sd 63 used for sale

FAS conveyor roller curve 90° 635-500 IR850 RA1990 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 635 mm roller width (NUB): 500 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor Engine power: kW 0.15 S1 Hz 50 Funding speed: 0.93 m/sec Drive: Center drive usable width: 500mm The rolls are higher than the frame Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 850 Nominal / outside width in mm: 635 Roll width in mm: 500 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,15 Conveyor speed m / s: 0,93 scope of delivery: without supports and side guides Für eine  ...

Distance between centers: 3000mm, swing over bed/cross slide/in bed gap: 630mm/350mm/880mm, spindle bore: 77mm, speed: 1600rpm, power: 7.5kW, tailstock: MT5, quill stroke: 250mm. Machine dimensions X/Y/Z: approx. 5050mm/1300mm/1450mm, weight: approx. 3500kg. Includes three-jaw chuck, fixed and travelling steadies, as well as a quick-change tool holder. An on-site inspection is possible.

max. wheel diameter: 630 mm gear width: 215 mm max. module: 12 min. module: 1 number of teeth: 5 - 140 stroke length max.: 225 mm table diameter: 500 mm table load: 400 kp grinding wheel diam. min/max.: 270-350 mm max.helical angle: 45 ° no. of strokes: 75 - 315 p.M. total power requirement: 8,5 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: 3,2 x 3,6 x 3,7 m change gears, program control, complete covering, coolant/Filtering attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 8

A used gear pusher Lorenz S8/630 with interchangeable wheels.

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible.

FOR SALE TBG 632V12 engine power 2798 kwe year 2000 hours 47 000 alternator AC GENERATOR year 2012 power 3041 kva RPM 1000 HZ50 400 V full instalation overhaul at 40 000 hours

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg

DMG, Type DMC 635 Ecoline, YOC 2013 Travel: X 635mm Y 510mm Z 460mm Spindle speed 0-10000/min. Controlled axes 3 Spindle holder SK 40. L x W x H 3,500x4,000x2,700mm Machine weight 4500kg

Lathe Saeilo TUR 630 MN 3000

Key data: 630 t, 275 mm

For sale is a used lowering press, manufacturer Sack + Kiesselbach, type EP 630. The machine is in very good condition. The press worked in an engraving company as a test press. Technical data: Pressing force: max. 630 tons. Installation height: max. 325 mm Stroke: max. 275 mm Weight: 4,000 kg

Swing diameter over bed/cross slide/offset: 630mm/340mm/700mm, center height: 290mm, distance between centers: 1500mm, speed: 1120rpm, machine dimensions X/Y/Z: approx. 3600mm/1500mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

Subject to prior sale - errors possible! Internal reference number: D-1143-7

Elb 6375 ND Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table : 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Weight: 3300 kg ACCESSORIES: Diamant tools Cooling system: yes

Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Broaching machine Karl Klink Technical data can be found in the photo

pressure: 630 t diameter: 320 mm stroke: 310 mm total power requirement: kW weight of the machine ca.: 3500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU356S852 LocationBarneveld MakeIndustrie Tycon Spa TypeST02-6300 No.6011 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume7677 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Notified bodyTÜV Capacity6300 Ltr. (7677 Ltr) Vessel sizesdia. 1800 x1950 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN80, DN50 OutletDN80 Max. temperature-10/160 °C MaterialGlass General Year of construction1996 Mounted on legscheck Floorspace1,8x1,8 m Total height2,3 mGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersPressure vesselsCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPITycon ItalyIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndus ...

General SKU441W1454 LocationBarneveld CEcheck MakeAndritz Separation GmbH TypeSE 630/60 CRD Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface35.6 m2 Specified Features - Filterpress Filter presscheck Filter surface35,6 m² Number of platens60 Internal platen sizes530x530 mm External platen sizes630x630 mm Platen thickness50 mm Frame thickness12 mm (2x) Cake capacity393l Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Motor1,5kW, 400V, 1445rpm Automatic openingcheck MaterialPolypropylene General No.400465015 Year of construction2021 With switchgearcheck Floorspace5,5x1,7m Total height2,2 m Weight3560kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchBiotechnologyAgrochemicalsPlastic & polymersFilterpressesCatalysts & fillersFeed additivesDetergent & surf.CosmeticsFood additiv ...

