screw presses used for sale

Briquette press with extraction system Make Mütek Type MPP60 Year of construction 2011 Briquette mould cylindrical Diameter 50 mm Depending on the material, capacity up to 60 kg/h Drive motor 5.5 kW Volume of chip hopper approx. 0.7 m³ Weight of the press 680 kg Dimensions briquette press 1680 mm x 1100 mm x 1500 mm Height with container 2050 mm Including extraction system 33 filters, filter length 1300 mm, diameter 200 mm Extraction system filter area 27 m² Capacity 2,970 m³/h Fan motor power 5.5 kW Intake diameter 300 mm Overall dimensions with extraction system and fan 4300 mm x 1150 mm x height 3700 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, mal ...

very fast Eccentric press, make SCHULER , tested , electrically connected Type PDv 25/200 Masch.-No. 70/32.0610/9 Technical data: Power 25 to Number of strokes approx. 180 /min Extension 200 mm Impact stroke 8 - 80 mm Shock sift creation approx. 60 mm Table size approx. 570 x 410 mm Installation height approx. 310 mm (measured with mounted clamping plate) Width x Depth approx. 1.1 x 1.35 m plus control cabinet Height approx. 2.15 m Engine power 3 kW Weight estimated approx. 1.5 to

Veneer Press Gluing Press Plate Press Heat Press OTT Type: JU 65 YOC 1977 Press dimensions : 120 x 225 cm incl. heating plates The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance for more detailed cond ...

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

1 MONTI ANTONIO continuous belt press for knitted fabric ironing/finishing, with steaming upper plate type 205

FETTE TABLET PRESS, MODEL P3100 Year of construction: 1992 55 station rotary double sided tablet press. Designed for high volume production of a wide range of tablets with an output of up to 594,000 tablets per hour. Machine size: 1650mm x 1600mm x 2900mm height (with vacuum units fitted, or 2000mm high without them) Approx. weight: 3,750kg Key information: - Punch/Die type EU-BB - Maximum fill depth: 18mm - Upper punch entry: 2mm – 6mm - Maximum tablet diameter: 13mm - Maximum tablet thickness: 8.5mm - Initial compression force: 20kN (2 ton) - Maximum compact force: 100 kN (10 ton) - Die plate speed: 15-90 rpm - Fitted with 20kN (2 ton) pre-compression station - Upper punch body lubrication and keyed upper punch bores - Variable frequency drive - Two Stainless Steel PIAB vacuum conveyors mounted on the top of the machine for delivering bulk product - Emer ...

Manesty Drycota 900 23 Station Double Headed Tablet Press with Type D Tooling • This Double Headed Tablet Press is Mounted on a Common Chassis Plate and Driven via Line Shaft by a Common Drive • Twin Single Compression • Turrets Are Each Fitted With 23 Type D Stations • Upper Keyed Tooling • Removed Side Attached Operation Control Panel N°. of Stations: 23 Voltage: 400 VOLTS Frequency: 50 HERTZ Phase: 3

Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. El schematics included. Packing and loading included. Feeding device not included, if needed contact for more information.

Rotation tablet press SPT-TP 400 with high production capacity; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 400 Number of stations (Max.) D=30 B=36 BB=45 1 Max tablet ejection/hour T/h 125000 170 000 215 000 2 Max.Tab.Diameter Round mm 13 16 25 Mould mm 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 5 Max pre-press force t 2 Hqgonxsno 6 Dimensions mm 1000 x 1230 x 2000

Rotary tablet press SPT- TP500D with double-sided press; Brvyulnw 2 layered production; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 500D Number of stations (Max.) D=41 B=49 BB=59 1 Max tablet ejection (two-sided) T/h 270 000 360 000 420 000 Max tablet ejection 2 layer T/h 90 000 115 000 140 000 2 Max.Tab.Diameter Round mm 13 16 25 Form 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 6 Dimensions mm 1150 x 1550 x 1950

Key data: 50 t, 2000 mm

Machine Type: Press Brake Manufacturer: Promecam Type: 50x2 Condition: used / functional Offer will only be sent if a complete imprint is provided! Price 5.650 Euro incl. 19% VAT ex stock Warstein Location Warstein , Germany Reference M-PRO-0923 DESCRIPTION We offer you a used press brake from the manufacturer Promecam. Specifications Bending force 50t Bending length 2m Weight approx. 3.2t No tools required Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705

Stainless steel pedestal for bread presses / dough-sharing machines suitable for all common bread presses massive construction resilient with 1 to easy lifting with the lift truck Stainless steel for optimal cleaning Dimensions: 735 x 640 x 170 mm, WxDxH Visit our large bakery machinery warehouse!

