sd 63 used for sale

Lathe Saeilo TUR 630 MN 3000

Swing diameter over bed/cross slide/offset: 630mm/340mm/700mm, center height: 290mm, distance between centers: 1500mm, speed: 1120rpm, machine dimensions X/Y/Z: approx. 3600mm/1500mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

Key data: 630 t, 275 mm

For sale is a used lowering press, manufacturer Sack + Kiesselbach, type EP 630. The machine is in very good condition. The press worked in an engraving company as a test press. Technical data: Pressing force: max. 630 tons. Installation height: max. 325 mm Stroke: max. 275 mm Weight: 4,000 kg

Subject to prior sale - errors possible! Internal reference number: D-1143-7

Elb 6375 ND Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table : 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Weight: 3300 kg ACCESSORIES: Diamant tools Cooling system: yes

Broaching machine Karl Klink Technical data can be found in the photo

Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

pressure: 630 t diameter: 320 mm stroke: 310 mm total power requirement: kW weight of the machine ca.: 3500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a Stamford CGI 634 H2 generator with serial number A04J299033. This model was originally paired with a Jenbacher 312 engine with the design number B918. The generator has an output of 910 kVA with an output voltage of 400/231 V. The year of construction is 2004, the operating hours so far are 147,000. A Megger test was performed. The price of this generator is 5,000 euros. For more information or to arrange a viewing, please contact us.

General SKU356S852 LocationBarneveld MakeIndustrie Tycon Spa TypeST02-6300 No.6011 Year of construction1996 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume7677 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass Notified bodyTÜV Capacity6300 Ltr. (7677 Ltr) Vessel sizesdia. 1800 x1950 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN80, DN50 OutletDN80 Max. temperature-10/160 °C Information Mounted on legscheck Floorspace1,8x1,8 m Total height2,3 mPressure vesselsTycon ItalyTanks > Pressure vesselsBrand > Tycon Italy What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU441W1454 LocationBarneveld MakeAndritz Separation GmbH TypeSE 630/60 CRD No.400465015 Year of construction2021 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface35.6 m2 Specified Features - Filterpress Filter presscheck Filter surface35,6 m² Number of platens60 Internal platen sizes530x530 mm External platen sizes630x630 mm Platen thickness50 mm Frame thickness12 mm (2x) Cake capacity393l Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Motor1,5kW, 400V, 1445rpm Automatic openingcheck MaterialPolypropylene Information With switchgearcheck Total height2,2 m Weight3560kg CEcheck Floorspace5,5x1,7mFilterpressesAndritz SeparationFilters > FilterpressesBrand > Andritz Separation What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready ...

General SKU441W1453 LocationBarneveld MakeAndritz Separation GmbH TypeSE 630/60 CRD No.400465014 Year of construction2021 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface35.6 m2 Specified Features - Filterpress Filter presscheck Filter surface35.6 m² Recessed chamber platescheck Number of platens60 Internal platen sizes530x530 mm External platen sizes630x630 mm Platen thickness50 mm Frame thickness12 mm (2x) Cake capacity393l Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Motor1,5kW, 400V, 1445rpm Automatic openingcheck MaterialPolypropylene Information With switchgearcheck Total height2,2 m Weight3560kg CEcheck Floorspace5,5x1,7mFilterpressesAndritz SeparationFilters > FilterpressesBrand > Andritz Separation What you can expect from Foeth: -- Machine is in working condition -- At a reduced  ...

Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004) Clamping force: 250 t Tie-bar spacing: 630 × 630 mm Platen size: 900 × 900 mm Mold height (Min / Max): 300 – 700 mm Maximum daylight (open space): 1,300 mm Opening stroke: 600 mm Ejector stroke: 225 mm Ejector force: 86 kN Screw diameter: 55 mm Shot volume: 558 cm³ Injection pressure: ~2,380 bar Number of heating zones: 12 Control system: Selogica Machine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H) Machine weight:  14,000 kg Installed power / electricity: ~68 kW Robot / automation interface: Euromap 2500‑1300 Core pullers: hydraulic

