screw presses used for sale

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 330 Kraftformer

Capacity: 1 t Bed length: 0 mm Bed width: 0 mm Slide length: 0 mm Slide width: 0 mm Slide stroke: 0 mm Eckold KF 665 Gigant Kraftformer 

Capacity: 250 t Stroke: 10 mm Distance column/center (Throat): 360 mm Table length: 900 mm Table width: 630 mm MAKE   WMW Zeulenroda TYPE     PYE 250 N YEAR    80 er SPECIFICATIONS Hydraulic / Mechanical HydraulicPress force   250 Ton Table Length x Width  900 x 630 mm Throat360 mm Die height   1000 mm Stroke Length   500 mm Power  11 kW DIMENSIONS Length    1250 mm Width     2000 mm Height   3800 mm  

Capacity: 220 t Table length: 4300 mm Table width: 2000 mm Stroke: 0 mm MACH-id  3415 MAKE   Comessa TYPE   PR 220 YEAR    1975 SPECIFICATIONS   Hydraulic / Mechanical Hydraulic   Press force   220 Ton Table Length x Width   4.300 x 2.000 mm Die height  1.000 mm Power5.5 kW Comessa Portal straightening  

Capacity: 30 t Bed length: 980 mm Bed width: 850 mm Stroke: 600 mm Day light: 920 mm SPECIFICATIONS Hydraulic / Mechanical   Hydraulic Press force   30 Ton Table Length x Width   980 x 850 mm Throat  920 mm Die height  920 mm Stroke Length  600 mm  

KEMWALL ENGINEERING POWDER PRESS Year: 2002 CE Marked: YES Model: KC 21/12 Voltage: 415V Frequency: 50 Hz Serial No: P6-5/4864

Capacity: 17 t Opening maximum: 150 mm Workpiece height maximum: 100 mm Make Amada FIMAU 17 Type FIMAU 17 Year 1996 Never used Horizontal bending machine Outside diameter max. (mm)Table L = 640 Inside diameter max. (mm) Table W = 540 Max. pipe length (mm)Stroke = 150 Max. angle Force = 17 T Wall Thickness (mm)Speed 17 mm/S Die Height = 100 Manuel stop Never used !

Capacity: 80 t Stroke: 250 mm Diameter ram: 0 mm Bed length: 0 mm Bed width: 1040 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm) X = 600 Cross Y (mm)Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5 Swivable head 90 Gr. Feeds all directions  

Capacity: 250 t Distance between uprights: 4500 mm Stroke: 0 mm Day light: 0 mm Make Bakker 250 Ton Type YARD 250 Year 70 er Force = 250.000 Kn Outside diameter max. (mm)Column = 4.500 Inside diameter max. (mm)Height = 2.480 Max. pipe length (mm)U ram = 1.770 Max. angle Ram = 285 Wall Thickness (mm)Large set tools  

Capacity: 1 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm Make Lucas VBU 4 Type VBU 400 trimming & bearding Year 12 . 2001 Siemens SIMATIC Max. swing = 500 mm Thickness = 5 mm Stroke cylinder = 350 mm 2 x Support ZHSA 2 x Sick safety guids  

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

Capacity: 16 t Table length: 0 mm Table width: 0 mm Stroke: 70 mm Make EBU 16 T Type H 16 Year 1992 Excentric press with air clutch Force = 160 kN Stroke adjustment 4 - 70 mm Ram adjsutment = 80 mm Stroke%27s 160 /Min Air clutch Moving table Separate electic cabinet  

Capacity: 100 t Distance between uprights: 1020 mm Stroke: 300 mm Day light: 0 mm Make Sahinler 100 T Type 1020 Year 1998 Workshop press 100 Ton sahinler pers Capacity (metric tons) 100 T Folding length (mm)Width = 1.020 Down stroke or Up stroke Table L = 1.020 Tandem type Table W = 500 Stroke = 300 mm 8.8 / 4.4 / 9.9 mm/Sec Tooling package New Euro 15.000  

automatic baler Manufacturer: PAAL Type PACOMAT II S SO Year of construction: 1994 specifications: Pressing force: 50 t Specific pressing force: 7.14 kg/cm² Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm Drive power: 45 kW Throughput: approx. 170 m³/h automatic 4-fold horizontal binding

Plate size 470 mm, During the process, a filter cake builds up from retained solids, which increasingly takes over the filter effect of the filter cloth. Thus, the initial surface filtration becomes a cake filtration with depth effect. With the "classic" chamber filter presses, the entire filtration cycle is driven via the feed pump. It starts with high throughput volume flow at low back pressure. As a result of the building up filter cake, the volume flow decreases with simultaneously increasing back pressure.