Code: 0229 Brand: POR Model: A 100N - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard With covered suction filtering battery ASPIR MECC AM B/64 CS - CE Standard Technical data Briquette diameter mm 65 Max briquette length mm 50/300 Output m3/h 1,454 Motor Hp 10 Drum diameter mm 1200 Pump lt 50 Level sensor Inspection door Cooling unit Overall dimensions mm 2115 x 1350 x 1700 h Weight kg 1000 Covered suction filtering battery SPIR MECC AM B/64 CS - CE Standard - with 64 filtering tubes Flow rate m3/h 8500 Power Kw 0,18 Round attach with connecting flange Overall dimensions mm 2100 x 2100 x 2800 h Weight kg 650

(analogue of KB8344) Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Veneer press Leopida Format: 2300 x 1000 mm Plates with hot water heating L x W x H: 2300 x 1100 x 2000 mm Weight approx. 2000 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Used Goodnature cold press, model X-1. Year of production 2014. Capacity up to 1,000 bottles per day. Power supply 220V 50Hz X-1 is a professional press capable of producing a thousand bottles of cold-pressed juice per day. X-1 is used by successful cold-pressed juice producers, nut milk producers and cider producers. The machine is almost unused. She worked several times. The bags have been the same since new - they show minimal wear. It's like brand new. Everything works fine without any problems. Perfect machine for small juice producers, large grocery stores or juice shops. It can also work in the production of nut milk or cider. The machine is very easy to clean and maintain. Comes with 3 different shredding discs and 2 bags. Original user manual. The juice is squeezed gently but firmly. The operator sets the pressure and controls the time. It can work fast with lower effi ...

Machine type: Eccentric press Manufacturer: GRÖTZINGER Model: 15 t Built: 1965 Condition: good Offer type: used machine Technical data: Pressure force: 15.0 t Extension: 120 mm Table: 460 x 255 mm Installation height: 250 mm Drive: 1.6 kW Remark: infinitely variable speed adjustment Weight: 750 kg The machine is in a good and ready-to-use condition and can be visited and demonstrated by us. We would be happy if our offer finds your interest.

Dough part and actuator, Bread press Model: 4-30 NEW mature technology ... the original! Knife with simple cleaning position! Dough divider semi-automatic with 3 actuating plates Dough ring coated with easy click Sub range 40 to 120 grams/piece Division 30 in part Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Press force: 300 t Stroke length: 200 mm Stroke speed: 20-60 1/min Shut height: 680 mm Ram adjustment: 200 mm Overall size: 2600x2000x4200 mm

Overall Size: 1400x1300x2300 mm Work space: 200x200x150 mm

Overall size: 900x900x1800 mm Stroke length: 80 mm Weight: 702 kg The machine used for electric motor coal/carbon brush pressin

spare parts - cook bolinders - Hydraulic cylinder PRESSING Hydraulic cylinder pressEN

Ortlinghaus coupling outer diameter 680 mm from stock as good as new

Crank press ZAMECH PKRR 400A built in 1974. Technical data : - pressure: 400 tons - clearance between stands: 1020 mm - ram stroke: 315 mm - number of strokes per minute: 20 - maximum distance of the slider from the table closed: 742.5 mm - slider adjustment: 250 mm - table dimensions: 1020 x 1050 mm - main engine power: 40 kW - main engine revolutions: 1500 1 / min. - weight of the press: 40 t

Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t

Briquette Press Briquetting Press Chip Press Pressing unit without feed auger/hopper WEIMA TYPE: TH500 Briquette diameter approx. 50 mm Hydraulic engine power 7.5 KW Pressing capacity approx. 800 Kg/h Here you bid on the complete press including control without feed screw and bunker. Machine was connected and test run, pump and cycle work perfectly. Wiring diagram is also available. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, All information subject to change. The machines can be picked up by yourself or shipped by freight forwarder at the expense of the buyer. Loading or packing can be organized by us. The shipping costs are a guideline, depending on the distance and unloading option they may vary, please inquire.

