screw used for sale

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

Code: 0350 Brand: FINI Model: KSC 5 - CE Standard Screw air compressor with dryer - CE Standard Compressor FINI KSC 5 CE Standard Motor 5,5 Hp Pressure 10 bar Rotational speed 1450 rpm Air flow 450 lt/min Tank capacity 270 lt Compressed air dryer HITEMA EDR 2.6 - CE Standard Flow rate 36 mc/h - 600 lt/min Rated power 0,19 Kw Volt 220 Overall dimensions: Compressor mm 1350 x 600 x 1200 h - 168 kg Dryer mm 350 x 450 x 770 h - 33 kg

Type: Flexible auger Length: 5 m Engine: Electric motor Equipment: Flexible hose with suction probe Use: Transfer of materials (pellets, chips, etc.) Status: Good overall condition Auction-ID: A1-45418-16

Atlas Copco GA11VSD+FF screw compressor Including: Atlas Copco FX40 Cooling Air Dryer 900 litre buffer tank Year compressor construction: 2017 Year of refrigeration air dryer: 2022 Compressor size: 1420 x 600x 630 cm Refrigerator air dryer size: 100 x 60 x 420 Standing buffer tank size: 220 x 85 cm Working disassembled, hours not known Depicted air shafts can also be taken with you if interested. Auction-ID: A1-41991-75

COMPRESSOR from 2007 Yield: 2.2 M3/hour Noise level at 1 meter: 61 DB(A) Working voltage: 3x 400V (+/- 5%) DRYER from 2017 Nominal capacity: 3100 L/min. – 186 m3/hour Minimum inlet pressure: 4 bar Maximum inlet pressure: 14 bar Maximum air intake temperature: 70 degrees Compressed air connection: 11/4\" Dryer dimensions: 535mm x 515mm x 805mm(LxWxH) Auction-ID: A1-41991-16

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-51

Screw Air Compressor 11kW. Current：15HP /11kW ( Y-Delta Start). Flow Rate:1.6 m3/min (56CFM) Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 320kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-179

Screw Air Compressor 11kW. Current：15HP /11kW ( Y-Delta Start). Flow Rate:1.6 m3/min (56CFM) Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter. Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 320kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-43

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-283

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-40

Atlas Copco GA11VSD+FF screw compressor Including: 500 litre buffer tank Compressor year: 2007 Compressor size: 100 x 800 x 600 cm Standing buffer tank size: 205 x 60 cm Working disassembled, hours not known Auction-ID: A1-41991-76

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-7

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-95

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-282

Screw Air Compressor 15kW. Current：20HP /15kW( Y-Delta Start). Flow Rate:2.2 m3/min (77CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size：G3/4. Lubricant Oil: 10Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 830 x 1300 x 1200 mm; Approx. Weight: 339kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-284

Screw Air Compressor 7.5kW. Current:10HP /7.5kW/ 10A ( Soft Start). Flow Rate:1.1 m3/min (38CFM). Pressure: 8Bar. Power supply: 380v 50hz 3phase. Single Stage. Motor Protection: IP54. Air Out Let Port Size: G1/2. Lubricant Oil: 5Liter Machine condition: unchecked. Approx. Transport dimension: LxWxH 750 x 980 x 1010 mm; Approx. Weight: 206kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45363-47

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 01864 10 Built in 1993 max. pressure 13 bar Power consumption 11 kW Delivery volume 1,150 l/min Operating hours 34,957 B/h Defective contactor replaced Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y2-1

Operating conditions of this machine: unchecked. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-250

Manufacturer Boge Machine number 50373302 Type CL 20 Year of construction 2010 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,240 l/min Operating hours 14,770 B/h Idle hours 2,428 B/h Nearest customer service in 2,894 B/h lxwxh 134x68x62 cm Weight 300 kg Loading costs 50.00 Euro Auction-ID: 043-H7J-3

Screw compressor Mark MSB 22 IVR defective Manufacturer: Mark Type MSB 22 IVR Machine number CAI 597705 Year of construction 2012 max. pressure 13 bar Power consumption 22 kW Delivery rate 3,517 l/min at 7.5 bar Operating hours 11,522 B/h Load hours 10,864 B/h Frequency converter needs new software lxwxh 130x78x120 cm Weight 458 kg Loading costs 50,00 Euro Auction-ID: 04J-7Y1-1

