screw used for sale

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps  

Screw set, straight cutting ring fitting, screw-in fitting PARKER 4MSC4K-316 Screw-in thread: 1/4 Pipe diameter (outside): Ø 6 mm fitting set consists of 10 fittings ! stainless steel, unused ! Dimensions(single screw connection): 40 x 16 x 14 mm Dimensions (packaging): 100 x 85 x 30 mm

Clamping clamp with screw, 18 pieces SIKLA type 2 Support width: 51 / 32 mm slotted hole (top): Ø 13 x 18mm slotted hole (bottom): Ø 18 x 21mm hammer head screw: M12 x 1,75, total length: 67 mm screw head: 13 x 33 mm nut: Height: 10 mm, width across flats: 19 mm washer: diameter: Ø 40 mm, material thickness: 3 mm material: steel, cast iron, galvanized used, tested ! Dimensions (clamping clamp without screw): 67 x 51 x 30 mm Dimensions ( packaging ): 200 x 130 x 120 mm

Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Screw jack, screw jack, clamping device, Atlas screw jack, threaded screw jack, clamping tool, thread washer -Adjustment: via trapezoidal thread -Adjustment range: 100 - 145 mm -Price: for every 2 pieces -Weight: 4.5 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, injection molding machine, injection molding machine -Replacement screw tips: for injection molding machine -Number: 5x tips available -Sketches with the pictures -different sizes -Price: complete -Admission thread: 27 x 3 mm -Weight: 16.3 kg

Screw jack, screw jack, clamping device, Atlas screw jack, threaded screw jack, clamping tool, threaded support, -Adjustment: via trapezoidal thread -Adjustment range: 120 - 175 mm -Price: for every 2 pieces -Weight: 4 kg

Screw jack, screw jacks, clamping devices, Atlas screw jack, threaded screw jack, clamping tool, thread pad, -Adjustment via trapezoidal thread -Adjustment range: 295 - 530 mm -Quantity: 1 piece -Weight: 9kg

Model: Single Screw PS/PP Extrusion Line Year: 2012 Condition: Excellent Availability: Immediately Materials: PS-PP grnulate Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 750mm Output: 350kg/hour Main Extruder: 105mm single screw extruder air cooled 120kW ac motor & inverter Co-Extruder-1: 65mm single screw with 30kW ac motor & inverter Co-Extruder-1: 45mm single screw with 20kW ac motor & inverter Running from 0.18mm to 1.2mm thick PS/PP up to 450kg/hr. Mix of virgin an regranulate Vented 105 mm extruder with liquid ring vacuum pump system. Screen changers with GOODI systems. Feed block with selector plugs. 750mm wide flex lip single manifold sheet die. Max net width of the sheet is 750mm. Manual T- die. Flex bottom lip. Fixed uper lip. 1100mm wide 3 roll polishing stack with horizontal configuration ( 300mm x 450mm x 450mm diameter). Individual inverter ...

Screw jack, screw jacks, clamping devices, Atlas screw jack, threaded screw jack, clamping tool, thread pad, -Adjustment via trapezoidal thread -Adjustment range: 375 - 605 mm -Quantity: 1 piece -Dimensions: 185/185/H375 mm -Weight: 19.3kg

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //

General SKU392U1285 LocationBarneveld MakeK-tron / Burgener TypeK-PH-MV-KT20 / AFS002 No.1102400/M-984900 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter200 mm Specified Features - Metering screw MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Metering screws Metering screwcheck Screw diameter± 25 mm (2x) Pitch± 10 mm Screw length300 mm With hoppercheck Hopper sizesdia. 200x220 mm Inletdia. 200 mm OutletDN40 With motor0,75 kW Screw speedmax. ± 460 rpm: With breaking/mixing shaftcheck (max. ± 21 rpm) Motor0,75 kW Information Year of construction2011 Mounted on framecheck Mounted on legscheck Mounted on wheelscheck CEcheck With switchgearcheck Floorspace1,4x0,8 m Total height2,4 m ATEX compatiblecheck Extra SpecificationsThe filling plant allows for the semi-automatic filling of biologically highly active, hygroscopic,  ...

