screw pump used for sale

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 4 020 / 8 160 l/h Engine power: Level 1 1.0 (1.36) kW (PS) Level 2 1.9 (2.6) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 57 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 9 960 / 19 380 l/h Engine power: Level 1 2.5 (3.4) kW (PS) Level 2 4.2 (5.71) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 90 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 840 - 8 100 l/h Engine power 2.2 (3.0) kW (HP) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Screw vacuum pump Manufacturer: Busch Type: NX 450 A Suction capacity: 450 m ³/h Warranty: 12 months Includes: user manual, oil filling status: as good as new Delivery time: Please enquire; ready for operation

No.: 469543 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Screw pump, GR70-SMT16B-600L-AC-28B5G, Settima, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Please note: The unit was in use in a Frech die-casting machine for just 3 months and was installed for 1 year and is in an top condition. - Screw pump, Settima GR70-SMT16B-600L-AC-28B5G, Original price approx. € 4,100, Sales price € 2.100 excl. VAT. - Motor, 7.5 kW, 400 V, AC Motoren GmbH - Includes SAE rubber compensator from 2 1/2" to 3 1/2", stainless steel - Includes stainless steel SAE 2 1/2" connecting pipe Please note: We also sell the complete oil/water cooling system. If you are interested, please request the operating instructions or we would be happy t ...

The Kaeser ASV60 is a high-quality rotary screw vacuum pump designed for efficient and reliable vacuum generation in industrial applications. Engineered for continuous operation, this unit delivers stable vacuum performance with low energy consumption and minimal maintenance requirements. Built with robust components and advanced screw technology, the ASV60 ensures long service life and dependable operation even in demanding production environments. Key Features: Rotary screw vacuum pump technology Designed for continuous industrial operation High efficiency and energy-saving performance Low noise and vibration levels Reliable and low-maintenance design Integrated control system

Comm.: 63006828 Y.O.m.: 2012 Capacity: 8m3/h at 372 rpm 1.2m3/h at 63 rpm LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Excenter screw pump Make: Netzsch Type: NE 20A Speed-controlled gearbox (manufacturer: Stöber) Speed: 64-320 rpm Power: 0.55 kW at 1380 rpm Dimensions LWH: 1200 x 300 x 350 mm Weight: approx. 80 kg

Screw pump with motor, hydraulic pump SETTIMA GR 40-SMT16B 125LAC28 RF2 ( GR40-SMT16B125LAC28RF2 ) motor: 2.2 kW 1420 rpm 230 / 400 V Dimension: 800 x 250 x 300 mm

Screw pump with motor, lubrication pump ALLWEILER SEFR/BE20R38QW16 Q: 17 l/min (2900 rpm) Pmax: 50 bar for motor: 4 kW 400 / 690 V New ! Dimensions: 750 x 300 x 250 mm

Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30

Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8

Stock number: PM2076, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Inlet: Flange L 350 x W 180 mm., Motor: 1,5 kW - 220/380 Volt - 186 rpm., Theoretical capacity: 1000 l/h., Manufacturer: Seepex, Type: BT 2-12, Other: Screw feeding

Eccentric screw pump with 19 m³/h capacity Description: Operating pressure test: 6 bar Motor: 7.5 kW - With connections: suction side: flange DN 85, Print side: DN 100 - With chassis mobile, 2 swivels and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 1200 mm Width: 410 mm Height: 1000 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost. Connections can be changed at an additional cost.

Stock number: PM2079, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SMH60 D8

Stock number: PM2078, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: MH60 D8/B

Stock number: PM1576, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Dimensions: L 1050 x W 250 x H 330 mm., Motor: 2,2 kW - 220/380 Volt - 1400 rpm., Theoretical capacity: 7000 l/h, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 40 mm., Dimensions outlet: Ø 40 mm., Manufacturer: Mono, Type: SH40A8

Triple screw pump, centrifugal pump, high pressure pump, centrifugal pump, lubricating oil/oil pump, triple screw pump -Manufacturer: Allweiler, screw pump type SPF40R54U8.3-W20 with hose package -Flow rate: 3.4 l/min -Pressure: 3 bar -Motor: 0.7 kW / 1800 rpm -Hose package: length 1x 60 m / 1x 6 m -Dimensions: 1230/900/H960 mm -Weight: 160 kg

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Stock number: PM1577, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Motor: 2,2 kW - 163-975 rpm., Theoretical capacity: Max 4500 l/h, Dimensions: L 1300 x W 300 x H 550 mm., Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SH40R8

Stock number: PM1524, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Motor: 1,1 kW, Theoretical capacity: 3500 l/h., Manufacturer: Mono, Type: SJ 500

