136,426 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 8585 Type: KPRW 160 Producer: Kieserling Created: 1972 Parameters: Compressive force: 160 t
Complete wood pellet production line up to 2000kg/h. Currently still connected, can be launched, tested. Sold for dismantling. The entire line - from automatic sawdust feeding to semi-automatic packaging in PE bags or big bags. The line is equipped with a sawdust moisture flow meter (German) that constantly measures sawdust moisture after drying, making it much easier for the operator to regulate the drying process. 2-3 workers worked per shift. Granulator - 2x55kW motors, matrix diameter 450mm.
Key data: 5 t, 150 mm
Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed (Approach Fast Speed: 350 (mm/s) Lower Speed (Under Pressure Slow Speed: 36mm/s Rise Speed 250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size Height (mm) 986 Width (mm) 485 Depth (mm) 920
Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg
Yoshikawa US-66 riveting machine 5mm high spin type: US 66 - Crimping ability (Mild steel rivet) φ5 mm or less - Spinning head: 5-40 mm - Distance between tabletop and punch: 90-285 mm - Table working surface size: 250x250 mm - Processing time setting range: 0.2-9 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5 kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.12kw Machine size Width 330 x depth 610 x height 800mm Machine weight 95 kg
Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual
pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg
Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.
The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...
The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...
pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 100 mm/sec return speed: 75,0 mm/sec work speed: 7,0 mm/min work stroke: 180 mm dayligth: 415 mm oil volume: 200 ltr. table height: 900 mm voltage: 400 Volt range L-W-H: 4450x2050x2650 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - FIESSLER AKAS - laser protection in front of the machine - Deer foot upper tool - Universal die block - manual table crowning - Safety device: light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 400 t chamfer lenght: 4100 mm distance between columns: 3550 mm column arm: 510 mm ram stroke speed: 110 mm/sec work speed: 8.4 mm/sec return speed: 130 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 1000 mm table width: 240 mm back stop - adjustable: max. 800 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30.0 kW weight: 26409 kg range L-W-H: 5450 x 2650 x 3470 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 ...
pressure: 125 t chamfer lenght: 3100 mm distance between columns: 2550 mm throat: 250 mm stroke: 120 mm ajustment speed: 70.0 mm/sec working feed: 7.0 mm/sec return speed: 60.0 mm/sec dayligth: 325 mm table width: 180 mm work height max.: 915 mm oil volume: 150 ltr. total power requirement: 12.5 kW weight of the machine ca.: 9100 kg. range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop () Equipment: - simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam - electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display - electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display - swiveling operation, left-hand side - split deer foot + pointing tool - 1 ...
Key data: 250 t
Inv. Num. : 8652 Type: ZHS 250 Producer: ŽDB Hydraulika Generated: 2000 Parameters: Compressive force: 250 t Table length: 3500 mm Table width: 1200 mm Stroke: 700 mm Ram dimensions: 3500 x 1200 mm Working speed: 13-60 mm/s Machine height: 6000 mm Machine length: 3000 mm Machine width: 5000 mm Machine weight: 60000 kg
pressure: 50 t chamfer lenght: 2500 mm distance between columns: 2050 mm throat: 200 mm table width: 140 mm table height: 750 mm distance table - lower edge of ram: 300 mm max. ram stroke: 100 mm closing speed: 9 - 160 mm/sec return speed: 55 mm/sec voltage: 380 V / 50 Hz engine output: 4,1 kW total power requirement: 5 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3, x 1,2 x 2,6 m Equipment: • manuel back stop • upper and lower tools Split , lower tool 2000 mm long • 2 manual operation / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 t chamfer lenght: 2500 mm distance between columns: 2050 mm table width: 140 mm table height: 750 mm total power requirement: 8 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3, x 1,2 x 2,6 m Equipment: • manual back stop • upper and lower tools • 2 manual operation / foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing
gebr. Post-bending press Fabr. Graebener, Type GRNM, YOC 2005 max. bending force 16 t. Tool length 1,600 mm Adjustment of the underswing, hydraulic 2 cylinders Dimensions 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Weight 65 t.