C - Frame Pneumatic, Hydraulic Press Pressing force: max. 75 to. Control: STE 328-89-1 1/2'' complete. Table area: 996 x 695 mm. Installation height: max. 600 mm. Total stroke: 150 mm. Force stroke: 10 mm. Incl. 2 - hand control panel, protective device and documentation. Weight: 5700 kg. Abm. WxDxH: approx. 1300 x 1700 x 3700 mm. Good operational condition. The machine can be inspected and demonstrated under power in consultation and is immediately available. Please also note my other entries.

type: 6334A Deph of throat -- ramcentre: 450 mm Length: 2500 mm Depth : 2200 mm Height: 3300 mm

Maker: SUMITOMO HEAVY INDUSTRIES (made in Japan) Model: FPA-3000 Year: 1985 (2) Capacity & main specification 1) Capacity: 3000tf 2) Ability Limit Point: 5mm 3) Allowable eccentric load: 3000tf 4) Allowable eccentric distance: L&R 350mm 5) Slide stroke: 350mm 6) Slide stroke speed: 20~50spm 7) Stroke number: 20tpm(Max) 8) Shut height: 1200mm 9) Slide adjust distance: 10mm 10) Bed hard plate dimensions: RL 1300mm x FB 1500mm 11) Slide dimensions: RL 1200mm x FB 1400mm 12) Slide knockout capacity: Total 20tf (pin number: 4ea) 13) SKO stroke: 50mm ( adjust up) 40mm ( adjust down) 14) Bottom knockout capacity: 50tf (pin number 4ea) 15) BKO stroke: 20~30mm 16) Upright internal dimensions: RL 1400mm 17) Main motor: DC 200kw x 1450rpm 440V 18) Floor height: 6800mm 19) Working height: 1030mm 20) Side opening: FB 1000mm x TB 1400mm 21) Flywheel energy: 200tf-m (50spm)  ...

Inv. Num. : 5831 Type: PKnT 160 Producer: ERFURT Created: 1987 Parameters: Compressive force: 160 t Maximum stroke rate top table: 15 1/min Total power requirement: 21 kW Ram stroke: 265-425 mm Adjusting the plunger: 130 mm

SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins

Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of construction: 2004-2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Dough dividing and warping machine Fortuna Bread roll press size 3 Semi-automatic 30-piece Part header NEW revised Stainless steel knives NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g Round/85g Square Capacity max. 7000 pieces/h with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty

Used filter press made by Spadoni made of stainless steel. Number of plates - 103. Plates with dimensions of 600x600 mm. Hydraulical pressure.

SPECIFICATIONS: Hydraulic carpentry board pressing system for the production of coffins (oak, poplar, fir and other types of wood) Dimensions of the press mm: 2100 x 1600 with 9 pistons Stroke mm: 150 Complete with: - Automatic loading - 4 pressing units - Automatic unloading - 1 saw for the cross-section max. stroke mm 2800 - 1 manually adjustable device for forming floors and coffin covers - Electrical control box Electric hot and cold operation

IHI Transfer Press Model SL4-1600-450-220. With NC Feeder, Transfer System including Robots. New : 1984 Capacity : 1600 ton Stroke : 850mm Die height :1400mm Slide Adjustment : 500mm No. of Stroke : 16R.P.M Bolster Area : 4500 x 2200mm Clutch working Air Pressure : 4.5kg/cm2

Capacity 100 ton Table 880x715 mm Max. sheet thickness 3 mm Stroke per min. 360 Stroke 25 mm Ram adjustment 70 mm Distance Ram-table 400 mm 15 kW Dimensions LxWxH 3300x1600x2600 mm Total weight 10 tons

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons

2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.

Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...

Custom made Overall dimensions: 800 x 900 x 1700 mm Table size: 340 x 240 mm Opened height: 340 mm Stroke: 260 mm Working pressure: 180 bar

Used dough divider / bread roll press EBERHARDT, Type: Optimat - including 4 casters - Maximum dough layer: up to approx. 3,200 g - technically tested and cleaned - immediately ready for use The machine is in good condition and ready for immediate use. Viewing and test run are possible by arrangement.

