm Turning diameter: 275mm Turning length: 510mm Number of main spindle speeds: 5000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm Z-axis travel first turret: 590mm Fast feeds linear axes X Y Z: X 30 / Y 10 / Z 30m/min Sub-spindle: yes Spindle nose: ASA 5 Number of counter-spindle speeds: 6000 Counter spindle power: 7.5Kw Bar Passage: 43mm Z stroke sub-spindle : 625mm Model and brand bar loader: Iemca Master 880 MP-E Chip conveyor: belt Presetting: yes Machine equipment: Extensive machi ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 27/117 rpm -Power: 0.12/0.48 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Weight: 19.5 kg

Gear motor, electric motor -Speed: 32 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 30 kg

Card packaging system CR80/ISO7810) formats (e.g. telephone cards). The plant can wrap the cards individually in foil and also form a chain with 50 cards. In the end, the cards are automatically packed as a block. A camera is used to record a code for quantities and product control. Details: High-speed packaging machine for CR80/ISO7810) formats • Output up to 700 products/minute • 4-sided ultrasonic weld seam • High-speed feeder with servo motors for reliable separation • Chains of 5, 10, 15, 20, 25 to 50 as well as single cards. • 2 feeder feeders for card and insert • 2 camera systems from Quali Vision, for checking the sequence and in the outer packaging for labeling • Windows 2000Professional as a production system • Paternoster for destacking in the zig-zag process • Cross transport on outer packaging machine • Marden Edwards Series 4 LX12 ...

Digital Programs TSC, Colour Display, Chromed Air Table, Chromed Side Air Tables, Light Bariers, Standard Accessories

Key data: 120 l/min, 12 W, 7

Text

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...

Key data: 400 l/min, 5

Coolant tank 20 m3 consisting of 2 tanks that are joined together. From container 1 there is an overflow into container 2. Installation area approx. 2500 x 4000 mm for both containers. Was used as a container for pure oil for the grinding process, so there was no rust at all. Condition very good!

Automatic Grinder Manufacturer: Seydelmann Model: AV 250 K Completely made of stainless steel Electric power: 81kW Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Control: Siemens 840D total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,4 x 2,4 x 2,8 m Brand DMG Mori Seiki Machine no F666 Type DMC 635 V Ecoline Control Siemens 840D Year of make 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle taper SK40 Speed maximum 12.000 RPM Chip transport Machine size 3.400 x 2.400 x 2.800 mm Machine weight 3.950 kg Tool magazine positions: 30 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 9 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 410/190/H155 mm -Weight: 16 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 165 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 21 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 57 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 44 -Brake: 220 V -Number: 9x motor available -Price: per piece -Weight: 14 kg

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: Siemens 840D total power requirement: 13/9 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,4 x 2,5 x 2,2 m Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-speed labeller for 2.25 ml Ypsomate Autoinjectors. The machine line consists of an automatic pallet management system for the autoinjectors packed on pallets in trays: a) Integrated Full Tray De-Palletizing with a first FANUC robot, which places the trays on a conveyor belt. On the same machine, the empty pallets are palletized with empty trays by a second FANUC robot. b) Machine where via the conveyor belt, trays transported with autoinjectors arrive at the next FANUC robot. This robot will pick up the autoinjectors in the laying position from the trays and put them upright into the feeder to machine c). The emptied trays will be transported back to machine a), where they will be picked up and put onto an empty pallet. c) Fully autom. rotary labelling machine IMA, type Sensitive Roto 720. Machine with two label dispensers for faster reel change (no downtime). Outp ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 20 kg

Available 2 units of 1600kVA dry transformer. One is SEA and the other is a Gritti unit. Both with the same caracteristics, ready to be loaded and on a perfect condition. 21kV to 400V Power: 1600kVA

Variable regulator

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Weight: 18.5 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 21/41 rpm -Power: 0.88/1.3 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 660/230/H300 mm -Weight: 59 kg

Unloader Schneider Senator RS SR0059, year 2000, machine number M-0510-008-04/10-00, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machines in our house by prior appointment.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 35 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 19 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 12 rpm -Power: 0.25 kW -Hollow shaft diameter: Ø 25 mm -Design: Hollow shaft angle -Protection class: IP 44 -Brake -Dimensions: 450/195/H190 mm -Weight: 23.2 kg

swing diameter: 370 - 800 mm weight of the machine ca.: 650 kg dimensions of the machine ca.: 20,41,3 m Open steady rest / setting block - fixed with 4 quills Bed width approx. 360 mm Total base width approx. 720 mm Centre height approx. 500 mm Space requirement approx. 1950 x 400 x 1300 mm Weight approx. 650 kg Working range: approx. Ø 370 - 800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 30 mm

Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 11/21 rpm -Power: 0.2/0.28 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Brake -Dimensions: 450/200/H220 mm -Weight: 24 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 550/290/H276 mm -Weight: 17 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 0.8/1.6 rpm -Power: 0.12/0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 45 mm -Protection class: IP 55 -Dimensions: 670/300/H320 mm -Weight: 69 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 161 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 35 mm -Protection class: IP 55 -Number: 3x engines available -Price: per piece -Dimensions: 520/270/H300 mm -Weight: 45 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 15.5/31 rpm -Power: 0.37/0.55 kW -Construction: B5 angle -Diameter shaft: 30 mm -Protection class: IP 44 -Dimensions: 510/257/H290 mm -Weight: 47 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 28 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: Ø 45 mm -Protection class: IP 54 -Brake -Dimensions: 605/345/H330 mm -Weight: 65 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 27 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 44 -Number: 4x engines available -Price: per piece -Dimensions: 350/190/H185 mm -Weight: 13.2 kg/piece

Height 2200 mm Width 1900 mm Length 2200 mm Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant Loading Loading integrated into the machine Throat diameter 160 mm Wolf type: Simple wolf Auger Stuffing Feeding System Hopper Throat Design: Stainless Steel Material of the feeding screw Stainless steel, acid-resistant

Bread maker for baguette bread Manufacturer: Seewer Rondo