screw pump used for sale

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit -Manufacturer: VEM, hydraulic unit from Dorstener APE80-3050 press brake -Drive: VEB Type KMER 132 AC P 7.5 kW 1435 rpm -Flow rate: l/min -Operating pressure: bar -Dimensions: 720/340/H335 mm -Weight: 87 kg

Umwaelz pump heating pump pump new and unused, ovp 1 pcs Grundfos UPC 50-120 3-400Volt 50Hz Special price Special price

Vacuum pump, rotary vane pump -Drive: 1.6 kW -Flow rate: m³/h -Max. pressure: mbar -Speed: 2850 rpm -Inlet: Ø 43 mm -Outlet: Ø 43 mm -Price: per piece -Quantity: 1 available -Dimensions: 360/220/H215 mm -Weight: 20 kg

Hydraulic pump, oil pump, gear pump -Max.: 600 rpm -Working pressure: 2 bar -Output: 3 l/min -Number: 1x pumps available -Price: per piece -Dimensions: 95/100/H90 mm -Weight: 2.3 kg

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used ; ready for use

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump -Hand hydraulic pump: with cylinder, unfortunately no type designation -Stroke: 45 mm -Piston rod: Ø 32 mm -Dimensions: see drawing in the photos -Dimensions: 645/230/H480 mm -Weight: 50 kg

Solenoid valve, directional valve, valve terminal, pump preload valve -Manufacturer: Rexroth, pump preload valve for the SYDFE control system -Type: SYDZ 001-13/300V028M -Dimensions: Ø 75 x 120 mm -Weight: 2.9 kg

Centrifugal pump, water pump, immersion pump -Manufacturer: Schmalenberger, immersion pump type ZB 40-18 -Feeding capacity: 27 m³/h -max. H: 5 m -Motor power: 1.45 KW -Speed: 2870 rpm -Pipe connection: see pictures -Dimensions: 300/300/H705 mm -Weight: 34 kg

Edwards Pump Station consisting: Rotary Vane Vacuum Pump: Edwards E1M175 Booster Vacuum Pump Roots Pump: Edwards EH1200 Condition: used General recovery of the geraete is possible with a capacity of 12 months. delivery time: from stock; ready for use

Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Kat. No.: 960863 & 960867 Voltage: 50/60Hz 400V End pressure: 0.8 hpa(mbar) Status: Generalueberholt Gewaehrleistung: 12 months Including: engine restocking, repainting, electric check delivery time: from stock; ready for use

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 68 mm -large recess: Ø 70 mm -Dimensions: Ø 125/H49 mm -Weight: 0.4 kg

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Storage tanks, 10,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. incl. mounting a console at above tank, incl. suction pipe 1 1/4 "as well as corner check valve with adjustable lift protection 1.5 3.0 m The container is externally repainted in RAL7042, traffic grey. (On request, we paint the tank in your House Paint / RAL tone) L = approx. 5.30 m + ...

Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Various MAAG pump E.g. Extrex 90, 70, 56, and 36 Reconditioned available from stock in Wuppertal. more details on request

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

High-pressure pump - see pictures

fuel pump, supercharger carburettor -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 2 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg

Hydraulic pump, oil pump, gear pump -Manufacturer: Garbe Lahmeyer, pump from radial drilling machine Kolb NKR 55 -Type: AV15 / 15 P -Power: 0.6 kW / 1390 rpm -Dimensions: 420/280/180 mm -Weight: 24 kg

Coolant pump ET No.: 37545-80011 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Motor: Thrige-Titan type MTL 11-7 D -Motor: 24 V 3 kW 3000 rpm -Tank: 200/290/H230 mm -Dimensions: 210/320/H510 mm -Weight: 42 kg

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Voltage: 380-415 V 690 W. -Max. Delivery rate: 2 m³/h -Max. H: 36/46 m -Max. Pressure: 6 bar -Max. Temperature: 90 °C -Price: per piece -Number: 2 pieces -Dimensions: 400/143/H203 mm -Weight: 12.4 kg

