screw used for sale

Is set up in container Auction-ID: A1-50864-64

Robust metal structure with several adjustable clamping stations. Parallel groove work table, equipped with 3 set screws with operating handles. Set on metal frame with mobile supports on wheels, ideal for pressing and assembly operations. Size: 2500 x 1250 Functional Auction-ID: A1-51273-24

Is set up in container Auction-ID: A1-50864-63

Equipped with oil/water separator; absorption dryer; filter unit; Built-in container (300x242x255cm). Auction-ID: A1-50864-20

Motor power 55 kW (75 hp), with frequency inverter. Operating pressure up to 13 bar and air flow rate up to 10.7 m³/min depending on operating pressure. Designed for industrial compressed air production, with speed regulation to adapt the flow rate to needs. Auction-ID: A1-51273-2

motor power 55 kW (75 hp), with frequency inverter. Operating pressure up to 13 bar and air flow rate up to 10.7 m³/min depending on operating pressure. Designed for industrial compressed air production, with speed regulation to adapt the flow rate to needs. Auction-ID: A1-51273-1

Conventional turning machine GRAZIANO SAG 14 - 180 x1000 mm, The Graziano SAG 14 is an Italian-made centre lathe, renowned for its high rigidity, precision, and long-term reliability; it features a natural gap, allowing for the machining of large-diameter workpieces near the headstock., Height centres: 180 mm, Distance between centres: 1000 mm, Bed width: 280 mm, Swing over crosslide: 220 mm, Spindle nose cam-lock din55029: 5 , Spindle speed: 40-1500 giri/1, Number of spindle speeds: 12, Spindle bore: 51 mm, Taper of quill mt: 4, Tailstock quill diameter: 4 Kw, Spindle motor power: 50 mm, Approx net weight: 1.400 Kg, Accessories: Self centering chuck, quick change tools turret

turning diameter: Ø 2000 mm turning length: 3500 mm turning dia. over face-slide: 1500 mm total power requirement: 28 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 10 x 3 x 3 m No. 4944 RAVENSBURG K 66 - 3500 (4350) Working range: Sph.1050x Spw.3500 (4350) Drive: 28 kW Faceplate Ø 1500 mm Tailstock Bed extension 700 mm Roller support Ø 150 - 1400 mm steady rest Lathe Ø 2000 / 1500 Spindle bore 90 mm Speed range 0.6 - 250 min-1 Space requirement approx. 10 x 3 x 3 m Weight approx. 22 tons 20 % discount for ex-works delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaeser BSD 62 screw compressor, year 2002, 7.5 / 10 bar, approx. 6.2 m³/min, 37 kW, Sigma Control. Used, functional and immediately available. Last overhaul and service in 2024. Location: 3525 Lugendorf, Austria.

Turning length: max. approx. 1000 mm, centre height: approx. 250 mm, with coolant device, machine light, 4-jaw chuck, diameter: approx. 250 mm, hollow spindle diameter: 60 mm

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 42 mm -Max. height: 55 mm -Dimensions: Ø 48/42 mm -Submission/Price: complete -Transport dimensions: 96/42/H42 mm -Total weight: 1.0 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 50 mm -Max. height: 70 mm -Dimensions: Ø 50/50 mm -Submission/Price: complete -Transport dimensions: 100/50/H50 mm -Total weight: 1.2 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 4 pieces, for machine tools and systems -Minimum height: 70 mm -Max. height: 102 mm -Dimensions: Ø 48/70 mm -Submission/Price: complete -Transport dimensions: 96/96/H70 mm -Total weight: 3.2 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes -Screw stand: Fixator for machine tools and systems, 1 piece -Minimum height: 215 mm -Max. height: 295 mm -Dimensions: Ø 100 x 215 mm -Weight: 12 kg

Dimensions: 687 x 80 x 97 cm (L/W/H) Spare parts for paper production/spiral conveyors Auction-ID: A1-51285-436

Dimensions: 687 x 80 x 97 cm (L/W/H) Spare parts for paper production/spiral conveyors Auction-ID: A1-51285-435

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., including horizontal feeding screw with hopper, inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with safety device, level control window, 250 mm Ø discharging pipe on bottom side for quick discharging, opening on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxili ...