No. 4105: 1 gebr. Hydraulic riypress Fabr. G + K, type SI 40/50, Bauj. 2000 Accessories: Table 500 x 400 mm Other: Pressure force max. 600 kN Impact stroke 150 mm Weight approx. 4500 kg

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg

Bookpress / twin plates / Hydraulic Splek Model IIB Year 1975 Size 280 x 440 mm Stack height 600 mm Pressure 3 tons Available Direct

Manufacturer LOIRE SAFE Model ESSC 300/ 30-20 / 20-15 Year 2003 Press Maximum adjustable force 300 a 3.000 kN Return force 600 kN Max opening between fixed table and chuck 2.000 mm. Mobile chuck travel 1.500 mm. Dimensions of the lower mobile table Fontal 3.000 mm. Lateral 2.000 mm. Dimensions of the mobile chuck Frontal 3.000 mm. Lateral 2.000 mm. Machine weight without tools or accessories 63.000 kg. Speeds Approaching speed, without pressure 60 mm/s Working speed, adjustable by potentiometer 1 a 7 mm/s Demoulding speed, adjustable by potentiometer 1 a 35 mm/s Return speed 60 mm/s Tooling Dimensions Frontal 3.000 mm. Lateral 2.000 mm. Height 1.500 mm. Max weight Mobile part 18.000 kg Total 42.000 kg Accessories Upper plate with tilt system INCLUDED Movable lower table with tilt system INCLUDED Stop time and safety distance Stop time 123 ms Safety  ...

2886: 1 gebr. Difiting press 200 kN Fabr. REIS, type TUS 60 OK 20, Bauj. 1991 with hydr. Control Arb.-Ber.: Stroke approx. 700 mm, drive power: 7.5 kW Accessories: extendable table 670 x 570 mm, swing-out top plate 670 x 570 mm, Mounting height 740 mm Other: Passage between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 tons. very good condition

Vertical baler HSM 155.2 VL, built in 2003 Specifications: Manufacturer: HSM Type: 155.2 VL Year of construction: 2003 Press force: 16 t Drive power: 4 kW Filling opening: 1100 x 590 mm Filling height: 730 mm Press box dimensions: 1100 x 700 x 1130 mm (WxDxH) Bale size: approx. 1100 x 700 x 700-1000 mm Capacity per hour: approx. 4-8 bales Theor. Idle cycle time: 24 s Dimensions: 1400 x 1200 x 2300 mm (WxDxH) Weight: 1300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

No. 3421: 1 gebr. Tool press Fabr. SCHÖN, type SH-PZ 250, Bauj. 1979 Arb.-Ber.: Pressure power 250 to mm, drive power: .22 kW Accessories: Table 500 x 500 Other: Single stroke 2-hand Single stroke foot switch automatic continuous running set up and tap

Vertical baler HSM VL 500.2, built in 2007 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2007 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Filter press plate filter ultrafiltration plate filter used Manufacturer: Rhone Poulenc Type: UFP 70 Max working pressure: 4.5 bar/64 psi Torque: 8 mxkg 6x24 plates approx. 2000 x 600 H 1700 mm Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

2 column hydraulic press #5232 Press force: 200 t upper stroke: 500 mm lower stroke: 200 mm overall dimension: 1800x2200x3700 mm Power: 10 PS Weight: 8.4 t

N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.

Baler Presto CC 20 M, built in 2019, baling force 20 t, with restraint device Specifications: Manufacturer: Presto Type: CC 20 M Year of construction: 2016 Press force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 4-ply, tape, manual Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, w ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

Code: 0252 Brand: COLOMBO Model: 13/8 Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973