127,589 used machines on RESALE, but how to find them? Machine Search
Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
14-speed mounting screwdriver AC, for cylinder head mounting etc. Next: 3 spindle assembly screwdriver AC 3 and 6-spindle screwdriver ATLAS-COPCO 2 spindle screwdriver AC 3 spindle assembly screwdriver SPS & AC 1 spindle assembly screwdriver SPS
Screws, hexagon head screws, socket head cap screws, Allen head screws -Size: M48 x 80 mm -Grade: A4 stainless steel Manufacturer: RS -Screws: 49 -Unit price: 9 EUR -Nuts: 48 -Unit price: 5 EUR -Total weight: 160 kg
Energy chain, cable drag chain -Manufacturer: igus -Type: 1880.10.12.BC -Type: 140020 B - Passage: 100 x 50 mm -Number: 10x screw-on bracket available -Price per piece
Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment via trapezoidal thread -Adjustment range: 295 - 530 mm Quantity: 1 piece -Weight: 9 kg
Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, -Adjustment: via trapezoidal thread -Adjustment range: 120 - 175 mm -Price: for all 2 pieces -Weight: 4 kg
Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...
Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable ...
Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: Rexroth -Type: 102553 -Type: 2492458 -Thread diameter: 48 mm -Thread pitch: 30 mm -Total length: 2285 mm -Weight: 34 kg
Ball screw with nut, transfer roller screw, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod Manufacturer: Rexroth Type: R150257086 -Type: 69115 40H -Thread diameter: 48 mm -Thread pitch, two-stage: 20 mm -Total length: 1995 mm -Weight: 26 kg
Screws and small part scoop Brand: Hammer Type: SKP-M-300 Other details: Please see photos All information without guarantee
Torque / angle / preload Analyzer Testing and measuring instrument Brand: Treasure Type: 5143-2012 G Other details: Please see photos All information without guarantee
Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...
Screw, hexagon screw, cylinder head screw, HV screw, fine thread screw -Size: M 30 x 2 -Quality: 10.9 -Manufacturer: Peiner -Quantity: 100 pieces screws available -Price per piece -Selection: other screws are also available -Weight: 0.8kg/pcs
Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...
Air ratchet wrench, impact wrench, air ratchet -Square: 10 mm -Length: 400 mm -Weight: 4 kg
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hex head screws: M20 x 170 73 Box of 10 pcs. -Quality: DIN 931 8.8 galvanized -Manufacturer: Reyher -Price: complete -Total weight: 381 kg
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon bolts: M 20 700 kg -Sizes/number: M16 x 30 to M16 x 130, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 627 kg
Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, -Hydraulic screw connection: size 2 1/2 -Type: 3000-2 1/2-76.1 A3L -Number: 15x hydraulic screw connection available -Price per piece -Total dimensions: 105/26/H114 mm -Weight: 1.2 kg/pc.
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hex head screws: M12 ca. 100 kg -Sizes/number: M12 x 30 to M12 x 140, see photo parts list -Grade: 8.8 Zinc Plated -Manufacturer: various -Price: complete -Total weight: 127 kg
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Wood Screws: Hex Head Wood Screws -Quality: DIN 571 galvanized steel -Sizes/number: M10 x 40 2080 pcs / M8 x 60 800 pcs -Manufacturer: Reyher/Diverse -Price: complete -Total weight: approx. 80 kg
Ball screw with nut, transroll screw, ball screw nut, lead screw, ball screw, linear bearing, precision ball screw, ball screw -Manufacturer: Blis, ball screw ball screw -Thread length: 1075 mm -Thread: Ø 25 mm / pitch 4 mm -Dimensions: see photos -Dimensions: Ø 70 X 1235 mm -Weight: 4.7 kg
Screw jack, screw jacks, clamping devices, Atlas screw jack, threaded screw jack, clamping tool, thread pad, -Adjustment via trapezoidal thread -Adjustment range: 375 - 605 mm -Quantity: 1 piece -Dimensions: 185/185/H375 mm -Weight: 19.3kg
Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Staff, screw jack -Type: Size 05 Version A -Useful stroke: 200 mm -Trapezoidal thread spindle: Ø 18 mm -Dimensions: 120/830/H315 mm -Weight: 2.2 kg
Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Screw jack: stroke 115 mm -Tooth rack Ø 30 mm -Spindle: Ø 24 mm -Dimensions: 770/270/H105mm -Weight: 9.2 kg
hammer drill, chisel hammer, combi hammer, Bosch hammer, cordless hammer drill -Manufacturer: Bauhaus Toolson, cordless drill type PRO-AS 18 Li-1 -incl.: charger and battery -Number: 4x drill drivers available -Price: per piece -Transport dimensions: 240/180/H240 mm -Total weight: 1.9 kg/piece
1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.
Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg
Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg
Knurled screw handwheel -Knurled screw: handwheel -Length: 100 to 163 mm -Thread: trapezoidal thread see photos -Dimensions: Ø 72 x 100 mm -Weight: 2.7 kg
Manufactured by Ryazan plant (Russia) Max. work piece diameter, mm 800 Max. work piece diameter above support, mm 450 Max. work piece length, mm 2800
running direction: right - left for 28 mm VacuVent closure with safety housing
Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h
No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)
Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill/drivers -Magazine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 screwdrivers available -Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece
Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill/drivers -Magazine screwdriver: for self-drilling screws, sheet metal screws -Suitcase -Total weight: 10 kg
Angle fitting, hydraulic fitting -Size: 28 L Packages: 4 -5 pieces: per package Price: per package -Weight: 3 kg
Screws, hexagon head screws, socket head cap screws, Allen head screws -various sizes - various grades: 4.6/5.6/8.8 -various manufacturers: Fuchs, Würth, Sisma, FS -Euro pallet: 1 -Weight including packaging: 340 kg
Screw clamps, pipe clamps, pipe fixings -Size: Ø 108 to Ø 114 mm Price: per package -Number: 4 packages available -Weight per package: 5 kg
Screw clamps, pipe clamps, pipe fixings -Size: Ø 40 mm -Price/Sale: complete -Package weight: 10 kg
Screw clamps, pipe clamps, pipe fixings -DN: 20/22 -DN: 25/28 -DN: 32/34 -DN: 40 -DN: 50/52 -DN: 65/70 Price: complete Package weight: 21.5 kg
Screw clamps with shaft, pipe clamps, pipe fastening -DN: 10/12 -DN: 20/22 -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Package weight: 11.5 kg
Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293
Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.
Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)
Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.
Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion
maximum number of results exceeded
please refine your search
100 € 
