se shredder used for sale

200 ton x 4000mm with Rolleri Pneumatic clamps

PLC, control panel, operator panel, control machine -The front of the control panel comes from: a Hitachi Seiki type HC400 machining center -Manufacturer: Hitachi Seiki -Control: FANUC -Dimensions: 400/310/H100 mm -Weight: 3.8 kg

Control amplifier, servo motor control -Case: without control cards -Quantity: 2x cases available -Price: per piece -Dimensions: 700/500/H320 mm -Weight: 40 kg/piece

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 5.5 kW -Speed range: 15 to 90 rpm -electrically adjustable -Drive shaft: Ø 40 mm -Design: B3 -Protection rating: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.

Monitoring module, safety module, controller, safety relay, relay -Manufacturer:Telemecanique, safety relay -Type: XPS-AL/SerieB -XPSAL5110 -Snap fastening on: 35 mm standard rail -Price per piece -Number: 6x available -Weight: 0.2 kg

Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 10 mm -Construction: B5 -Protection class: IP 54 -Number: 2x available -Price: per piece -Dimensions: 240/160/H200 mm -Weight: 6.5 kg

Key data: 550 mm, 1500 mm

Rolling mill 60" See attachment for details!

collets: 3 - 20mm tool taper: Sk 430 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set 21 pieces Collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. Recording SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make : MULTIVAC Model : TS 250 Y.o.m : 2009 Condition : Good

Electric motor, three-phase motor -Power: 0.25 kW -Speed: 2755 rpm -Shaft: Ø 11 x 20 mm -Construction: B14 -Flange: Ø 90 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 230/118/H165 mm -Weight: 5 kg

Electric motor, three-phase motor -Electric motor: for gear motor -Type gear motor: FA60MT80N80N1/HF -Speed: 750 rpm -Shaft: Ø 12x20 mm -Design: B5 -Protection class: IP 55 -Dimensions: 355/213/H160mm -Weight: 15kg

used parts and components available from stock for Sabo 1203; 1500 (also new parts!); 1502D; RS84 Senior Ransomes 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbitels, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., , Shibaura SP1840; CM364, Toro Pro81 etc. ... complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO, self-propelled Ransomes MK IV... Info and offers on request. No sending of package deals or lists.

Base Machine is a OMSO DM44N 2-Lane Lid Machine, age 2004, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumulator as well Auto feeding of Lid Stacks to the 2 x Universal Screw Denesters with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Pressure Sensitive Label dispensers, with PLC Controls, manufactured by PAGOmat/ Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Max. dia. of round Lids: Ø125 mm Max. dimensions of Rectangular & Oval Lids: 125 x 150 mm Max. height of Lids: 25 mm Speed with Oval Lids dimensions 120 x 130 mm: Single Lane 110 Lids/ min, Dual Lane 220 Lids/ min 400 V, 3 phase, 50 Hz

semi-hermetic screw condensing units MODEL:BBLGS2-8OMY-FB(R134A) SERIAL NUMBER:BLG1509005 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:216.4kW POWER:49kW REFRIGERANT/OIL:R134A/BSE170 SIZE:28501374.6`1321.4 ATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO., LTD.

for powdering in truffle production Dimensions 620 x 1000 x 1050 mm Capacity 25 kg - 35 kg depending on the product Electricity 220 V, single phase, 16A

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft: Ø 12 mm -Construction: B5 -Flange: Ø 120 -Protection class: IP 54 -Dimensions: 290/192/H146 mm -Weight: 10 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 14 mm -Design: B5 -Protection class: IP 44 -Dimensions: 295/205/H160 mm -Weight: 11 kg

semi-hermetic screw condensing units MODEL:BBLGS2-100MY-FB(R134A) SERIAL NUMBER:BLG1509006 VOLTAGE:415V/3Ph/50Hz COOLING CAPACITY:248.4kW POWER:56kW REFRIGERANT/OIL:R134A/BSE170 SIZE:31501374.6' 1432.9 DATE:2015/09 CE SUPREME ELECTRIC & REFRIGERATION CO. LTD.

three-phase motor, electric motor -Power: 0.22/0.4 kW -Speed: 670/1400 rpm -Shaft: Ø 12 mm -Design: B5 -Protection class: IP 54 -Quantity: 1 piece available -Dimensions: 290/250/H255 mm -Weight: 15 kg

Gear motor, electric motor -Speed: 38/76 rpm -Power: 0.059/0.1 kW at 60 Hz -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: -Price: per piece -Number: 1x available -Dimensions: 445/210/H180 mm -Weight: 24 kg

Gear motor, electric motor, electric gear motor -Speed: 32.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 33 -Dimensions: 440/210/H180 mm -Weight: 20.7 kg

Key data: 915 , 1144 , 380

Cummins KTA 50 G1 Diesel Generator Set Open Type. Kw:915 Kva:1144 V:380 Hz:50 Working Hours:777 Drop from factory used by emergency generator. Very good condition. For more information, pls send us an email.

