screw production used for sale

Rotary screw air compressor oilfree Atlas Copco ZR 355 355 kw, 10,00 bar, 50,70 m3/min, with soft start

Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.

Air screw compressor Atlas Copco oel-free ZR 160 VSD FF 160 kW, 10.40 bar, water-mounted, with frequency inverter, with built-in adsorption dryer, volume flow 6.9 - 24.4 m3/min.

Rotray screw air compressor Atlas Copco oil-free ZR 160 VSD FF 160 kW, 10,40 bar, water cooled, variable speed drive. With built-in adsorption dryer. Volume flow 6,9 - 24,4 m3/min.

Air screw compressor Atlas Copco oel-free ZT 250 250 kW, 7.5 bar, volume flow 42.10 m3/min oel-free, air-cooled

Rotary screw air compressor Atlas Copco ZT 250 oil-free 250 kW, 7,5 bar, Volume flow 42,10 m3/min. oil-free, air cooled

The WALTER SF 37 KS screw compressor was manufactured in 2014 by the WALTER Kompressortechnik brand. The freestanding screw compressor has direct drive and built-in inverter. The compressor is offered as a set with a 3000 dm3 vertical expansion tank and WDFC 396 refrigeration dryer, with an integrated control panel and a built-in filter 1 and 0.01 u. Technical parameters of the screw compressor: - pressure: 10 bar - capacity: 5.8 m3 / min - power: 37 kW - connection: R 1 1/4 " - volume: 71 db (A) - weight: 715 kg - length: 1575 mm - width: 1030 mm - height: 1750 mm Technical data of the refrigeration dryer: - capacity: 396 m3 / h - capacity: 6.6 m3 / min - connection: 2 " - voltage: 230/1/50 V - refrigerant: R134.a - pressure drop: 120 mbar - working pressure: 16 - built-in 2 micron filters: 1 and 0.01 - dehumidifier weight: 120 kg - length: 750 mm - width: 700  ...

System: eccentric screw pump Manufacturer: REWA Type: R20-2 Year: 2014 Flow rate: 0.8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 1.5 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber Condition: The pump has no hours of operation and is as good as new

REWA R35-2 Product no.: RE-HU-2015-0901-PEC2 System: eccentric screw pump Manufacturer: REWA Type: R35-2 Year: 2014 Flow rate: 8 m ³/h Pressure: 12 bar Speed: 960 rpm Motor: 4 kW / adjustable Other: hopper Material: Main body steel Shaft: Stainless steel Stator: Stainless steel Rotor: Stainless steel Shaft seal: Rubber

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Tip height: 107 mm top width: 350 mm circular diameter: bed 200 mm spindle bore: 25 mm taper tailstock: 2 MK spindle speed: 35 - 3500 rpm feeds: longitudinal and mm/U thread pitches plan: 0.2-3 mm electrical connection: 380 V, approx. 2.2 kW space: 600 x 1300 x 1230 mm weight: 850 kg

Compressed air screw compressor oil-free Atlas Copco ZR 400 400 kW, 10 bar, 56.3 m3/min

Rotary screw air compressor Atlas Copco ZR 400 oil-free 400 kW, 10 bar, 56,3 m³/min

Normal steel Volume: 25 litres, drive: 3 kW

Pipe conveyor screw with 270 mm diameter and 5,200 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral rise: 125 mm.

Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.

Pipe conveyor screw with 270 mm diameter and 5,000 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.

Compressed air screw compressor Kaeser DSD 238 T 132 kW, 12 Bar, 19.92 m3/min

Pipe conveyor screw with 270 mm diameter and 2,900 mm conveyor length (measured from center inlet to middle outlet). Drive 5.5 kW via intermediate gearboxes of gearbox construction north and claw coupling. Tree speed: 49 UPM; Spiral pitch: 130 mm.

Rotary screw air compressor Kaeser DSD 238 T 132 kW, 12 Bar, 19,92 m3/min

Tube-type screw conveyor with 270 mm diameter and 5.200 mm conveying length (measurement taken between center input and center output). 5,5 kW drive via gearbox by Getriebebau Nord and jaw clutch. Shaft speed: 49 RPM; helix ascension: 125 mm.