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaeser Aircenter SK 22 screw compressor Professional Kaeser Aircenter SK 22 screw compressor , year of manufacture 2022 . Compact compressed air installation suitable for professional and industrial use. Specifications: Brand: Kaeser Model: Aircenter SK 22 Type: Screw Compressor Year of manufacture: 09/2022 Power: 11.0 + 0.49 kW Maximum operating pressure: 8.0 bar Engine speed rating: 2,960 rpm Supply voltage: 400 V Frequency: 50 Hz Number of phases: 3 Full load current: 26 A Permissible ambient temperature: 3 – 45 °C Serial Number: 1568 8815503 Part number: 101991.01 CE marking: yes Origin: Made in Germany Version: Aircenter version Screw compressor Integrated compressed air installation Suitable for professional and industrial applications Note: specifications according to the existing rating plate. Buyers are advised to check ...

Screw ø 75-36D; approx. 660 kg/h Co Extruder Year 2015

Key data: 40 mm, 28

Werner & Pfleiderer ZSK 40 twin-screw extruder – very good condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin screw extruder. Technical data: - Screw diameter: 40 mm - Screw length: 7 housing x 4 D, approx. 28 L/D - Main drive: 34.5 kW - Engine speed: 1,800 rpm - Screw speed: 40-400 1/min - Max. torque per worm shaft: 325 Nm - Electric heating: approx. 17 kW - Cooling: Water cooling unit - Temperature control zones: 6 - Housing temperature measuring points: 6 - Material temperature measuring point: 1 - Material pressure measuring point: 1 Housing configuration: - Inlet housing with liquid addition opening - Open housing with insert and two liquid addition ports - Several closed housings with holes for liquid addition or measuring points - Degassing housing Co-rotating, densely interlocking and self-cleaning screws. High mixing and di ...

Key data: 83 mm

Twin screw extruder Werner & Pfleiderer / Coperion ZSK 83 For sale is a ZSK 83 twin screw extruder (co-rotating) from Werner & Pfleiderer / Coperion. The machine is in very good condition and has been regularly serviced. Technical details: - Model: ZSK 83 - Screw system: co-rotating twin screws - Engine power: 46 kW - Cylinder: water-cooled - Degassing zone: present - Dosage: included (as in the pictures) - Replacement screw elements: available - Control / control cabinet: good condition, fully functional The plant is ideal for compounding, masterbatch, recycling, polymer and filler applications. The extruder has been overhauled if necessary and has been technically tested. On-site inspection and test run possible by arrangement. Transport worldwide possible. Further photos, data sheets and videos are available.

Key data: 30 mm

Twin Screw Extruder / Laboratory Extruder - 2 x 30 mm screw diameter - 4 heating zones - Dosage - Control Used machine, fully functional.

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Boge, screw compressor type S 15 -Drive power: 11 kW -Volume flow rate: 1.45 m³/min -Max. pressure: 10 bar -Refrigerated compressed air dryer: Type DT 18 -Compressed air tank: Capacity 350 L -Filter: with contamination indicator -Condensate drain: Type CCD 10 -Individual components: see photos -Dimensions: 1870/800/H1560 mm -Weight: 400 kg

Includes steel base. This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-7

Manufacturer: KAESER Kompressoren Model: ES 300 Machine no.: 1.7629.10040 Serial no.: 1002 Year of manufacture: 1999 Type: Stationary rotary screw air compressor Nominal power: 160 kW Motor speed: 1,500 rpm Maximum working pressure: 8 bar Operating hours: approx. 21,344 h Load hours: approx. 15,156 h Equipment: Integrated electric motor Control panel Operating/load hour counters Pressure gauge Sound-insulated enclosure Condition: Used Auction-ID: A1-50932-118

Equipped with 15 inspection hatches, screw diameter approximately: 350mm. Including transport auger from the ploughshare. This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-8

equipped with double ribbon auger, motor power: 2 x 2.2 KW, 1x Dutchspiral subsoiler, motor power: 2.2 KW, 1x weighing auger: type: U 500 x 2625, motor power: 4 KW (2018). This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-5

This lot is part of the final combination 20 ( The drying room installation 4 to 19). Additional costs are involved for dismantling this lot, and will be delivered by appointment Auction-ID: A1-50763-6

Hydraulic reservoir, hydraulic tank, aluminum container for hydraulic pump, hydraulic power unit, filler and vent screw, vent screw with oil dipstick -Manufacturer: MP Filtri, bleed screw with oil dipstick -Material: Plastic, measuring rod made of polished steel / filter element made of steel -Measuring length: 200 mm -Quantity: 9 pieces available -Price: per piece -Dimensions: Ø 40 x 230 mm -Weight: 0.1 kg