General SKU441W1453 MakeAndritz Separation GmbH LocationBarneveld CEcheck TypeSE 630/60 CRD Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface35.6 m2 Specified Features - Filterpress Filter presscheck Filter surface35.6 m² Recessed chamber platescheck Number of platens60 Internal platen sizes530x530 mm External platen sizes630x630 mm Platen thickness50 mm Frame thickness12 mm (2x) Cake capacity393l Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Motor1,5kW, 400V, 1445rpm Automatic openingcheck MaterialPolypropylene General No.400465014 Year of construction2021 With switchgearcheck Floorspace5,5x1,7m Total height2,2 m Weight3560kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchBiotechnologyAgrochemicalsPlastic & polymersFilterpressesCatalysts & fillersFeed additivesDetergen ...

Engine Brand: MITSUBISHI, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 5 , Flywheel SAE: SAE 6 1/2 , Engine Condition: New , Exhaust System: Dry , Starter Voltage: 12 Volt , Rated Power: 7.5 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mitsubishi-mvl3e-63sgm-new /42270, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 90 kg, Type number: MVL3E-63SGM

FOR SALE 2 DRY TRANSFORMER LOADED

Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

New Kelvion / Goedhart VCe-i 635010 Freon evaporator with hot gas defrost built in 2020. Complete with 3 Ziehl-Abegg fans - 50 Hz - 0,72 kW - 1240 RPM - diameter 500 mm and a total airflow of 25.437 m³/h. Specifications: Brand: Goedhart Type: VCe-635010 Capacity: 36,6 kW Refrigerant: Freon Number of fans: 3 Fin space in mm: 10 mm Defrosting: Hot gas Air flow: 25.437 m³/h Sizes: 3560x1000x1010 mm (LxWxH) Year of built: 2020 Volume: 43 dm³ Weight: 340 kg

turning diameter: 270 mm turning length: 630 mm control: SIN840D swing over bed: 400 mm swing diameter over slide rest: 220 mm longitudinal slide -travel: 745 mm cross slide - travel: 200 mm turning speeds: 10 - 4.000 U/min power capacity at 100 % load: 15,00 kW spindle head DIN 55026 - Size: 6 spindle bore: 62 mm chucking diameter: max. 315 mm feed x-axis: 1 - 12.000 mm/min rapid traverse X-axis: 12,00 m/min Feed z- axis: 1 - 20.000 mm / min. rapid traverse Z-axis: 20,00 m/min tailstock quill taper MT: 3 quill stroke: 112 mm quill pressure: 10,00 kN tool turret with 12 work positions: tool taper DIN 69880: Ø 30 mm Tool drive speed max.: 4.000 1/min total power requirement: 37,00 kW weight of the machine ca.: 4,00 t dimensions of the machine ca.: 4,00 x 2,75 x 2,30 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, C-Axis, tailstock, chip conveyor, various tool hol ...

Dimensions (L/W/H): 1200x1200x1400 mm Weight: 1100 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1737x1167x1650 mm Weight: 1300 kg Total power requirement: 18,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1100x1160 mm Weight: 950 kg Total power requirement: 8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1280x2120x2050 mm Weight: 1950 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1280x2120x2050 mm Weight: 1950 kg Total power requirement: 21 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x1200x1400 mm Weight: 1100 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630 mm Working height: 3-300 mm Motor output: 7,5 kW Number of knives: 4 St. Feed speed: 0-16 m/min. Dimensions (L/W/H): 1200x1100x1160 mm weight of the machine ca.: 950 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 350 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 630mm, table length: 1600mm, max. dough belt thickness: 30mm, machine dimensions X/Y/Z: approx. 2250mm/1200mm/1200mm, weight: approx. 250kg. On-site inspection is possible.

Marelli MJH 630 MA4 4 B20 3000kva / 13.800volt 60hz 2800kva / 10.500volt 50hz Year 2022 (new and unused) located in our warehouse in NL: Kranenpool 10 6443VA Brunssum

Pressing force: max. 630 tons. Installation height: 375 mm Stroke: 275 mm Weight: 4,500 kg.