Engine Brand: MITSUBISHI, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 5 , Flywheel SAE: SAE 6 1/2 , Engine Condition: New , Exhaust System: Dry , Starter Voltage: 12 Volt , Rated Power: 7.5 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-mvl3e-63sgm-new /42270, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 90 kg, Type number: MVL3E-63SGM

Lathe Leopoldo Pontiggia PH 630 Center height: 850 mm Maximum turning diameter: 1600 mm Distance between centers: 5000 mm Overall dimension: 9000 mm x 2300 mm x 2200 mm H

Homag modular unit, finishing unit, buffing unit, polishing unit format processing unit, double-end profiler, edge processing machine, -Polishing finishing unit: from Homag edge banding machine -Motor: 0.25 kW -Heights adjustable and rotatable -Number: 2x aggregates available -Speed: 1x 2780 rpm, 1x rpm -Price: per piece -Dimensions: approx. H520/D300/W280mm/H520/D300/W280mm

Mazatrol Matrix Control Travel X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm A-axis: +30°/-120° C-axis: 360° Max. distance from spindle nose to table top edge (table horizontal): 740 mm Min. distance between spindle nose and top of the table (table horizontally): 230 mm Max. distance from spindle nose to table center (vertical): 690 mm Min. distance from spindle nose to table center (vertical): 180 mm Max. table load: 500 kg Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Pallet Changer – Mazak Palletech System 6-fold pallet changer Pallet size: 500 x 500 mm Milling spindle SK-40 Max. spindle speed: 12,000 rpm Drive power milling spindle: 22Kw Tool magazine Number of tool positions: 120 Other equipment • 5-axis simultaneous machining • Synchronized tapping • Rapid traverse constant angle of inclination when moving 3D coordinate conversio ...

New Kelvion / Goedhart VCe-i 635010 Freon evaporator with hot gas defrost built in 2020. Complete with 3 Ziehl-Abegg fans - 50 Hz - 0,72 kW - 1240 RPM - diameter 500 mm and a total airflow of 25.437 m³/h. Specifications: Brand: Goedhart Type: VCe-635010 Capacity: 36,6 kW Refrigerant: Freon Number of fans: 3 Fin space in mm: 10 mm Defrosting: Hot gas Air flow: 25.437 m³/h Sizes: 3560x1000x1010 mm (LxWxH) Year of built: 2020 Volume: 43 dm³ Weight: 340 kg

FOR SALE 2 DRY TRANSFORMER LOADED

Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible.

turning diameter: 270 mm turning length: 630 mm control: SIN840D swing over bed: 400 mm swing diameter over slide rest: 220 mm longitudinal slide -travel: 745 mm cross slide - travel: 200 mm turning speeds: 10 - 4.000 U/min power capacity at 100 % load: 15,00 kW spindle head DIN 55026 - Size: 6 spindle bore: 62 mm chucking diameter: max. 315 mm feed x-axis: 1 - 12.000 mm/min rapid traverse X-axis: 12,00 m/min Feed z- axis: 1 - 20.000 mm / min. rapid traverse Z-axis: 20,00 m/min tailstock quill taper MT: 3 quill stroke: 112 mm quill pressure: 10,00 kN tool turret with 12 work positions: tool taper DIN 69880: Ø 30 mm Tool drive speed max.: 4.000 1/min total power requirement: 37,00 kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool hol ...