Screw compressor Cecatto CSM 15 Bj.2011 10 bar Manufacturer: Cecatto Cecatto is part of the Atlas Copco Group Also sold under the name Mark Airpress Machine number CAI 511821 Type Plus CSM 15 XB Year of construction: 2011 max. pressure 10 bar Power consumption 11 kW Delivery volume 1,420 l/min Operating hours 28,498 B/h Test run carried out LxHxW 82x65x100 Weight 180 kg Auction-ID: 047-DXM-3

Mannesmann Demag Start 026 Manufacturer: Mannesmann Demag Machine number 349012/23 Type Start-026 Year of manufacture 1996 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,010 l/min Operating hours 33,700 B/h Load hours 16,400 B/h Test run carried out lxhxw 72x72x113 cm Weight 250 kg Loading costs 50,00 Euro Auction-ID: 04J-7XW-1

Speed-controlled screw compressor Renner RSKF 1-30 incl. refrigerant dryer and particulate filter Manufacturer Renner Machine number 1008121 Type RSKF 1-30 Year of construction 2021 max. pressure 10 bar Power consumption 30 kW Delivery rate 4,810 l/min Operating hours 11,760 B/h Load hours 8,671 B/h Machine utilization: 20-40% 799.87 B/h 40-60% 632.50 B/h 60-80% 427.45 B/h 80-100% 198.18 B/h Last service at 11,090 B/h incl. control unit for the frequency converter Particulate filter, connection cable and connection hose lxhxw 108x64x121 cm Weight 850 kg Loading costs 100,00 Euro Auction-ID: 04J-7Y8-1

Screw compressor Boge S 20-2 Manufacturer Boge Machine number 509692 Type S 20-2 Year of manufacture 2005 max. pressure 10 bar Power consumption 15 kW Delivery rate 2,240 l/min Operating hours 18,903 B/h Idle hours 1,613 B/h Customer service due LxHxW 120x88x115 Weight 350 kg Auction-ID: 047-DXL-3

Manufacturer Atlas Copco Machine Number API 432897 Type GA 30 VSD Year of construction 2012 max. pressure 12.8 bar Power consumption 30 kW Delivery rate 5,580 l/min Operating hours 34,011 B/h Machine utilization: 1-20 27% 20-40 30% 40-60 26% 60-80 12% 80-100 5% Test run carried out lxwxh 134x86x148 cm Weight 600 kg Loading costs 75,00 Euro Auction-ID: 043-H7G-3

- Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-47

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 2233 Year of construction 2002 max. pressure 7.5 bar Power consumption 11 kW Delivery volume 1,855 l/min Operating hours 64,145 B/h Load hours 48,778 B/h Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7XZ-1

Screw compressor Renner RSK 22 with refrigerant dryer Manufacturer Renner Machine number 21194 Type RSK 22 Year of construction 2009 max. pressure 10 bar Power consumption 22 kW Delivery rate 3,100 l/min Operating hours 35,160 B/h Load hours 10,416 B/h Nearest customer service in 1,986 B/h Test run carried out lxhxw 175x87x129 cm Weight 588 kg Loading costs 100,00 Euro Auction-ID: 04J-7XY-1

Screw compressor Alup Largo 76 Delivery volume 12,240 l/min Manufacturer: Alup Alup is part of Atlas Copco Machine number API 172497 Type Largo 76 Year of construction 2014 max. pressure 10 bar Power consumption 75 kW Delivery volume 12,240 l/min Total hours 28,418 B/h Load hours 28,130 B/h lxwxh 190x106x165 cm Weight 1,570 kg Loading costs 200.00 Euro Auction-ID: 04D-2WS-2

Operating conditions of this machine: unchecked. This item is delivered loaded on a truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-171