Book press Tränklein ZP 39 Combi; cleaned and tested; Format per press plate 322x440mm; Insertion height 400mm; Pressing force 5t. Book press Tränklein ZP 39 Combi; cleaned and checked; size per pressing plate 320x440mm; hight 400mm; press capacity 5t.
pressure: 150 t throat: 310 mm stroke: 30-120 mm no. of strokes: 20-60 Hub/min ram - range of adjustment: 90 mm table surface area: 820x600 mm ram surface: 550x430 mm hole in the table: 330x200 mm table height: 750 mm tool hole in ram: Ø50 mm weight of the machine ca.: 9,5 t dimensions of the machine ca.: BxTxH 2500x2500x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 100 t
Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee
Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 630 t, 275 mm
For sale is a used lowering press, manufacturer Sack + Kiesselbach, type EP 630. The machine is in very good condition. The press worked in an engraving company as a test press. Technical data: Pressing force: max. 630 tons. Installation height: max. 325 mm Stroke: max. 275 mm Weight: 4,000 kg
pressure: 35 t throat: 240 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x450 mm ram surface: 360x180 mm hole in the table: 220x130 mm table height: 630 mm tool hole in ram: Ø35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: BxTxH 1500x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm
pressure: 100 t throat: 375 mm stroke: 20-125 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm table surface area: 920x660 mm ram surface: 700x450 mm hole in the table: Ø90 mm tool hole in ram: Ø50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 2100x1500x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.
Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg
Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4
We would have all these machines as a package for sale. 1x Press brake 160to 3m 1x Press brake 60to 2m 1x KRC 150 robot 1x welding robot cell with Kuka robot and Fronius TPS4000 1x Micron
Slotted Hole Drilling Machine Scholz Type L4 Machine No. 4905 Motor power 2.2 kW With 1 hold-down device on the table Table can be moved to the left and right Drill motor can be moved forward and backward Table size 560 mm x 250 mm Height-adjustable table Flat belt drive Weight with pallet 305 kg Shipping dimensions 1320 mm x 800 mm x H 1500 mm
pressure: 60 t stroke: 400 mm daylight longitudinal/sideways: 820 x 300 mm dayligth: 900 mm liter capacity: 6,5 l feed down: 6,1 mm/sec feed up: 10 mm/sec Motor output: 2,2 kW weight of the machine ca.: 0,675 t dimensions of the machine ca.: 1,46 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t stroke: 400 mm daylight longitudinal/sideways: 1010 x 300 mm Motor output: 4,0 kW liter capacity: 11,0 l dayligth: 900 mm table surface area: 1010 x 560 mm feed down: 4,8 mm/sec feed up: 7,5 mm/sec weight of the machine ca.: 0,9 t dimensions: 1550 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
Rep M46 Injection Moulding Machine Size of platens 430x430mm Injection unit short volume 670cm3 Injection pressure 1690 bar Injection force 331kN
Specifications Maximum pressure: 5.7 tons Pressing force: 1.18 kg/cm Bale size: 600x800 mm Bale weight: approx. 70 kg Power connection: 400V / 1.5 kW Year of Make: 2009 Productivity: approx. 3 bales/hour
COLOGNE L2 YOC 1992 Rated current: 3.2 A (380V) 2 speeds (1,500 + 3,000 rpm) 2-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Drilling length: 200 mm Height adjustment by handwheel: 120 mm Altitude display via dial gauge in the handwheel Tischgr. 350 x 820 mm Keyless chuck 2 pneumatic workpiece clamps (safety clamping cylinders) Mitre stop (adjustable up to 60° on both sides) 90° plug-in stop Chassis Weight: 220 kg Manufacturer
Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz
Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm
blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.
used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg
Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg
used
Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm
pressure: 630 t diameter: 320 mm stroke: 310 mm total power requirement: kW weight of the machine ca.: 3500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: EXNER Model: PG 80 Year of Manufacture: 2014 The EXNER PG 80 is a four-column hydraulic tool testing press for testing stamping, forming, embossing, and drawing tools. It is designed for high precision and durability, with modern proportional hydraulic control and digital force display for tool setup and testing. Technical Data Press Ram - Number of press cylinders: 2 pcs - Nominal force (adjustable): 2 × 400 kN - Return force: 2 × 150 kN - Stroke: 350 mm - Ram width: 2100 mm - Ram depth: 840 mm - Guide length: 750 mm - Ram speed under load (100%): approx. 0–10 mm/s - Ram return speed: approx. 0–20 mm/s - T-slots (DIN 650): 18 mm - T-slot pitch: 150 mm Installation Space - Installation height (top to bottom): 550 mm - Table width: 2100 mm - Table depth: 840 mm - Table T-slots (DIN 650): 18 mm - T-slot pitch: 90 mm - Table passage (W×D): 1300 × 120 mm (to be ...
maximum number of results exceeded
please refine your search