Dimensions (L/W/H): 1200x1200x1400 mm Weight: 1100 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1280x2120x2050 mm Weight: 1950 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1280x2120x2050 mm Weight: 1950 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1200x1400 mm Weight: 1100 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 3-300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 0-16 m/min. Dimensions (L/W/H): 1200x1100x1160 mm weight of the machine ca.: 950 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 350 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630mm, table length: 1600mm, max. dough belt thickness: 30mm, machine dimensions X/Y/Z: approx. 2250mm/1200mm/1200mm, weight: approx. 250kg. On-site inspection is possible.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm table surface area: 790 x 560 mm spindle taper: SK 40 spindle turning speed - stepless: 20 - 12.000 U/min spindle drive: 13 kW max. torque on the spindle: 83 Nm feeds x/y/z -stepless: bis 20.000 mm/min rapid traverse: 30 m/min ATC: 20 Pos. tool diameter if 2 vacant positions: 130 mm tool diametre at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6 kg internal coolant system feed: 12 bar control: HEIDENHAIN, TNC 620 total power requirement: 17 kVA weight of the machine ca.: 3,9 t dimensions of machine L x W x H: 3,0 x 1,92 x 2,35 m Accessories: probe HEIDENHAIN, TS 460, electron. hand panel, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Marelli MJH 630 MA4 4 B20 3000kva / 13.800volt 60hz 2800kva / 10.500volt 50hz Year 2022 (new and unused) located in our warehouse in NL: Kranenpool 10 6443VA Brunssum

Pressing force: max. 630 tons. Installation height: 375 mm Stroke: 275 mm Weight: 4,500 kg.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: iTNC 530 Heidenhain Main spindle:: power capacity - main spindel: 13 / 9 kW turning speed range - main spindle: 20 - 10.000 min/-1 Torque: 83 / 57 Nm tool taper: SK 40 tension force: 10 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mm T-slot - distance: 100 mm max. table load: 600 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg Total weight, approx.: max. 60 kg feeds:: feed speeds: max. 20.000 mm/min Feed force: 5 kN input unit: 0,01 mm rapid traverse: 30 m/min total power requirement: 20 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,5 x 4,0 x 2,8 m Documents: Coolantsystem: high pressur ...

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: Siemens ergoline table surface area: 2x 790 x 560 mm number of pallets: 2 rapid traverse: 30 m/min turning speed range: 8000 U/min power capacity - milling spindle: 13 kW no. of tools in the magazine: 30 Stück tool taper: SK 40 | | weight: 5,2 t dimensions: 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 630 mm turning diameter over slide rest: . mm turning length: 3150 mm hollow: mm Number:: 16304188/ turning diameter: mm weight: 4,8 t The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Arburg Allrounder 630S 2500-675 was manufactured in 2003. It is a hydraulic injection moulding machine featuring a screw diameter of 45mm. Consider the opportunity to buy this Arburg Allrounder 630S 2500-675 hydraulic injection moulding machine. Contact us for more information.

This SMTCL HTC 63300 was manufactured in 2007. A robust horizontal turning machine featuring a swing diameter over bed of 810 mm and over saddle of 580 mm. It includes a 500 mm chuck, a spindle speed range of 50 - 1800 rpm, and an auto turret with 12 tool positions. Ideal for handling large workpieces with its 3000 mm distance between centers. Contact us for more information about this machine.

This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information.

This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information.

The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details.

This 3-axis DMG DECKEL MAHO DMC 635V vertical machining centre was manufactured in 2007. It features a tool holder SK 40, a 32-position random tool changer, and a spindle speed of 10,000 RPM. The machine dimensions include a 790 X 560 mm table surface and a load capacity of approximately 600 kg. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine.

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine.

This 5-axis Mazak Variaxis 630-5X T was manufactured in 2009, offering advanced capabilities for complex machining tasks. Ideal for precision engineering, this vertical machining center ensures reliable performance. Consider the opportunity to buy this Mazak Variaxis 630-5X T vertical machining center. Contact us for more information.

This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. Its a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine.

Manufacturer: ELB Model: Optimal 6375 Year of Manufacture: 1990 Magnet 500 x 350 mm Accesories: Coolant tank 5 grinding wheel flanges Various used grinding wheels Balancing scale with mandrel for grinding wheels Find more here - / Contact us at -

This 3-axis DMG DMC 635 V eco was manufactured in 2011. It features a vertical milling spindle with a tool holder SK 40, capable of speeds up to 8,000 min-¹. The machine offers a maximum drive power of 13 kW and a rapid traverse rate of 25 m/min. Ideal for complex machining tasks, consider the opportunity to buy this DMG DMC 635 V eco vertical machining centre. Contact us for more information about this machine.