We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,104 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
AYEL-TECH WORKSHOP PRESS TYPE WPB 30 -Capaciteit 30 ton -Cilinderslag 600 mm -Werkbreedte 700 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width with additi ...
used
used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width wit ...
used
Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right
used
various hand spindle presses small More: Foot pendulum press Jantsch
used
Machine cleaned by a specialist & functionally tested Properties: + Partial knife made of stainless steel + even division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swiveled to the side) + easy and quick adjustment of the effective chamber height STANDARD equipment: + 3 knitting plates included Technical data, according to manufacturer's specifications: Quantity: 30 pieces of dough Unit weight: 30 - 93 grams (depending on dough / product) Dough insert: 900 - 2,800 grams (depending on dough / product) Power: 0.55 kW Powers: 400V - 3Ph - 50Hz Fuse: 16A-CEE plug Dimensions: 63 x 59 x 134 cm (WxDxH) Working height: 81 cm Height with lever: 202 cm Net weight: 250 kg
used
Manufacturer: BERGMANN Type: PS 8100 machine Height: 2200 mm Machine width: 1,200 mm Machine depth: 1,625 mm charging height 1900 mm Machine weight: 800 kg engine rated current at 400 V 3.0 Rated current converter 230 volts Motor power: 0.38 2 2 kW Required fuse: 10 A, 13 rpm protection: IP 54 (D), (E) Fire hydraulic oil: HLP 32 Bale weight: 150-400 kg capacitance: 1 m3; ready for use
used
Machine Mechanics & electrics completely overhauled & repainted by an expert 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + with effective cut-off + Cleaning position to the rear with hand crank + even division of the dough, excellent rounding of the dough pieces + Partial knife / cutter head has been overhauled / recoated + Machine was completely disassembled, mechanically & electrically overhauled, repainted + Transmission parts run constantly in an oil bath + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested with dough by master baker Standard equipment: + incl. 3x knitting plate, new Special equipment, available at extra cost: + Chassis for Fortuna Automat ...
used
Roll press / dough dividing and warp knitting machine / Klievmaschine Machine Mechanics completely overhauled & repainted by the expert New installation of the entire electrical system, according to the latest standards 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + Cleaning position electric, to the rear, with switch + even division of the dough, excellent rounding of the dough pieces + equipped with active cut-off, for square dough pieces + Partial knife / cutter head has been overhauled / recoated + completely disassembled, mechanically overhauled, repainted + New installation of the entire electrical system, according to the latest standards + Transmission parts run constantly in an oil bath + complete overhaul in Babenhausen, according to German quality stand ...
used
To force 80 Bending length 2100 mm with 3-point bending system . Installation height 782 mm Working stroke 265 mm . Rapid traverse 150 mm Step 10 mm Power 13 kW To machine weight 7,8 . with -3-point bending system -hydraulic tool clamping -sliding conditions -SICK photoelectric -6-axes stop system -many tools . . Control repair needed! Details on sale!
used
ZM press Max ram adjustment: 400 mm Passage between uprights: 800 mm Max distance between table - ram: 500 mm
used
PONAR ŻYWIEC PHM 160 D hydraulic press manufactured in Poland in 1990 is used for machining metal and processing plastics (e.g. polofen or melamine) or rubber. The machine characterised by its high reliability, performs precise machining with a force of 160 tonnes in manual mode as well as in semi-automatic or automatic mode, thanks to its being equipped with time relays. The gantry press is also equipped with, among others, a hydraulic ejector with a force of 60 tonnes and two temperature controllers for the upper and lower parts of the heating plate. The offered machine was purchased from the university and has never worked during typical production. The total weight of the machine is 4000 kg. Technical parameters of the PONAR ŻYWIEC PHM 160 D press - maximum pressing force: 160 t (1600 kN) - ejector force: 60 t (600 kN) - working table surface (L x W): 800 x 800 mm - pressing ...