Pump control for centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump -Ebara: Servopress pressure switch -Pump: 230 V max. 10 bar/1.5 kW -Price: per piece -Number: 2 pieces -Dimensions: 230/180/H240 mm -Weight: 1.8 kg

Pump Allweiler SNEF120ER46D6.9W61-BGOR - see picture Next: ALWEILER pump with tank Diverse pumps ALLWEILER - for cooling etc., approx. 40 bar (see picture)

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 0.37/0.45 kW -Flow rate: 10/12 m³/h -Max. vacuum: 0.85 bar -Speed: 1420/1700 rpm -Dimensions: 360/200/220 mm -Weight: 16 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Gearbox type: SK 20F-100 L/4 -Speed: 120 rpm -Drive motor: Nord -Hydraulic pump: unknown -Dimensions: 900/320/H300 mm -Weight: 119 kg

Centrifugal pump, water pump -Delivery rate: 18 m³/h -Motor power: 1.1 kW -Connection: 380 V -Speed: 1400 rpm -Pipe connection inlet: DN Ø 64 mm -Pipe connection outlet: DN Ø 49 mm -Dimensions: 410/250/H300 mm -Weight: 34 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.22 kW 1350 rpm -Protection class: -Pump output: adjustable -Number: 1x pumps available -Price: per piece -Dimensions: 390/170/H185 mm -Weight: 15 kg

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 16 mm -Price: per piece -Number: 1x available -Dimensions: 160/160/H179 mm -Weight: 7.7 kg

Hydraulic pump, oil pump, gear pump -Shaft mount: Ø 14 mm -Quantity: 1 piece available -Dimensions: Ø 115/190 mm -Weight: 3.7kg

Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: by hand -2x: separate containers with pumps -with return flow: into the tank -Dimensions: 800/530/H1100 mm -Weight: 88 kg/piece

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

Dosing pumps Elados EMP 12500P06 (2 stub) Elados EMP 13300P035 (1 piece) Elados EMP 14000P035 (1 piece)

Pump, gear pump -Manufacturer: Scherzinger, pump from machining center Werner TC 2.6K -Type 250 FB / M075 / GT -Motor power: 0.75 kW -Speed: 1400 rpm -Dimensions: 420/200/190 mm -Weight: 18 kg

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: 380 volts -Power: 0.75 kW -Dimensions: 400/200/H430 mm -Weight: 40 kg

Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 18 mm -Length: 35 mm -Dimensions: 215/153/215 mm -Weight: 6.8 kg

Hydraulic pump, oil pump, gear pump -Internal gear pump -System: Trochocentric -Operating pressure: 175 bar -Delivery rate: 25 cm³/rev -Dimensions: 180I168/H135 mm -Weight: 6 kg

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 0.55 kW 2000 rpm -Max. Delivery rate: 10-50 l/min -without pump housing -Dimensions: 172/260/190 mm -Weight: 9.9 kg

Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used; ready for operation

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 47 mm -large recess: Ø 50 mm -Quantity: 2 available -Price: per piece -Dimensions: Ø 81/H40 mm -Weight: 0.1 kg

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 75 mm -large recess: Ø 115 mm -Quantity: 1 available -Price: per piece -Dimensions: Ø 180/H71 mm -Weight: 0.6 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -Flow rate: approx. 40 l/min -pneumatically driven -Connection: 8 bar max. -Dimensions: 270/200/H140 mm -Weight: 6 kg

Rotary vane vacuum pump- packaging- Manufacturer: Busch Type: 220-80 Vacuum: 0.5 mbar Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use

Semico screw pump +booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul at Busch 6 months ago! Performance: without delivery time: ex stock

Hydraulic pump, oil pump, gear pump -Power: 0.8 kW 1370 rpm -Protection class: -Dimensions: Ø 154/H485 mm -Weight: 26 kg