Screw compressor Kaeser SK 19 Manufacturer: Kaeser Type SK 19 Machine number 1017 Built in 1999 max. pressure 10 bar Power consumption 11 kW Delivery volume 1,590 l/min Operating hours 40,914 B/h Test run carried out lxwxh 84x78x101 cm Weight 270 kg Loading costs 50.00 Euro Auction-ID: 04J-7Y0-1

Screw compressor Alup Allegro 11 Year of manufacture 2022 3,400 B/h speed-controlled Manufacturer: Alup Alup is part of Atlas Copco Machine number ITJ 698213 Type Allegro 11 Year of construction 2022 max. pressure 13 bar Power consumption 11 kW Delivery rate 1,860 l/min at 7 bar Total hours 3,400 B/h Machine utilization: 1-20 1% 20-40 70% 40-60 17% 60-80 10% 80-100 2% Test run carried out lxwxh 118x68x95 cm Weight 259 kg Loading costs 50.00 Euro Auction-ID: 04J-7XX-1

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Shelf not included, separate lot. Auction-ID: A7-45181-26

Unaudited Auction-ID: A7-45427-216

Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153

Kaeser DSDX243SFC screw compressor 132 kW with 8.5 bar and 26.90 m3/min. Inverter integrated. New stage installed at around 45,000 hours

Spice jars with screw lids, 45 pieces New and used + 5 pieces E3 containers, WITHOUT PALLET ! Auction-ID: A7-45675-6

8 telescopic pull-outs, 1 swing door, Digital Thermometer RS pro RS 41 Auction-ID: A1-45526-19

Kaeser DSD202SFC screw compressor 110 kW 10 bar 20.30 m3/min Inverter integrated. Stage 1x exchanged New oil filter and oil.

Equipped with DryEnergy refrigeration dryer and standing 1000L pressure vessel of 220 x 90 cm. Auction-ID: A1-41992-114

Equipped with: emergency stop, lcd display, main switch. Auction-ID: A1-41992-108

Operating pressure: 7.5 bar Size: approx. 2400 × 1250 × 1450 mm Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-739

Volume flow: 18.16 mc/min Operating pressure: 13 bar Suction pressure: 1 bar Speed: 2200 rpm Approximate dimensions: 2500 x 1400 x 2200 mm Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-711

This semi-automatic capping machine with lowering head closes aluminum screw caps (pilferproof and other types of caps) with or without pouring spout and twist-off caps (for pots). The machine can also be configured for special applications. The operator places the bottle on the plate, with the cap manually on the neck. By pressing the two buttons on the sides of the machine, the closing head lowers and closes the capsules within seconds. With the help of the right components, the lowering head capping machine can close the following caps: - Stestelvin type - BVS type - MCA type (three-phase version) - pilferproof type The machine is equipped with the special \"No Cap No Roll\" 4-roller head, made entirely of stainless steel. Easy to use Insert the bottle with the capsule to be closed and press the two-hand control to insert the cap in seconds. TECHNICAL FEATURES Descending He ...

3 x AEG cordless screwdriver, 4 times AEG charging station, 9 batteries Auction-ID: A7-45768-78

Control: Sigma Control 2 Including: Cyclone cutter KAESER f26 KC with electronically level-controlled steam trap ECO-DRAIN 31 G1 Oil-water separator Kaeser AQUAMAT CF6 Adsorption dryer Kaeser DC 18E 95 Dimensions 750x750x1950 mm WxLxH Weight 220Kg Activated carbon filter F22KA G3/4 Pressure vessel 11 bar Standing volume: 1000L Including:Valve set and condensate emptying ECO-DRAIN 31 Overflow valve 44-6B G3/4 PN16 4-10 bar Auction-ID: A1-45762-116

Technical data Manufacturer: Grötzinger Type: SPP 30/90 Year of Make: 1973 Machine number: 10481173/4715 Printing capacity: 30 t Working stroke: 250 mm Cutting surface: 750/1 mm² Working length: 450 mm Work table width: 390 mm Weight: approx. 770 kg Configuration Machine type: Press Nameplate information: Manufacturer: Grötzinger, Pforzheim Execution: Industrial press with 30 t pressure capacity and 250 mm stroke Auction-ID: A1-45711-116