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109138 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 30 S Year of construction: 2009 Serial No.: 109139 specifications: Pressing force: 30 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Height from the ground: 1,310 mm Bale size: 1,200 x 800 x 800 - 1,100 mm Bale weight: up to 270 - 360 kg Drive power: 7.5 kW Cycle time: approx. 29 sec. Pressing time: approx. 14 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)
used
AYEL-TECH WORKSHOP PRESS TYPE WPM 10 -Capaciteit 10 ton -Werkbreedte 500 mm -Hand mat-bedienbaar -Pressure gauge PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Press Erfurt Model: PKZZ-III-250-1FS YOM: 1980 Press capacity: 250 ton Table size: 2500 x 1250 mm – slidding table Slide size: 2500 x 1250 mm Slide stroke: 400 mm Max. height of the tool. Position slider SDAU: 954 mm Min. height of the tool. Position slider SDAD: 715 mm Slide adjustment: 250 mm SPM 25 Cushion drawing: operates
used
Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Hydraulic Press SCHULER HYDRAP 315 Manufacturer: SCHULER Model: HPDZb 3150-3000/1300 New in: 2001 Condition: Very good Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm
used
Mechanical Press KAISER 250 TON. Model: V 250 WR/2340 Condition: good, complete Technical details: Force: 250 T Dimensioni piano: 2000x1200 mm Dimensioni slitta: 2000x1200 mm Slide travel: 280 mm Slide adjustment: 150 mm Mold heigh: 495 mm Number of strokes: 15-60 per mimute
Mechanical Press KAISER 315 TON. Model: V 315 WR/2340 Condition: good, complete Technical details: Force: 315 T Dimensioni piano: 2280x1250 mm Slide size: 2000x1200 mm Slide travel: 280 mm Slide adjustment: 150 mm Mold heigh: 500 mm Number of strokes: 20-60 per mimute
used
Transfer press KRUPP PST-A 160 built in 1980. Technical data of the KRUPP PST-A 160 press: - nominal pressure: 160 tons - cutting force grade 1: 400 KN - force between stands: 1200 KN - number of working steps including cutting stage: 11 - distance between stands: 200 mm - slider stroke: 210 mm - drawing depth: 70 mm - range of jumps, infinitely adjustable: 15-75 / min. - production range of jumps with repeatability of its setting: 25-75 / min. - number of actuation movements: 15-25 / min. - a usable work resource for a jump in the range of 25-75 strokes per minute. : 20,000 J - maximum load on a single step: 500 KN - maximum load of a single step using inserts: 630 KN - maximum width of the tape: approx. 340 mm - maximum diameter of the cut: 120 mm - minimum diameter of the pattern: 30 mm - distance between stands: 2450 mm - height of tool building at the lower posi ...
used
HOT PRESS Type KOLMAG useful size mm. 3000 x 1300 open mm. 450 n.06 cylinders volt. 380/50 weight : kgs. 4000 heating plan by water
used
AYEL-TECH WORKSHOP PRESS TYPE WPS 100 -Capaciteit 100 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Technical data: -Compressive force 100 t -Throat 320 mm -Wide stand below the Guide 400 mm -Table size approx. 850 x 610 mm -Discontinued diarrhea hole in the table 335 / 300 mm -thickness of the table clamping plate 90 mm -gr. Height approx. 300 mm -Plunger area 600 x 335 mm -Adjustable height of the RAM 80 mm -Stroke adjustment 10-130 mm -Emissions er hub in the RAM 32 mm -Speed continuous operation approx. 56 / min -Drive 400 V / 11 kW -Space requirement approx. B H 1900 x 2800 X 2200 mm -Weight approx. 9000 kg Starring:-UVV press backup controller PREVENTA -Hydr. + pneumatically actuated clutch -LUTEX auxiliary braking system -Central lubrication
used
AYEL-TECH WORKSHOP PRESS TYPE WPS 60 -Capaciteit 60 ton -Cilinderslag 400 mm -Werkbreedte 1000 mm -Verplaatsbaar cilinder is -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Technical data: -maximum pressing force 40 t -maximum piston stroke 218 mm -Height 410 mm -Projection up to mid slide 280 / 370 mm -Table size 650 x 520 mm -Plunger surface 500 x 400 mm -StöÃ?elboaufnahme DIN 810 50 mm -Work speed max.bis 226kN 39 mm / s -Min. working speed 21 mm / s -Eilabsenkgeschwindigkeit 428 mm / s -Rear hub speed min. / max. 100 / 420 mm / s -Table height above floor 820 mm -Oil quantity approx. 400 ltr -Drive 400 V / 15 kW -Space requirement approx. B 1400 x H 3200 X 2200 mm -Weight approx. 7000 kg -with: - hydr. PIN voltage -Control CNC 50 - separate control panel
used
SAY MAK WORKSHOP PRESS TYPE SHP 250 -Cilinderslag 400 mm -Werkbreedte 1200 x 450 mm -Verplaatsbaar cilinder is -Pressure gauge -Met V-Blokken -Noodstop -Weight 2250 kg -Power 7.5 kVA -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Used pneumatic press 4 KN -Pressing force 4 KN (0.4 to) -Pneumatic cylinder make Festo -Pneumatic two-hand control - press plate made in 4 Guide pillars -Work surface between guide columns 200 220 mm -Machine table made of aluminium profiles and PA plate 600 600 60 mm -3-sided walls from Plexiglas -Total weight approx. 70 kg Suitable for stamping or embossing tools or plate bonding.