General SKU321S564 LocationBarneveld MakeSitecon Process Engineering TypeTrogförderschnecke Mach.No.910-080-00 Main Features Motor3 KW Length1150 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter180mm Length1600mm Between inlet and outlet1150mm Shaft diameter90mm Pitch200mm Inletdia. 200mm Outletdia. 200mm Motor3 kW 230/400 Volt Screw speed106 rpm With covers(1x) MaterialStainless steel Information Year of construction2009 Total height0,8 M CEcheck Floorspace2,3x0,7 M Weight350 KgHorizontal screw conveyorsSiteconConveying systems > Horizontal screw conveyorsBrand > Sitecon What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

General SKU204U043 LocationBarneveld MakeAZO TypeDFS 140x1630 NE250 Mach.No.446632 Main Features Motor1.1 KW Length1810 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4404 Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length1810 mm Shaft diameter30 mm Pitch135 mm Inletdia. 300 mm Outletdia. 193 mm Motor1,1 kW Screw speed109 rpm Information Year of construction2007 Mounted on framecheck Total height0,96 m Floorspace2,4x1,4 m Weight300 kgHorizontal screw conveyorsAZOConveying systems > Horizontal screw conveyorsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines ...

General SKU204U048 LocationBarneveld MakeAZO TypeDFS 140x1630 NE250 Mach.No.446632 Main Features Motor1.1 KW Length1810 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4404 (316L) Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length1810 mm Shaft diameter30 mm Pitch135 mm Inletdia. 300 mm Outletdia. 193 mm Motor1,1 kW Screw speed107 rpm Information Year of construction2007 Mounted on framecheck Total height0,96 m Floorspace2,4x1,4 m Weight300 kgHorizontal screw conveyorsAZOConveying systems > Horizontal screw conveyorsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more m ...

General SKU204U033 LocationBarneveld MakeAZO TypeDFS 140x600 Mach.No.446634 Main Features Motor1.1 KW Length800 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length800 mm Shaft diameter35 mm Pitch120 mm Inletdia 300 mm Outletdia 130 mm Motor1,1 kW Screw speed90 rpm (50 Hz): 109 rpm (60 Hz) MaterialStainless steel 1.4404 Information Year of construction2007 Mounted on framecheck Total height0,96 m CEcheck Floorspace1,4 x 1,4 m Weight300 kg Extra Specificationseasy cleanHorizontal screw conveyorsAZOConveying systems > Horizontal screw conveyorsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 160 x 80 mm -Article No.: Hoffmann 860100 160 -Wingspan: approx. 160 mm -Clamping depth: approx. 80 mm -Number: 13x screw clamp available -Price per piece -Dimensions: 235/130/H25 mm -Weight: 0,7 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 200 x 100 mm -Article No.: Hoffmann 860100 200 -Wingspan: approx. 200 mm -Clamping depth: approx. 100 mm -Number: 6x screw clamp available -Price per piece -Dimensions: 290/160/H35mm -Weight: 1.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 4x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

There are five compressors available (1) 2x Screw Compressor Boge SF 100-2, motor power: 75kW, length: 2000mm, width: 1065mm, height: 1950mm, weight: 1.14t, with documentation (2) Screw Compressor Boge S 61-2, max. rotational speed: 3600/min, weight: 1.3t, with documentation (3) Screw Compressor Kaeser BS 61, volume flow: 5.25m³/min, connected load: 37kW (4) Screw Compressor Boge S 40-2, motor power: 30kW, length: 1620mm, width: 960mm, height: 1450mm, weight: 740kg, with documentation.

The WALTER SF 37 KS screw compressor was manufactured in 2014 by the WALTER Kompressortechnik brand. The freestanding screw compressor has direct drive and built-in inverter. The compressor is offered as a set with a 3000 dm3 vertical expansion tank and WDFC 396 refrigeration dryer, with an integrated control panel and a built-in filter 1 and 0.01 u. Technical parameters of the screw compressor: - pressure: 10 bar - capacity: 5.8 m3 / min - power: 37 kW - connection: R 1 1/4 " - volume: 71 db (A) - weight: 715 kg - length: 1575 mm - width: 1030 mm - height: 1750 mm Technical data of the refrigeration dryer: - capacity: 396 m3 / h - capacity: 6.6 m3 / min - connection: 2 " - voltage: 230/1/50 V - refrigerant: R134.a - pressure drop: 120 mbar - working pressure: 16 - built-in 2 micron filters: 1 and 0.01 - dehumidifier weight: 120 kg - length: 750 mm - width: 700  ...