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, hopper pump, eccentric spindle pump -Electric motor: Nord 3.0 kW -Transmission: Nord SK25-100LA/4 TF -Speed: 105 rpm -Pipe connection diameter: DN 80 -Quantity: 3 eccentric screw pumps available -Price: per piece -Dimensions: 1810/200/H300 mm -Weight: 107 kg/piece

Stock number: PM1575, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a foundation, Dimensions: L 1150 x B 350 x H 400 mm., Motor: 1,5 kW - 220/380 Volt - 700 rpm., Theoretical capacity: 3000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: SH40

Wangen Twin NG70 Screw Pump 2022, Stainless, designed to reliably pump low to high viscous, volatile or gaseous products and for applications where maximum hygiene and efficiency is required. The hygienic pump for food and beverages, chemicals and cosmetics. With touch screen HMI screen controls, all on mobile stainless skid, 3Ph

Manufacturer: ALLWEILER GmbH Type: SNH40ER38U8 9W22 Serial Number: 25060979 Flow rate: 63.7 l/min Speed: 2900 rpm Viscosity: 134.9 mm²/s Differential pressure: 2.5 bar Pressure head: 38 m Power: 3.75 kW Nominal Diameter: DN 40 (1 1/2\") Year: 2024 Auction-ID: A1-49997-14

Pipe screw, cement screw used without motor for the conveyance of cement or similar materials with directly attached bearings Total length: 6520 mm Screw aisle length: 6130 mm Screw aisle: 210 mm Shaft of 80 mm, slope progressive at the inlet Opening opposite the driven side: inside 210, flange 280 mm Opening 1 driven side: 250 mm Opening 2 (with lid) diameter: 200 mm Matching motor and overhaul can be offered optionally. Drive via flange motor with coupling

A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

A complete unit is offered.

On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Pneumatic screwdriver, pneumatic screwdriver DESOUTTERDrück air screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4QDreh torque range: 0.6-14.0 NmSpeed: max. 510 rpm. Compressed air requirement: 6 barAir consumption: 8.7 l/sBit input: M6- rotary switch for clockwise and counterclockwise rotation (rotary ring control)- without screwdriver shutdown- compressed air control cable 4 mm- compressed air connection for screwdriver function min. 10 mm- Aluminum bracket for handling device- Screw feeder 12 mm (inner diameter)Dimensions L x W x H

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Screws, hex bolts, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hex bolts/cylinder bolts: M10 stainless steel 330 kg -Hexagonal screws: DIN 933 M10 x 100 300 pcs / M10 x 20 4400 pcs -Cylinder head screws: DIN 912 M8 x 35 6600 pcs / M8 x 30 4200 pcs -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg

Screws, hexagon screws, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hexagonal screws/cylinder head screws:M16 / M20 730 kg -Hexagon screws: DIN 931 8.8 M20 x 60 250 pieces / M20 x 55 DIN 933 8.8 4400 pieces. -Hexagon screws: DIN 931 8.8 M16 x 50/22 150 ST -U-washers: Ø 21.0 mm DIN 125 Form B 2100 pcs. -Price: complete -Transport dimensions: 1200/800/H440 mm -Total weight: 730 kg

Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available -Price: per piece -Dimensions: 2090/5460/H2180 mm -Weight: 2180 kg

A used replacement stage type VML 60 is offered, see pictures. The compressor stage is in very good condition, see pictures. If you have any questions, please feel free to contact us.

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Large set of screws and fasteners composed of several hundred metal parts of various sizes. The contents include bolts, screws, threaded rods, washers and fastening accessories stored in various trays and bags. This set is ideally suited for workshops, maintenance departments, tradesmen, assembly companies, machine manufacturers or hardware dealers. Sale in a single lot with visible content in the photographs. Auction-ID: A1-48554-265

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Piston dosing pump, type EK 1 H, with batch control via electric pulse preselection counter incl. remote summier movement. Working pressure 7.5 bar, max dosing current 290 l./h, pipe connection Rd 34 x 1/8 inch with hose sleeve NW 15, with control cabinet, mounted on table.

Stainless steel pumps, Hilge, Fristam, various versions and sizes

Cat-nr. 13-0211 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 4,0 bar capacity: 1.500 litres/h Motor: 0,55 kW Connection: inlet/outlet: DN 40 according to DIN 32676 - can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Height: 73 cm Length: 141 cm Width/Depth: 45 cm Weight: 56 kg The pump is tested; 100% function guarantee! For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

Rietschle vacuum pump CLF 60V 60m3/h, 1400rpm, intake pressure 1 torr, 1.5 KW