used
Technical data: -maximum pressing force 40 t -maximum piston stroke 500 mm -Hoisting speed 0-40 mm / s -Return 0-200 m / min -Mounting height 750 mm -Projection up to mid slide 360 mm -Slide clamping surface 440 x 360 mm -Slide clamping pins 40 mm -Table size 630 x 500 mm -Table hole / breakthrough 200 mm -Table height above floor 710 mm -Oil quantity approx. 300 ltr -Drive 400 V / 4 kW -Space requirement approx. B H 1200 x 2800 X 1600 mm -Weight approx. 2500 kg
used
I sell several machines, equipment here. spare parts, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts for forklifts and work platforms. Therefore, be sure to check out my other auctions Briquette press briquetting press chip press Pressing unit without control WEIMA TYPE: TH50 Briquette diameter approx. 50 mm Motor power hydraulics 5.5 KW They only bid on the briquette unit incl. hydraulic power unit. there is no control. I still have a control for briquette press with LOGO module. This can be purchased at an additional cost. The power unit could not be tested. Will be sold as it says here. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The ma ...
used
Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834
used
Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober
used
AYEL-TECH WORKSHOP PRESS TYPE WP 30 -Capaciteit 30 ton -Werkbreedte 700 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Baler Presto HPK 50 HS (HPK 750 H), year of manufacture 2013 Manafacture: Presto Type: HPK 50 HS (HPK 750 H) Year of construction: 2013 Hours: 3788 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without guarantee and guarantee.
new
Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.
used
Description Brand ESMACH Model FOR 3C ID 7256 Status Active Year of manufacture 2006 Location Oradea (RO) Moulder for rolled bread ESMACH FOR 3C manufactured in 2006, with 3 cylinders pre-arranged for manual loading with chute for pieces return. Double anti-waste device, adjustable through micro-metric steering, enabling two pieces to be processed simultaneously, stop device for the upper belt, output performance: 20 to 1200 g. ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.
new
UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 100 -Capaciteit 100 ton -Max druk pomp 32 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 1000 mm -Panel afmeting 500 x 1000 mm -Afmetingen 1500 x 700 x 1820 mm -Weight 1200 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
used
Spindle press Reissmann AG Saalfeld-Saale for stone production of alumina Built in 1951 Weight 4000 kg L x W x H: 220 x 150 x 300 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
baler manufacturer: PAAL Type: HAKO 30 SO Year built 1987 technical data: Pressing force: 30 t Power: 22 kW Filler: 1.800 x 1.020 mm Hydraulic 2 x upper box Cap Size: 750 x 1,100 mm Setting: 4 x vertical and 2 horizontal fold by hand Bale weights: up to approx. 500 kg Machine weight approx.: 14.000 kg
used
We have for sale 4 pcs of Hydraulic Press 750 T single action table 3000 x 1900 mm Very good condition Under power
used
AUTOMATIC BRIQUETTING machine type COMAFER DINAMIC 85N second hand machine volt. 380/50 CE mark : Yes briquett diameter mm. 60 production from 40 kg. to 85 kg. / hour motor power Hp 7,5 net weigth kgs. 850
used
Kieserling Press, mechanic press, 500t, table 2900 x 1550mm
new
AYEL-TECH WORKSHOP PRESS TYPE WP 15 -Capaciteit 15 ton -Cilinderslag 260 mm -Werkbreedte 500 mm -Electric of hand-mat bedienbaar -Pressure gauge -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)
Muller Press, hydraulic press force 1000 T, double action, table 2600 x 2250 mm 2 pcs available
used
• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...
used
Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.
used
Dough dividing and moulding machine Make: SCHRÃ?DER Model: FORTUNA A-3 slot 30-piece set With 3 new casting plates -top obsolete -with warranty -Delivery: free house within Germany
used
Automatic baler Manufacturer: HSM Type: VK 4012 Year of construction: 2005 specifications: pressing force: 45 t Channel format: 720 x 900 mm (W x H) Setting: 4 x horizontal Filler: 1.000 x 650 mm Power: 22 kW with Superchargers Throughput capacity at 40 kg/m³ bulk density: maximum approx. 12.8 t/h Bale dimensions: approx. 720 x 900 x length (600-1.200) mm including funnel in special execution for the purpose of manual loading
used
MECHANICAL PRESS KRUPP 1000 TONS Model: PDqV 4-1000 Condition: Very good, complete, dismantled Technical details: Force: 1000T Strokes per min. 8-30 The stroke 400 mm Shut height (SDAU) 1300 mm Slide the adjustment 300 mm Slide the dimensions 4200 x 2000 mm Bed size dimensions 4200 x 2000 mm Frontal opening 4300mm Lateral window 2600 x 1400 mm
used
Pneumatic pin press for printed circuit boards