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

WORTHINGTON CREYSSENSAC RLR 20 CE rotary screw compressor was built in Italy in 2022. The easy-to-maintain compressor with innovative technology provides users with high-quality compressed air at low operating costs. The motor, inverter and other machine components are cooled by a separate airflow with a low operating temperature, and the use of direct-drive gearbox ensures high energy efficiency and operational reliability. The ROLLAIR 20 screw compressor has a capacity of 137 m3/h at a maximum operating pressure of 10 bar. The compressor’s internal water separator with automatic drain and DS13 refrigeration dryer immediately remove moisture from the compressed air, guaranteeing long and trouble-free machine operation. A state-of-the-art Airlogic² controller enables operation with different pressure ranges and allows continuous monitoring of key operating parameters. The total wei ...

AIRPOL K7 rotary screw compressor was built in Poland in 2015. The versatile device driven by belt transmission, provides the user with the highest quality compressed air and ensures uninterrupted operation even during heavy loads. All this is ensured by the compressor’s cooperation with a reliable MARK OP 20 (A3) refrigeration dryer, which removes moisture and water vapour from the compressed air to minimise the risk of corrosion. Combined with efficient ventilation and an oil separation system, the compressed air is also characterised by a very low oil concentration and a slightly higher temperature than ambient. AIRPOL screw compressor together with the dryer weighs a total of 395 kg. Technical data of the AIRPOL K7 compressor - working pressure: 10 bar - engine power: 7.5 kW - capacity: 57 m3/h - refrigeration dryer pressure dew point: +3°C - cooling air requirement: 1200  ...

Mikrosan Twin Screw Extruder Screw diameter : 67 mm Parallel screw

Pipe screw conveyor screw used inclined conveyors Changes can be made by our own special machine construction according to your wishes. Pipe diameter approx. 380 mm Pipe length approx. 6000 mm Inlet/outlet-diameter approx. 350 mm Screw and tube made of stainless steel Gearmotor Sew 1.1kW 10 rpm 380 V Total dimensions approx. 8000 x 600 x 1300 mm

Precision ball screw drive, KGT 40mm, Gewindelg 1735mm, Steinmeyer, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw / ball roller spindle with nut - Nominal thread diameter 40mm, pitch 10mm, - total length: 1920mm, 17kg, - ball screw length: 1735mm shaft end 1: 115mm lg - D22 x 40mm lg, thread M30 x 1,5 x 21mm lg, D30 x 54mm lg shaft end 2: 70mm lg - thread M25 x 1,5 x 20mm lg - D25 x 50mm lg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device  ...

Description Conical Twin Screw Extruder Conical screw diamter 50 - 104,6 Screw length 1000 Motor power 29,6 kW nr. 4 Cylinder zones nr.1 vent Forced feed Working hours 54910

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of the screwing unit - adjustable distance between screwdrivers 42-110 mm - Automatic screw connection - automatic automatic movement alignment - the ability to work as a screwdriver - screw depth sensor - powerless steering control - Specific feed account Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - screw depth sensor - horizontal pressure

Blanchierschnecke, Blancheur, Stainless steel, Heating screw, Cooling screw used, Manufacturer: KOMEN & KUIN D.V. Diameter approx. 900 mm, Drum length approx. 6000 mm Stainless steel Double-walled Drive variable gear motor 3 kW 380 / 420 V Total dimensions approx. 7000 x 1800 x 2200 m. the matching feeding screw can be found here. Changes and errors in the technical data and information excepted.

Feed screw stainless steel used Manufacturer: KOMEN & KUIN D.V. Diameter approx. 500 mm, Conveying length approx. Mm Stainless steel Drive 3 kW 380 / 420 V Total dimensions approx. 4 x 1.6 x 1.6 m. The screw was mounted on this screw blancher Changes and errors in the technical data and information excepted.

