se shredder used for sale

REF-2260 SOMME FORTUNA-363 AUTOMATIC CAN SEAMER WITH 6 HEADS, CLINCHER AND 18-VALVE SOMME VACUUM FILLING SYSTEM Automatic can seaming machine with 6 seaming heads and clincher. Manufacturer: SOMME. Model: Fortuna-363 Fitted with a SOMME 18-valve vacuum filling unit. Can size: Ø 73mm. Output: 18,000 Cans/ hour Overall dimensions: length 5,500mm, width 1,800mm, height 2,300mm

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm

2 knife speeds 2 mixing speeds 2 separate bowl speeds emptier With loader Auto command 3000 K yoc 2017 only 1.603 running hours 125 kW total connected power

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes

technical details: - suitable for heavy starting machines - 18 l large tank = long running time - electronic voltage regulation (AVR) - Thermo-magnetic circuit breaker against overload and short circuit due to defective loads and cables - Insulation monitoring = safe personal protection - Oil deficiency shutdown - E-Start = high comfort Metrics: - Length: approx. 842 mm - Width/depth: approx. 523 mm - Height: approx. 557 mm - Weight: approx. 96 kg Drive: - Engine: Honda GX 390 - Power factor: 0.9 cos ɸ - Starter: E-Start / Hand Start - Type of fuel: Gasoline - Tank capacity: 18 l - Consumption at 75% load: 2.2 l/h - Sound pressure level Lp: 72dB(A) - Sound power level Lw: 97 dB(A) Generator: - Type: Synchronous - Rated voltage: 230 V - Apparent power at LTP: 7.2 kVA - Active power at LTP: 6.4 kW - Apparent power at COP: 6.0 kVA - Active power at COP: 5. ...

Mori Seiki ZT 1500YB in operation, can be viewed during operation. 2002 yes Mori CL 2000 can be viewed under power. Currently not in operation 2004 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2001 yes Mori Seiki SL-204 can be viewed under power. Currently not in operation 2003 yes Tsugami NP-32 can be viewed under power. Currently not in operation 1992 yes Riello in operation, can be viewed during operation. 2002 yes Muratec MW 120 GT 2012

Hamilton FLOW PCR Setup Instrument The Hamilton FLOW PCR Setup Instrument is a benchtop robotic workstation for fully automated preparation of PCR and qPCR reaction approaches, designed to minimize manual pipetting errors and increase sample throughput. It is typically used in conjunction with Roche Life Science products (such as the MagNA Pure 96 System and LightCycler® 480 Instrument) as part of the FLOW solution. Features and Specifications The Hamilton FLOW PCR Setup Instrument (PSU) is characterized by its precision and ability to integrate into automated workflows. Automation: It automates the pipetting and distribution of PCR components (samples, master mixes, primers) in 96- or 384-well PCR plates. Volume range: The hardware is designed for aspiration and delivery of volumes up to 1 ml. Traceability: It has automatic tracking of barcodes on accessories and con ...

Vacuum filler, make SEN, with 28 filling valves, with 5-head screw capper for MCA 28 caps.

Available in stock 1 x NEVER USED Capstone IGBT. Most commonly used for Microturbines C60. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Vacuum filler, make SEN, type: Compacta FWF 30/6, for about 5.000 bph, with 30 filling valves and 6-head nature corker, adjust to 0,7 lt / 0,75 lt "Bocksbeutel"- and 1,0 lt wine bottle, built 1985

Automatic Angle Grinder 130 mm Completely made of special stainless steel Speeds: 2 of the working worm and 2 of the feeding worm Holeplate diameter: 130 mm 400 V, 3 Ph, 50 Hz Hopper capacity approx. 130 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 110,0 (120,0) Height: 135,0 (185,0) Installed power: 18,0 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

Offer MRN3 14D for sale.

Offer Win Server for sale.

