128,657 used machines on RESALE, but how to find them? Machine Search
Screw compressor C9 Flow rate 1.1 m3/min 10 bar 7.5KW Hours 9000 Schematic E-Parts Compressor is unchecked.
Screw compressor Boge 400 V 11 KW 1.45 m3/min 10 bar Accessories : belts, filters, small parts The compressor goes to fault after switching on:
Dosing screw INOX Length: 200 cm Diameter: 150 cm Motor: 1.1 kW Revolutions: 25
A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...
Recycling machine trade AGICOM- Pedergnana OG: Screw conveyor demonstration device - for the transport of granules. Construction: Metal construction with drive and transmission gear. The discharge height can be adjusted by adjusting the legs. electric motor 1.1 kW; Length 2.5 m
Käser ASK 32 T with integrated cold dryer Screw compressor Age: 2008 Rated Output: 18.5 kW Max. working overpressure: 8 bar Motor speed: 2950 1/min Sigma Control Integrated refrigerant dryer
centre height: ca. 150 mm centre distance: 1300 mm : vorhanden diameter: ca 250 mm digital readout: 1x make: Heidenhain u. Werkzeug-Sc serial number: 63-06 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ref. -No.: 10258 Manufacturer: SCHAERER Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Lining: Forkardt F315 Brand Machine length: 3.800 mm Machine width: 1.300 mm Machine Height: 1.500 mm Weight Of The Machine Ca.: 4 t Tool holder type: Multifix Typ C Turning Length: 1.800 mm Turning Diameter Over Bed: 520 mm Turning Diameter Over Slide Rest: 320 mm Spindle Bore: 62 mm Bezel diameter (inside): 270 mm Hole in the jaw chuck: 84 x 120 mm
Ref. -No.: 10257 Manufacturer: HEIDENREICH & HARBECK Year of construction: 1981 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPM Machine length: 2.900 mm Machine width: 1.200 mm Machine Height: 1.800 mm Weight Of The Machine Ca.: 3,5 t Tool holder type: Multifix Typ B Turning Length: 1.000 mm Turning Diameter Over Bed: 480 mm Turning Diameter Over Slide Rest: 295 mm Bezel diameter (inside): 1 x 145, 1 x 255 mm
used
12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204
used
5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204
Key data: 40 mm, 40 , 600 U/min
Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading
Key data: 65
Extruder 1 Screw 65 Ø diam, 30 L/D Brand: Flag engine: 30 KW (40 hp). With electrical panel. Reference: GT-4706
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Key data: 17 mm, 40 , 1200 U/min
Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Here we offer a strong Schneider screw compressor for sale. A 14 kW variable speed screw with refrigerant dryer and large 500ltr. Kettle. Operating hours approx. 14789, load hours 14348.
Key data: 165 mm, 750 mm, 2800 U/min
Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation
Key data: 60
Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Key data: 50 mm, 30
Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time
Key data: 35 mm, 25 , 107 U/min
used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available
Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
Screw shooting system with Sortimat . up to 3 pcs. available. Have only run for a short time. With Sortimat .
SPECIFICATIONS: Air flow rate L/min: 6000 Operating pressure bar: 8 (variable max 13) Installed power KW: 30.0 Complete with inverter Operating hours: approx. 8000
Key data: 90 m³/min, 3 , 20
Ingersoll-Rand Oil Free Screw Air Compressor L90I A3.5 -14-16-50 pressure generators from 2014, complete (closed module) 1 available Class 0, 1,190 m3/h, 7 – 10 bar. Compressor Ingersoll-Rand L90I Manufacturer: Ingersoll-Rand Model: L90I A3.5 -14-16-50 Type: oil-free screw compr. Class 0 Serial Number: UCV1002567 Volume flow rate [m3/h]: 1,190 Output pressure [bar]: 7 – 10 Power [kW]: 90 Year of construction: 2014 Running hours [h]: – Weight [kg]: 2.210 Dimensions LxWxH [cm]: 310x160x235
Key data: 650 mm, 1300 mm, 1 U/min
Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump
1 Screw Extruder for Sale Brand: Maquiplast Diameter: 80 mm Ø L/D ratio: 20 L/D Engine: 30 kW (40 hp) Variable Speed Drive: Delta For more details or to make an enquiry, please contact us.
Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg
Key data: 75 1/min
This WEBER extruder is in machine storage at Plastima Used Machinery. The machine comes from 1997 and is in great condition. Brand: Hans Weber GmbH Model: NE 7 042 Type screw: single screw Year of construction: 1997 Screw Ø: 75mm Working hours: 58.668
1 of used capper for sports-caps, make Officine Ave, type TAR 8T Pick&Place, new 1997, operates from left to right. Used for 500 ml PET bottles.
Industrial Screwdriver Fein AS sd 715-1 Data Industrial Screwdriver - Stick Wrench ASsd 715-1 Fein Elektronik ASsd 715-1 With transformer 42 volts / 40 watts, 1.0 A, 1000 rpm, Right/Counterclockwise Rotation (only screws on pressure)
Key data: 260 mm, 520 mm, 16 U/min
mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...
Wabeco screwdriver with industrial screwdriver Fein AS sd 715-1 Industrial screwdriver: Fein AS sd 715-1 1000 rpm 42 V / 40 W / 1A Foot control by Hans Bernstein The hand lever is used to guide the industrial screwdriver upwards against the spring, hold the screw in position, release the lever and start the rotary movement with the foot switch. Due to the spring pressure and the dead weight, the screwdriving process is carried out without manual effort.
Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg
Key data: 30 m³/min, 7
Type: ZT 30 Year of Make: 2000 Power (kW): 30 Pressure (bar): 7.5 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; Electronics industry; Medical & Healthcare
Key data: 400 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,500 mm Width 1,700 mm Length 4,000 mm without tailstock Bed width 550 mm Bed height 800 mm Bed length 2,000 mm Face Plate Ø 900 mm Forkardt Chuck Ø 500 mm without tailstock, but can be placed Max. workpiece lengths without tailstock 1,500 mm Turning diameter over bed 800 mm Turning diameter over support 640 mm Center height 400 mm 6 pieces of baking 4-fold turning steel holder
Key data: 340 mm
Description Lead and pull spindle lathe VDF Boehringer Göppingen Details Height 1,400 mm Width 1,300 mm Length 4,150 mm Bed width 480 mm Bed height 850 mm Bed length 3,000 mm Face plate Ø 600 mm Forkardt Wedge Bar Chuck Ø 315 mm max. workpiece lengths 2,000 mm Turning diameter over bed 680 mm Turning diameter over support 480 mm Center height 340 mm Drive power 6.5 / 10 kW Lynette Ø 320 mm Multifix holder size C with 5 cassettes
Key data: 400 mm
Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets
Key data: 460 mm
Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added
ATLAS COPCO screw compressor mod. GA37 – CE compliant – used - 37 kw - 7.5 bar - 104 l/s - matr. AII 318838 - year 1995 - COMPLETE WITH MANUAL AND CE DECLARATION
Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
SPECIFICATIONS: Installed power 26 kW Maximum pressure: 13 bar Working pressure: 7 bar Hours: 460
Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg
Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg
Key data: 400 mm, 800 mm
For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA
Dosing screw conveyor BOSCHE 150 mm diameter Length 1.30 m Engine 1,5 kw 32 rpm right-hand thread, slope 110, at the outlet slope 150, Sliding Inlet 270 x 680 mm, outlet 170 x 170 mm Review and test run in our qualified workshop done Good condition
BÜHLER MWSB-100 dosing screw conveyor for weighing 100 mm diameter, length 2.75 m Engine 0.75 kw, rpm 107 Thread in the inlet progressive, inlet ø 390 mm, Outlet ø150 mm with pneumatic outlet Very good condition
Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New
Screw compressor Manufacturer: GHH Rand Model No.: CS80/3 Speed range: 2000 - 2950 Max. volume flow: 710 m³/h at max. working pressure 2.5 bar max power consumption 48kW The compressor is in good condition. Signs of use are present. for more details see pictures
maximum number of results exceeded
please refine your search