OHK Stainless hopper and screw ModeL: BTO Stainless 300Kg hopper with twin screw discharge, 200mm screw diameter, 3Ph

Ball screw with servo motor SIEMENS linear guide with permanent servo motor SIEMENS Type: 1FK6044-7AH71-1EG0 Ident No. YF RN22 5076 01 001 Year of construction: 2003 Axis movement: 540 mm Total length: 900 mm Shaft diameter: 40 mm Thread pitch: 40 mm Ball diameter: approx. 6 mm- Compact unit with servo motor and spindle nut - Ball screw rotion-proof guidedle, drive via mother ball screw 40 mm (hollow shaft, inner diameter = approx. 22mm) - Permanent Servomotor SIEMENS Type: 1FK6044-7AH71-1EG0 (Serial No: Ident No. YF RN22 5076 01 001) Overall dimensions L x W x H: 900 x 200 x 330 mm Weight: 30 kg good condition Removed from a functional special machine, tested before removal. 10 pieces available The indicated price refers to 1 piece; used

Overview The solo screw capper was manufactured from Adelski in 2000. As it is not needed any longer in the filling line it is for sale. The machine has one screw capping head . The cap sorting system belongs to the scope of supply. The machine was dismantled recently and is in technically good condition. A change over to a BVS 30 x 60 can be offered on request, same as PP caps. Tech Specs: Capacity: up to 2,500 bph Number of capping places: 1 Working direction: counter clockwise Control: Siemens S7 Processable caps: MCA 28 x 15 and 28 x 44 Accessories: Screw cap sorting system

Straight screw-in fitting, screw-in fitting, cutting ring fitting, 8 pieces PARKER GE15LR1/2KEGMS Operating pressure: max. 200 bar Material: Brass Tube outer diameter: Ø 12 / 10 mm width across flats: 24 / 27 mm with nut and cutting ring New ! Also available in other quantities ! Dimensions ( single screw connection ): 50 x 25 x 22 mm Dimensions ( packaging ): 125 x 60 x 50 mm

90° screw-in angle, elbow screw connection, 44 pieces LANDEFELD WE 38 MS ( WE38MS ) Material: Brass Thread: G 3/8 ( inch ) Other quantities on request ! New ! Dimensions ( single screw connection ): 45 x 41 x 25 mm Dimensions ( packaging ): 135 x 90 x 60 mm

Angle screw-in fitting, compression fitting, 18 pieces SERTO SO 42421-10-1/4 018.2401.270 Operating pressure: max. 95 bar Material: brass pipe outer diameter: Ø 10 mm screw-in thread: R 1/4 ( inch ) width across flats: 14 / 17 mm with nut and clamping ring similar LANDEFELD KWE 1410 MS Other quantities on request ! New ! Dimensions ( single screw connection ): 40 x 34 x 17 mm Dimensions ( packaging ): 135 x 90 x 60 mm

Screw conveyor with heater and nozzle PAGUS screw conveyor: Diameter: Ø 36 mm pitch: 36 mm length: 580 mm Material: stainless steel drive: spline shaft profile, Ø 28 mm, 4 wedges length: 80 mm nozzle diameter: Ø 5 mm 2x liquid heater 4x electric heater: ETB KZ 8601 1.6 kW ( 4x 0.4 kW) 220 V AC screw conveyor housing: Ø 80 mm Mounting thread: M64 x 2.0 New ! Dimensions: 770 x 140 x 115 mm

Self-drilling screw with sealing washer, magazined, 800 pieces SFS SXL2-M-S16-6,3x25 spedec SXL Screw diameter: Ø 6.3 mm Screw length: 25 mm width across flats: 8 mm Disc diameter: Ø 16 mm Packing: 8x 100 pieces Material: Stainless steel A2 New ! Dimensions ( single package ): 210 x 200 x 60 mm Dimensions ( packaging ): 400 x 210 x 200 mm