Mixer-grinder 200 mm 200 mm hole plate diameter Almost completely made of solid stainless steel 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, with automatic drive Hopper capacity approx. 300 litres (mixing capacity approx. 150 kg) Integrated lifting device, for standard meat bins Machine dimensions in cm: Width: 265,0 Depth: 175,0 Height: 190,0 Power of the motor: 37,0 kW Installed power: 40,0 kW Voltage: 380 V, 50 Hz Machine weight: approx. 1200 kg

Mixer-grinder 130 mm Type: Seydelmann ME 130 Completely made of special stainless steel Hole plate diameter: 130 mm Hopper capacity: about 170 l Throughput depending on material type, speed, cutting set up to 3000 kg/h One-speed mixing mechanism 2-speed working worm Machine dimensions in cm: Width: 90,0 Depth: 120,0 Height: 136,0 Installed power: 18 kW Voltage: 380 V, 50 Hz Machine weight: 680 kg

Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900

Mixer-grinder 130 mm Type: Seydelmann ME 130 Hole plate diameter: 130 mm 2-speed working worm 1-speed mixing paddle motor, approx. 1,5 kW with 2 mixing arms, independent of working worm, Hopper capacity approx. 170 litres (mixing capacity approx. 100 kg) Machine width: 90,0 cm Machine depth: 117,0 cm Machine height: 140,0 cm Power of motor: 18,0 kW Voltage: 400 V, 50 Hz Machine weight: 680 kg

Machine Details Stock number 1105-03758 Machine type CNC lathe - inclined bed machine Brand MORI SEIKI Model SL 250 BMC Year of construction 1999 Control type CNC Control FANUC MSC 503 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base EXW (Incoterms 2000) free Technical details Turning diameter 356 mm Turning length 500 mm Control FANUC MSC 503 Turning diameter over bed 520 mm Turning diameter above the paddling carriage 275 mm Center width 525 mm Travel - x 260 mm Travel - z 550 mm Spindle speeds 42 - 4000 rpm Spindle bore 85 mm Turret head (x-fold) 12-fold Shank cross-section 25 Shank diameter 50 mm Rapid traverse longitudinal 15000 mm/min Rapid traverse plan 12000 m/min tailstock stroke 491 mm Motor power 15 / 11 kW Total power requirement 30 kW Machine weight ca. 5.5 t Information VERY well maintained machine wit ...

It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.

Machine Details Stock number 1105-03760 Machine type machining center - vertical Brand MORI SEIKI Type MV 40 Year of construction 1999 Control type CNC Control msc 501 (FANUC 16M) Storage location FRANCE Country of origin Japan Delivery time immediately Freight Base EX WORK Price Technical details x-travel 560 mm y-travel 410 mm z-travel 460 mm Control msc 501 (FANUC 16M) Rapid traverse x/y/z 20/20/15 m/min Table surface 900 x 450 mm Tool magazine: 30 BT 40 tool diameter 80 mm tool length 250 mm tool weight 8 kg Spindle speed 8000 1/min Spindle motor 7.5 kW Total power requirement 30 kW Machine weight ca. 5 t Space requirement approx. 2.48 x 2.25 x 2.8 m Information The machine IS IN GOOD CONDITION CONTROL MSG 501

Selectomat System Schlatter RMB EMBA 18

Machine Details Stock number 1105-03771 Machine type CNC lathe Brand MORI SEIKI Type SL 25 B/500 Year of construction 1992 Control type CNC Control mori Fanuc MF T6 T6 fanuc mori Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 260 mm Turning length 625 mm Control mori Fanuc MF T6 T6 fanuc mori Circumferential diameter over bed 520 mm Orbital diameter via slide 350 mm Turning length 530 mm Travel - x 160 mm Travel - z 590 mm Speed 35-3500 rpm Spindle nose A2-6 Spindle bore 80 mm Bearing diameter 130 mm Turret head 10 pos. VDI Tool change time 0.7 sec Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Quill diameter 110 mm Quill stroke 100 mm Tailstock displacement 491 mm Drive power - spindle motor 15/11 kW Total power requirement 40 kW Machine weight ca. 5 t  ...