Gear motor, angular gear motor, electric motor, electric gear motor -Motor power: 0.37 kW -Speed: 106 rpm -Shaft diameter: 30 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/210/H200 mm -Weight: 23 kg

Gear motor, electric motor, three-phase motor -Speed: 90 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Dimensions: 305/195/H150 mm -Weight: 10.8 kg

From operating resolution: Selco Genesis 352 GSM DC Device No.007410000118 with water cooling Welding range 6-350 amps 350Amps at 60%ED 270Amps at 100% ED 380 volts with 8meter burner AQ 18F with flexible head and ground cable Adjustable pulse function RF Ignition 2/4 stroke

Key data: 1020 mm, 510 mm, 460 mm

Machine Details Stock-No. 1105-04002 Type of machine Machining Center - Vertical Make MORI SEIKI Type MV 50 Year of manufacture 2001 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery immidiately Freight basis ex site Technical details x-travel 1020 mm y-travel 510 mm Z-Travel 460 mm control MSG 500 table-size 1350 X 550 mm max. table load 800 kg turning speed range - milling 8000 rpm tool taper BT 40 Tool changer 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 12 kg power capacity - milling spindle 7,5 / 11 kW rapid traverse X-axis 32 m/min rapid traverse Y-axis 32 m/min rapid traverse Z-axis 24 m/min Feed 0.001 ~ 10.000 mm/min spindle bearing diameter 100 mm total power requirement 35 kW weight of the machine approx. 5.7 t dimensions of the machine appr ...

John Deere 1505 Series II implement carrier, 4 cyl. diesel engine 31 kw/42hp all-wheel drive, continuously variable hydrostatic drive, differential lock, adjustable steering column, cab with air conditioning (function not tested), comfort driver's seat air suspension, data confirmation DEKRA for ABE available. Equipment: None Optionally available: Schell front sickle mower FSM 3000H (rear discharge) Working width 300 cm (middle 180 cm + sides 60 cm each) Side mowers can be moved up / down by approx. 12 cm, automatic switching on and off of the side mowers when lowered/raised. Height adjustment from approx. 25mm to 110mm Sliding plate under the blade as collision protection 4 support rollers in the mower housings and front in the middle as anti-scalping rollers Extras: 3 casters Identical machine with front mower Fastback Commercial 118 (3 m) for sale as well as other mowing ...

Cutter Seydelmann K 60 U, Machine completely made of stainless steel, 2 speeds, mixing gears, cutter head wrenches, external control box and display, built in 1996, Dimensions LxWxH approx. 160x110x120cm, weight approx. 888kg, good used condition, fully functional, runs smoothly

Key data: 1050 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-04003 Type of machine Machining Center - Vertical Make BARON MAX Type KAWA SEIKI VMC 32 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis EX WORK Technical details x-travel 810 mm y-travel 510 mm Z-Travel 510 mm table surface area 1050 X 550 mm turning speed range - milling 60 - 8000 rpm control FANUC OM power capacity - milling spindle 7.5 kW tool taper BT 40 No. of tools in magazin 20 stations feed range 1 - 10000 mm/min Rapid traverse: 30 m/min total power requirement 25 kW Weight of the machine approx. 500 kg dimensions of the machine approx. 2300x2200x2600 mm Additional information nice machine WITH FANuc OM

Gear motor, electric motor -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 525/200/H160 mm -Weight: 20.7 kg

geared motor, electric motor -Speed: 70 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 25 mm -Wave height: 80 mm -Protection class: IP 44 -Dimensions: 445/205/H160 mm -Weight: 18.1 kg

Ich habe eine gebrauchte - halbautomatische Donutform zu verkaufen. Preis 1950 Euro leicht verhandelbar.

Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1360 rpm -Shaft diameter: 19 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 290/160/H200 mm -Weight: 9.6 kg

Gear motor, electric motor, electric gear motor -Speed: 108 rpm -Power: 0.25 kW -Diameter shaft: Ø 16 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 3x available -Dimensions: 305/195/H155 mm -Weight: 10.7 kg

Gear motor, electric motor -Speed: 290 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 330/200/H180 mm -Weight: 8.5 kg

SEW Movitrac Frequenzumrichter 31C011-503-4-00 RA1284 Hersteller: SEW Eurodrive Typ: Movitrac 31C011-503-4-00 Zustand: gebraucht/ geprüft/ voll funktionsfähig Version: 011-503-4-00 Preis: zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features:

Gear motor, electric motor -Speed: 126 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 300/190/H150 mm -Weight: 9.7 kg

Gear motor, electric motor -Speed: 107 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 305/190/H150 mm -Weight: 9.9 kg

Gear motor, electric motor -Speed: 104 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 17 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 315/195/H150 mm -Weight: 10.4 kg

HOVAP AP-Z-2550 Self-priming centrifugal pumps YOM: 2002 5.5 KW 2925 rpm 30m3/h Two pumps available Excellent working condition

Geared motor, electric motor, electric geared motor -Speed: 25.5/51 rpm -Power: 0.073/0.13 kW -Design: B3 -Shaft diameter: 30 mm Protection rating: Quantity: 1 piece available -Dimensions: 470/210/H190 mm -Weight: 27 kg

Gear motor, electric motor, electric gear motor -Speed: 41 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 430/210/H185 mm -Weight: 21 kg

Gear motor, electric motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 405/195/H165 mm -Weight: 14.8 kg

Gear motor, electric motor, three-phase motor -Speeds: 132 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 44 -Price: per piece -Number: 4x available -Dimensions: 300/185/H145 mm -Weight: 11.8 kg

Gear motor, electric motor -Speed: 128 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 370/200/H155 mm -Weight: 14.6 kg

Gear motor, electric motor, three-phase motor -Speed: 90 rpm -Power: 0.25 kW -Construction: B3 -Diameter hollow shaft: Ø 16 mm -Protection class: IP 55 -Dimensions: 315/195/H145 mm -Weight: 11.6 kg

geared motor, electric motor -Speed: 222 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Dimensions: 315/195/H140 mm -Weight: 11.5 kg

Key data: 18 KW, 13 1/min

Infinitely adjustable variator motor with belt variator