Self-drilling screw with sealing washer, approx. 430 pieces SFS SXW-S16-6,5x50 spedec SXW Screw diameter: Ø 6.5 mm Screw length: 50 mm Width across flats: 8 mm Disc diameter: Ø 16 mm Material: Stainless steel A2 New ! dimensions ( single package ): 200 x 160 x 80 mm Dimensions ( packaging ): 200 x 160 x 160 mm

Dairy pipe screw connection, milk pipe nuts, stainless steel screw connection -Size: DN 40 -Nuts: 15 -Screw connection: 30 -Price: complete -Weight: 14 kg

Dairy pipe screw connection, milk pipe nuts, stainless steel screw connection -9x size: DN 65 -9x size: DN 80 -5x size: DN 100 -Screw connection: 23 -Price: complete -Weight: 12 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, -Rexroth: R15104D977/R15104D973 -Shaft: Ø 38 mm -Thread length: 1150 mm -Number: 2x spindles available -Price: complete -Dimensions: 1710/330/H250 mm -Weight: 54 kg

Manufacturer: Future Tech Model: Single Screw PS/PP Extrusion Line Year: 2016 Condition: Excellent Availability: Immediately Materials: PS-PP grnulate Material Width Range: 0.18mm – 1,2mm Max Sheet Width: 750mm Output: 450kg/hour Main Extruder: 120mm single screw extruder air cooled 90kW ac motor & inverter Co-Extruder-1: 65mm single screw with 30kW ac motor & inverter Running from 0.18mm to 1.2mm thick PS/PP up to 450kg/hr. Mix of virgin an regranulate Vented 120 mm extruder with liquid ring vacuum pump system. Screen changers with GOODI systems. Feed block with selector plugs. 750mm wide flex lip single manifold sheet die. Max net width of the sheet is 750mm. Manual T- die. Flex bottom lip. Fixed uper lip. 1100mm wide 3 roll polishing stack with horizontal configuration ( 300mm x 450mm x 450mm diameter). Individual inverter speed drives. Max roll weight 200kG. ...

Mixing and granulating line with twin screw extruder 2CV.70.HT/41D. PP, PA6, EPDM. Screw diameter 63, length 2800. Strand granulation, storage silo, turbo mixer, 4 weighing dispensers, injection molding machine, laboratory single screw machine. Lots of different equipment.

Producer: Metalchem sp z o.o. (today ICHEMAD-Profarb sp. o.o., ichemad) A demonstration device, presented at the fair. Product: single-screw extruder with a head with a spiral core Purpose: for the production of single-layer HDPE pipes in the form of granules, up to a diameter of 250 mm The main technical parameters: extruder: - screw diameter 90 mm - the relative length of the screw 30d - barrier type barrier, high-performance for HDPE - installed power ~ 170 kW - design performance ≥ 450 kg / h   Head - number of heating zones 8 - heating power 33.4 kW (230V) - equipment: fitted mouthpiece and a core for the production of Ø180x16,4 pipes   Control system: The extruder is equipped with a microprocessor control and visualization system based on a central Allan Bradley controller with an industrial monitor with a function keyboard with standard contro ...

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servo motor, -Manufacturer: Swedrive, screw jack type AL 25 -Translation: i = 16.5 -Spindle stroke: 250 mm -Shaft: Ø 30 mm -Motor: Siemens 075 kW / 1395 rpm -Dimensions: 440/485/H160 mm -Weight: 26 kg

General SKU354T994 LocationBarneveld MakeK-tron TypeSODER LWF D4 No.160302-01/86020 Main Features MaterialStainless steel Motor0.25 KW Inlet diameter100 mm Specified Features - Metering screw MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Metering screws Metering screwcheck Screw diameter20 mm Pitch10 mm Shaft diameter15,75 mm Screw length200 mm With hoppercheck Capacity± 39 Ltr. Hopper sizesdia. 320x590 mm Inletdia. 100 mm Outletdia. 42 mm With motor0,25 kW With breaking/mixing shaftcheck Motor0,18 kW 380/220 Volt Information Year of construction2001 Mounted on framecheck Floorspace0,6x0,6 m Total height1,35 m Weight160 kgMetering screwsK-tronDosing units > Metering screwsBrand > K-tron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...