Hydraulic reservoir, hydraulic tank, aluminum container for hydraulic pump, hydraulic power unit, filler and vent screw, vent screw with oil dipstick -Manufacturer: MP Filtri, bleed screw with oil dipstick -Material: Plastic, measuring rod made of polished steel / filter element made of steel -Measuring length: 110 mm -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 40 x 140 mm -Weight: 0.1 kg

Offer 26334 Technical data: - Operating hours 28407 h - Operating pressure 12.75 bar - Delivery rate 1.95 m³/min - Drive 400 V / 11 kW - Motor speed 3000 rpm - Integrated dryer - Space requirement approx. W 1500 x H 1600 x D 750 mm - Weight approx. 420 kg

with refrigerant dryer, manufacturer Ultrafilter, type: DU0230, serial number: 2200245986, year of manufacture: 2014, connection: 230V, power: 0.92kW. Auction-ID: A1-51529-146

with Boge Model D29 refrigeration dryer, Landefeld oil-water separator and VIG compressed air tank. Auction-ID: A1-51529-82

Industrial Atlas Copco GA 15 FF enclosed rotary screw air compressor suitable for workshop and production compressed-air applications. The compressor is equipped with an Atlas Copco Elektronikon electronic control panel providing operating status and compressor monitoring. The display powers up in the photographs and shows a system message with a pressure reading of approximately 6.4 bar. The unit is installed with a large galvanized ventilation/extraction hood and connected ductwork above the compressor. Auction-ID: A1-51282-25

UV spectro/screw with pellet, computer and software Auction-ID: A1-51535-20

Industrial Kaeser rotary screw air compressor, model ASD 47 T SFC, manufactured in 2006. Enclosed stationary compressor equipped with Kaeser Sigma Control electronic controller and integrated frequency-control system. In set with container. Auction-ID: A1-51282-16

L & Z lathe / WEILER CONDOR AC / Stepless speed regulation / FROM A TRAINING FACILITY - CE - Marking -Year of manufacture 2000 -Turning diameter over face slide 180mm -Tip height 165mm -Max. turning diameter 330mm -Turning length approx. 800mm -Speed (infinitely variable) max. 2800 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch etc. -Three-jaw chuck -Tailstock -Swarf back wall -Machine light -Multifix base holder & 6x inserts -Various interchangeable wheels -Coolant device -Miscellaneous operating tools -Documentation Dimensions: LxWxH 1.8x1x1.8 meters / Weight 1300Kg

Pallet of 1,300 screw glass jars – Approx. 40 cl – Without lids Lot of 1,300 cylindrical transparent glass screw jars, each with a capacity of about 40 cl, packaged on pallets. Jars sold without lids, to be cleaned. Important information – to be read before bidding Goods from discontinued and surplus products, sold as is. The information in this description (quantities, capacities, dates, composition) is provided by the seller. The photos, quantities, dimensions and weights are not contractual. The appearance of the packaging and products may vary from one item to another. A visit is strongly recommended before bidding. The buyer bids with full knowledge of the facts and remains solely responsible for his or her appreciation of the lot. Auction-ID: A1-51086-31

Offer 26333 Technical data: - Total operating hours 56167 h - Operating pressure 10 bar - Delivery rate 14.5 l/s - Drive 400 V / 7.5 kW - Space requirement approx. W 950 x H 1250 x D 850 mm - Weight approx. 250 kg

Ø25 mm and 35 mm, protective covers Auction-ID: A7-51576-7

Salt Silo. Capacity: approx. 30,000 liters. Tank height: 12 meters. Tank diameter: 223cm. With stainless steel tank and dosing screw. Auction-ID: A1-42990-150

Suitable for dewatering organic waste, and separating solids and liquids into waste streams. Trenn-Tec Type: S15, stainless steel food-grade version. History and documentation available. Auction-ID: A1-42990-203

Equipped with Schneider UniMaster ST 270 liter pressure barrel, Schneider DK 985 Eco air dryer and Schneider Öwamat 10 oil-water separator Auction-ID: A1-51062-153

: 0554 mm : 370 mm : 3000 mm : 280 mm : 104 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80

Year of manufacture 1993 Complete wardrobe DC Motor Plating system in bad condition Complete heating system 7 heating area screw diameter 80 mm, size 275 l. x 145 w. x 80 h. cm

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width x ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Graphics control C55 D Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with elek. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weigh ...

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: C55D Graphics Controller Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator with electr. Arrester Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V /  ...