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: iTNC 530 Heidenhain Main spindle:: power capacity - main spindel: 13 / 9 kW turning speed range - main spindle: 20 - 10.000 min/-1 Torque: 83 / 57 Nm tool taper: SK 40 tension force: 10 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mm T-slot - distance: 100 mm max. table load: 600 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg Total weight, approx.: max. 60 kg feeds:: feed speeds: max. 20.000 mm/min Feed force: 5 kN input unit: 0,01 mm rapid traverse: 30 m/min total power requirement: 20 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,5 x 4,0 x 2,8 m Documents: Coolantsystem: high pressur ...

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

This SMTCL HTC 63300 was manufactured in 2007. A robust horizontal turning machine featuring a swing diameter over bed of 810 mm and over saddle of 580 mm. It includes a 500 mm chuck, a spindle speed range of 50 - 1800 rpm, and an auto turret with 12 tool positions. Ideal for handling large workpieces with its 3000 mm distance between centers. Contact us for more information about this machine.

Manufacturer: ELB Model: Optimal 6375 Year of Manufacture: 1990 Magnet 500 x 350 mm Accesories: Coolant tank 5 grinding wheel flanges Various used grinding wheels Balancing scale with mandrel for grinding wheels Find more here - .ucymachines/ Contact us at - sales@ucymachines

The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details.

This 3-axis DMG MORI DMC 635 V eco was manufactured in 2010. A vertical machining centre featuring a Heidenhain TNC 620 control, a 20-position SK40 tool magazine, and an internal cooling system at 12 bar. Ideal for precision machining with its direct measuring system for X, Y, Z axes. A great opportunity to buy this DMG MORI DMC 635 V eco vertical machining centre. Contact us for further details regarding this vertical machining centre.

Code: 0299 Brand: SCM Model: S 630/E - CE Standard Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000

This 3-axis MOSSNER Rekord SSF 630 Metal Band Saw was manufactured in 2019. It features an 11 kW reinforced motor, dual-speed manual transmission, and a complete roller guide. The saw includes a feed table with 4 T-slots, an emergency stop button, and an LED work light. Its mounted on a steel plate for stability, with spare saw blades included. Consider the opportunity to buy this MOSSNER Rekord SSF 630 Metal Band Saw. Contact us for more information.

This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information.

General SKU411S991 LocationBarneveld Main Features MaterialChromed Motor11 KW Surface6.28 m2 Specified Features - Roll dryer Roll dryercheck Double rollcheck Roll surface6,28 m² Roll sizesdia. 1000x2000 mm Steam heatingcheck With knife dischargecheck Motor11 kW, 500 Volt Roll speed2-8 rpm With jacketcheck MaterialCast iron, Cast Iron Hard Chromium, Rubber With jacketcheck General MakeGeorg Dietzel (D) TypeEA 630 Extra SpecificationsSmall roll: dia. 210x2000 mm, area: 1.3 m², material: 1.1830, rubberizedSpare rollPowdered foodsStarchBiotechnologyFeed additivesCosmeticsFood additivesSugarDairyDyes & pigmentsAPIRoll dryersGeorg DietzelIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustrie ...

This 3-axis QUICK CNC KQ-63E was manufactured in 2025. Its a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information.

Manufacturer: Demag Model: EL-EXIS S 250/630-1450 Year of Manufacture: 2005 Clamping Unit - Clamping force: 2500 kN - Clamping holding force: 2750 kN - Opening stroke max.: 675 mm - Mold installation height min.: 330 mm - Mold installation height max.: 710 mm (830 mm with extended configuration) - Max. distance between mold clamping platens: 1385 mm (1505 mm with extended configuration) - Mold clamping platens (H x V): 950 x 950 mm - Clear tie-bar spacing (H x V): 630 x 630 mm - Mold weight max.: 3300 kg - Max. weight portion on moving mold clamping platen: 2200 kg Hydraulic Ejector - Ejector stroke: 200 mm - - Ejector force: 69 kN - - Ejector retraction force: 31 kN Find more here - .ucymachines/ Contact us at - sales@ucymachines