Filling/Seaming machine for carbonated drinks. Filler has 32 filling heads and seaming machine has 6 heads. Seaming machine FERRUM includes lids feeder "ROTOFEEDER" Speed of the machine is 15000 CPH/500 ml. Lids 202 Machine will be reconditioned in 2023

The new Serrmac TCS TR series milling drill has a sturdy structure that allows heavy machining and a prismatic section column. Standard configurations: Diaphragm control panel with digital display to display the number of spindle revolutions (only on VS – VR – E); Tapping with adjustment of the working depth (only on version E with Inverter); Automatic mechanical spindle descent (0.05 – 0.1 – 0.2); Refrigeration tool system; LED lighting system 24V. FEATURES IN PHOTOGRAPHY! Each Serrmac drill can be supplied customized according to every need! Contact us for more information and / or for a custom quote.

Seewer Rondo Doge Sheeter Type: SSO 62 Fully automatic sheeting machine Year of construction 2003 digital control Band width: 58cm Tapes as good as new on wheels with locks Height: 120cm Width: 280cm Depth: 120cm

Seewer Rondo Doge Sheeter Type: SSO 62 Fully automatic sheeting machine Year of construction 1999 digital control Band width: 58cm Tapes as good as new on wheels with locks Height: 120cm Width: 330cm Depth: 120cm

Seewer Rondo SKO 67 Combi Sheeter Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation - mobile on wheels - Machine is functional More information and pictures on request

Tray Sealer A 350 in use until shutdown 2

Size: 0x0

10lt vacuum turboemulsifier. Used to mix emulsions with a liquid or creamy consistency for the skincare, make-up, supplements and healthcare markets, in the pharmaceutical, nutraceutical and cosmetic sectors. Equipped with: - sunroof by electric lifting - tipping tank equipped with jacket for cooling and heating by means of heating elements - AISI Stainless Steel 304 material - Parts in contact with the product in AISI 316 - turbine with adjustable speed via inverter placed on the bottom of the tank - adjustable speed mixer - liquid ring vacuum pump

Machine Details Stock number 1105-03807 Machine type CNC turning and milling center Brand Mori Seiki Type NL 2000 SY Year of construction 2005 Control type CNC Control MSX 850 Mapps 3 Storage location FRANCE Country of origin Japan Delivery time immediately Freight Base EX WORK Technical details turning diameter 356 mm Turning length 510 mm Control MSX 850 Mapps 3 Swing diameter 755 mm Standard turning diameter 275 Rod diameter 65 mm Travel - x 260 mm Travel - z 590 mm Spindle drive 15 kW Spindle speed 5000 1/min Turret stations / powered 12/12 Rapid traverse - longitudinal/flat 30 m/min Total power requirement 32 kW Machine weight ca. 5,8 t Space requirement approx. 2320 x 1783 x 1819 mm Accessories Conveyor High-pressure cooling 5 bar Workpiece counter Total counter Double foot switch Information High performance CNC lathe SUP SPINDLE + C AXIS + ...

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

8 pieces, Polyethylene semi-tubular film, residual stock, Width 550 mm Thickness: 30 microns Barrel length per roll:700 meters needled suitable for shrinking No guarantee is assumed for the technical data given in the description.

Those dough dividers and rounders allow you to make 30 identical products in 1 work cycle. The products can be cut into pieces or rounded - depending on your needs! Weight ranges: Fortuna 3: 32-80 g Fortuna 4: 40-110 g Both machines are available both in semi- and in full automat. If you have any questions, don't hesitate to contact me via phone, mail or whatsapp!

Combi sheeter Seewer Rondo SKO68 Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation -left strap extendable -Hinged straps - mobile on wheels - Machine is functionally tested and cleaned

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

Seydelmann K 204 DC 8 with ejector and feed, stainless steel bowl, tested function

Sheeter Seewer Rondo SSO 62 - with digital control - mobile on wheels with lock - with fold-up straps - Band width: 62cm