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

Punching machine make WEINGARTEN type XKSHw 30Press force: 30 tSheet thickness: 1.5 mmStrokes per minute: 80 - 240Tappet adjustment: 45 - 20 mmRam stroke: 10 - 60 mmTable size: 300 x 500 mmOpening in the table: 120 x 220 mmDischarge: 170 mmPassage between the columns in front Machine: 400 mmExternal dimensions L x W x H: 1500 x 1400 x 2200 mmWith- Feed device- straightening station- modern control cabinet rear a.d. machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Small eccentric press make BMW type TP 3Machine -No: 60301724 Year of construction 1964Max. Press force: 3.0 tTable size: 200 x 160 mmBear size: 80 x 60 mmDiarrhea hole in the table: 80 mmDrive power: 0.37 kWWeight approx: 134 kgOutside dimensions approx: 700 x 350 x 750 mmWith- 2-hand release- Footswitch- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Multi Punching machine Fabr. EDEL type ALM 35/1700Fabr. -No: 19704-1265Punching force: 35 tWorking length: 1800 mmTable width: 500 mmEngine power: 3 hpWith- welded all-steel construction- wide Fußausrückung- Longitudinal T-slots in the tablewithout tools (the tool must be made especially for the respective work)usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type AZR / H638997 built in 1988Max. Press force: 63 tStroke adjustment: 10 - 90 mmRam adjustment: 55 mmRam strokes: 70 hpM.Table size: 800 x 800 mmDrive power: 4.0 kWWith- large table- 2 damping cylinders- Two-hand release- hydraulic clutch- Additional brakeused, in first-class conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type DEPSR 63Year of construction 1980Technical specifications:Printing capacity: 63 tSlide adjustment: 100 mmStroke adjustment: 60 mmStrokes: 150 HpM.Drive power: 5.5 kWWeight approx: 5500 kgWith- BVK 422 feed unit Feed max. 200 mm Band width max. 200 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Foil stamping press make SCHÖN & CIE type 22 BFabr. -No: 25864Technical specifications:max. pressing force 60 tTable size 350 x 320 mmHeating power 50 - 450 ° CPunching stroke adjustable 1 - 14 mmDrive power 1.5 hp / 1410 rpm.External dimensions 800 x 1100 x 1550 mmWith:- infinitely adjustable punching and embossing time- infinitely adjustable film transport- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic single-column press make MATRA type ME 63.2Machine No: 519299Press force: 63 tOperating pressure: 200 barPiston diameter: 185 mmTable size: 700 x 600 mmOutside dimensions: 1100 x 1700 x 3200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic Double Column Press Fabr. SCHÖN Type TES 16 tMachine -No: 1838 built in 1977Pressure force: 16 tClamping area: 440 x 320 mmgr. distance clamping surface - ram: 280 mmgr. ram stroke: 100 mmDrive power: 5.5 hpOutside dimensions: 1000 x 1000 x 2000 mmWeight approx .: 1000 kgWith- Sick photoelectric barrierUsed, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic table-top press Fabr. VVB ZeulenrodaPressing capacity: 4 tTable size: 220 x 340 mmDischarge: 190 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Single column press make MÜLLER type CD 16.11.55Machine -No: 10480 Year 1983Press force: 16 tTable size: 450 x 350 mmPiston diameter: 90 mmBear size: 320 x 240 mmPiston stroke: 100 mmDiarrhea opening in the table: 100 mmDimensions L x W x H: 700 x 1100 x 2005 mmWith- Cutting impact damping- safe control- Two-hand release- Photocell- infinitely adjustable pressure settingused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Double Column Press Fabr. EDELHOFF Type HZP 45Fabr. -No: 8420 built in 1978Max. Punching force: 45 tMax. Ram stroke: 200 mmTable size: 580 x 550 mmInstallation height: 400 mmDistance between the uprights: 600 mmClamping pin hole diameter: 40 H 7Dimensions L x W x H approx. 1200 x 1000 x 2700 mmWeight approx. 3000 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electro-hydraulic. Workshop Press Fabr. DAKO Best. -No: 2510Masch. -No: 1532 year 1977 / frame: homemadePower: 300 barHydraulic cylinder: 200 mm longDrive power: 0.5 kWPower connection: 220 V / 50 HzFrame:Installation height: 1000 mmPassage between the stands: 550 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

4-column press make FIBRO FISCHER - BRODBECK type UVOS 63Machine -No: 12-306-08, built in 1964Press force: 63.6 tRetraction force: 33 tOperating pressure: 250 AtuTable surface: 500 x 750 mmClear dimensions between the columns: 260/530 mmStroke: 350 mmInstallation height: 600 mmOutside dimensions approx: 1400 x 750 x 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools