screw pump used for sale

Wabeco screwdriver with industrial screwdriver Fein AS sd 715-1 Industrial screwdriver: Fein AS sd 715-1 1000 rpm 42 V / 40 W / 1A Foot control by Hans Bernstein The hand lever is used to guide the industrial screwdriver upwards against the spring, hold the screw in position, release the lever and start the rotary movement with the foot switch. Due to the spring pressure and the dead weight, the screwdriving process is carried out without manual effort.

Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 260 mm, 520 mm, 16 U/min

mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...

ATLAS COPCO screw compressor mod. GA37 – CE compliant – used - 37 kw - 7.5 bar - 104 l/s - matr. AII 318838 - year 1995 - COMPLETE WITH MANUAL AND CE DECLARATION

Key data: 400 mm

Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder

Key data: 340 mm

Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes

Key data: 400 mm

Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets

Key data: 460 mm

Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added

SPECIFICATIONS: Installed power 26 kW Maximum pressure: 13 bar Working pressure: 7 bar Hours: 460

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg

Key data: 400 mm, 800 mm

For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA

Dosing screw conveyor BOSCHE 150 mm diameter Length 1.30 m Engine 1,5 kw 32 rpm right-hand thread, slope 110, at the outlet slope 150, Sliding Inlet 270 x 680 mm, outlet 170 x 170 mm Review and test run in our qualified workshop done Good condition

BÜHLER MWSB-100 dosing screw conveyor for weighing 100 mm diameter, length 2.75 m Engine 0.75 kw, rpm 107 Thread in the inlet progressive, inlet ø 390 mm, Outlet ø150 mm with pneumatic outlet Very good condition

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

Screw compressor Manufacturer: GHH Rand Model No.: CS80/3 Speed range: 2000 - 2950 Max. volume flow: 710 m³/h at max. working pressure 2.5 bar max power consumption 48kW The compressor is in good condition. Signs of use are present. for more details see pictures

Screw Capper Dr. Datz with 4 capping heads, with electric height adjustment, Capacity: 8,000 bph, running direction: left-right, 28 mm closure

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Mitutoyo U-Clamp Gauge as good as new unused Mod. 105-408 Gauge 1000-1100 mm in the original List price 3450 €

3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition

2 pieces single-stage screw tensioning device with replaceable pulling element Thread M 85 and M100 with hydraulic power unit

Delivery rate 4.61 m³/min at 10 bar Delivery rate 5.23 m³/min at 8 bar Operating pressure 10 bar Nominal power 30.0 KW Operating hours 14,279 Load hours 11,148 Compressed air connection G1 1/4" Sound level 69 dB(A) Space requirement L - 1,400 x W - 830 x H - 1,640 mm Weight approx. 850 kg

Electric screwdriver, servo screwdriver, with torque adjustment ATLAS COPCO QMR42-25-RT Tool holder: 3/8 R SERVO MOTOR: BSM 2260C-R4. 3 4230 1704 81 speed: max. 7000 rpm voltage: 22 V at 1000 rpm QRT38050 4230161380 New !' Dimensions: 590 x 120 x 45 mm

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw Precision Measuring Tools Suhl Range: 75-100 mm Accuracy: 0.01 mm metric including test dimension with protective box

U-Clamp Screw with Plate Fine Measuring Tools Suhl Range: 100 - 125 mm Accuracy: 0.01 mm TGL15046/I with protective box

Shackle Measuring Screw Precision Measuring Tools Suhl Range: 100 - 125 mm Accuracy: 0.01 mm metric including test dimension with protective box

Screw gauge with plate Fine measuring tools Suhl range: 50 - 75 mm metric including test dimension with protective box

Shackle Gauge MASSI Range: 150-175 mm DIN 863 I including test dimension with protective box

Trapezoidal Lead Spindle DÜRR, BEHR N1504 0036 ( N15040036 ) Thread Length: 510 mm Thread: Ø 11 mm Pitch: 5 mm Flange: Ø 160 mm New ! Dimensions: 900 x 170 x 160 mm

Trapezoidal lead screw DÜRR, BEHR N1504 0035 ( N15040035 ) thread length: 365 mm thread: Ø 18 mm pitch: 4 mm shaft: Ø 11 mm New ! Dimensions: 590 x 118 x 80 mm

Trapezoidal lead screw DÜRR, BEHR N1504 0032 ( N15040032 ) Thread length: 725 mm Thread: Ø 18 mm Pitch: 4 mm Shaft: Ø 11 mm Flange: Ø 160 mm New !' Dimensions: 885 x 220 x 160 mm

Screw module AMT SM1.0-MB BUS 20A 1000189054 Dimensions: 390 x 280 x 70 mm

Trapezoidal Lead Spindle DÜRR, BEHR N1504 0036 ( N15040036 ) Thread Length: 745 mm Thread: Ø 18 mm Pitch: 4 mm Shaft: Ø 11 mm Flange: Ø 160 mm New ! Dimensions: 890 x 198 x 160 mm

Trapezoidal Lead Spindle DÜRR, BEHR N1504 0031 ( N15040031 ) Thread Length: 380 mm Thread: Ø 18 mm Pitch: 4 mm Shaft: Ø 11 mm Flange: Ø 160 mm New ! Dimensions: 590 x 202 x 160 mm

Trapezoidal Lead Spindle PAGUS Thread Length: 1155 mm Thread: Ø 30 mm Pitch: 6 mm Shaft Diameter: Ø 16 / 20 mm Hexagon: 14 mm Thread: M20 x 1.5 New ! Dimensions: 1360 x 30 x 30 mm

U-touch screw FEINMESSZEUGFABRIK SUHL range: 125 - 150 mm TGL 15046/1 with protective box Dimensions: 330 x 140 x 45 mm

Micrometer with prism anvil PAGUS range: 50 - 65 mm accuracy: 0.01 mm with protective box 23x15x3 cm

U-measuring screw FEINMESSZEUGFABRIK SUHL range: 75 - 100 mm DIN 863 / I with protective box Dimensions: 250 x 130 x 35 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 75 - 100 mm M 0.8 - M 6 incomplete! with protective box Dimensions: 310 x 140 x 40 mm

Thread Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 25 - 50 mm M 0.5 - M 5 with protective box Dimensions: 265 x 125 x 40 mm

U-measuring screw FEINMESSZEUGFABRIK SUHL range: 50 - 75 mm TGL 15046/1 with protective box Dimensions: 280 x 150 x 40 mm

Threaded Measuring Screw, Threaded Shackle Measuring Screw FEINMESSZEUGFABRIK SUHL Range: 0 - 25 mm M 0.4 - M 3 with protective box Dimensions: 245 x 110 x 35 mm

U-Clamp Screw CHUAR BRAND Range: 50-75 mm Accuracy: 0.01 mm with protective box Dimensions: 250 x 130 x 35