Tube-type screw conveyor with 270 mm diameter and 2.900 mm conveying length (measurement taken between center input and center output). 5,5 kW drive via gearbox by Getriebebau Nord and jaw clutch. Shaft speed: 49 RPM; helix ascension: 130 mm.

Stainless steel screw conveyor with 250 mm diameter and 2.100 mm conveying length (measurement taken between center inlet and center outlet), inlet and outlet 270 mm Ø each, incl. drive via gearbox and jaw clutch.

Screw caper heads d 28 aluminium from SIMONAZZI filler

with 12 closing heads for top caps (Piccolo plastic caps) running direction: left - right

Air Screw Compressor Atlas Copco GA 110 110 kW, 7.5 bar, 20.50 m3/min

Rotary screw air compressor Atlas Copco GA 110 110 kW, 7,5 bar, 20,50 m3/min

Air Screw Compressor Atlas Copco ZR 160 VSD Oil-free 160 kW, 10.40 bar, 23.60 m3/min

Rotary screw air compressor Atlas Copco ZR 160 VSD oil-free 160 kW, 10,40 bar, 23,60 m3/min

Air Screw Compressor Atlas Copco ZR 160 VSD Oil-free 160 kW, 10.40 bar, 23.60 m3/min

Rotary screw air compressor Atlas Copco ZR 160 VSD oil-free 160 kW, 10,40 bar, 23,60 m3/min

Air Screw Compressor Atlas Copco GA 250 FF 250 kW, 8.20 bar, 41.70 m3/min

Rotary screw air compressor Atlas Copco GA 250 FF 250 kW, 8,20 bar, 41,70 m3/min

Compressed air screw compressor Kaeser DSD 238 132 kW, 8.50 bar, 23.80 m3/min

Rotary screw air compressor Kaeser DSD 238 132 kW, 8,50 bar, 23,80 m3/min

Compressed air screw compressor Kaeser DSD 238 132 kW, 8.50 bar, 23.80 m3/min

Rotary screw air compressor Kaeser DSD 238 132 kW, 8,50 bar, 23,80 m3/min

Rotary screw air compressor Kaeser DSD 238 132 kW, 8,50 bar, 23,80 m3/min

Compressed air screw compressor Kaeser ESD 441 SFC 250 kW, 8.50 bar, 40.50 m3/min

Rotary screw air compressor Kaeser ESD 441 SFC 250 kW, 8,50 bar, 40,50 m3/min

We are very pleased to offer one full 40` container (FCL) containing the following compressors: Make Model Atlas Copco 1xGA 110 Atlas Copco 1xGA 75 Kaeser 1xCS 75 Kaeser 1xAS 30 Kaeser 1xBS 50 Kaeser 1xBS 60 Atlas Copco 1xGA 30 Atlas Copco 1xGA 15 Atlas Copco 3xGA 22 Kaeser 5xAS 35 For more details please contact us.

Compressed air screw compressor Kaeser ESD 351 200 kW, 12 bar, 30.30 m3/min

Rotary screw air compressor Kaeser ESD 351 200 kW, 12 bar, 30,30 m3/min

Compressed air screw compressor Kaeser FSD 571 315 kW, 12 bar, 46.40 m3/min

Rotary screw air compressor Kaeser FSD 571 315 kW, 12 bar, 46,40 m3/min

Screw trough approx. 2,800 x 660 mm, screw diameter: 370 mm, 2-cylinder solids pump SP2180-400, capacity 8 cbm/h, with a distribution station and hydraulic unit with 55 kW

Air Screw Compressor Atlas Copco ZR 160 VSD Oil-free 160 kW, 10.4 bar, 23.6 m3 rpm

Cooling principle: water cooling (for drying pasty solids), capacity: 4,0 cbm/h, trough length: between 6,7 and 7.9 m, screw diameter: 400 mm, cooling jacket diameter: 560 mm, double-walled, wall thickness trough: 5 mm, helical geared motor 4 kW, conveyor trough coat, cooling shroud, front plates, Auger and Auger blades made of V2A steel

Rotary screw air compressor Atlas Copco ZR 160 VSD oilfree 160 kW, 10,4 bar, 23,6 m3/min