screw presse used for sale

Power: 15 kW (20 hp) Operating parameters: Working pressure 11 bar; FAD: 2.20 m³/min @8 bar; 1.86 m³/min @11 bar; 1.40 m³/min @15 bar; noise ~65 dB(A); operating hours 39,454 h Workpiece capacity: Industrial compressed air supply; continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2007; Manufacturer N/C Remarks: Used condition; high operating hours; D service applied; suitable for workshop and industrial air systems 15 kW rotary screw compressor with variable FAD depending on pressure and low noise level. Auction-ID: A7-44886-3

Power: 75 + 2.2 kW Operating parameters: Working pressure 10 bar; FAD 10 m³/min; noise ~75 dB(A); operating hours 51,000 h; dim. 1,995 x 1,065 x 1,450 mm; wt. 1,320 kg Workpiece capacity: Industrial compressed air supply; high-capacity continuous operation Supported edges: N/A Edge types: Compressed air generation Included equipment: Rotary screw compressor; air-cooled system; control panel; enclosed housing Compliance: Industrial compressor unit; CE N/C Power supply: Electric (3~) Year/Manufacturer: 2011; Manufacturer N/C Remarks: Used condition; high operating hours; suitable for large-scale industrial air demand applications High-capacity 75 kW rotary screw compressor delivering 10 m³/min at 10 bar. Auction-ID: A7-44886-5

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Cordless Screwdriver METABO Powermaxx BS Year 2012, S/N 2126713103, Battery, Charger, Case

Cordless Screwdriver MILWAUKEE M18 Year 2021, S/N 46911403007042, Battery

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 0.3/1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 150 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2120/300/H540 mm -Weight: 168 kg

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Conveying length: approx. 2260 mm Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2870/760/H500 mm -Weight: 284 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2240/760/H520 mm -Weight: 278 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, -Rexroth: R15104D977/R15104D973 -Shaft: Ø 38 mm -Thread length: 1150 mm -Number: 2x spindles available -Price: complete -Dimensions: 1710/330/H250 mm -Weight: 54 kg

Ball screw with nut, Transroll spindle, ball screw nut, screw spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw -Shaft: Ø 15.5 mm -Thread length: 770 mm -Price: per piece -Number: 2 piece -Dimensions: 950/45/H90 mm -Weight: 1.8 kg/piece

Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 -Shaft: Ø 24 mm -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm -Weight: 10 kg

Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw -Shaft: Ø 20 mm -Thread length: 525 mm -Dimensions: 680/100/H70 mm -Weight: 4.6 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece -Weight: 6.3 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available -Price: per piece -Weight: 5.9 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Condition of the scre conveyor: very good -Execution: stable -Drive motor: hydraulic motor -Speed: 150 rpm -Diameter of the screw conveyor 200 mm -Small wing thickness: mm -Length of the screw conveyor: 4470 mm -The pitch of the screw conveyor: 95-195 mm -Opening can be closed hydraulically (dosing screw) -Number: 2x conveyor screws available (outlet different) -Price: per piece -Transport dimensions: 4470/435/H450 mm -Weight: 302 kg/piece

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, injection molding machine, injection molding machine -Replacement screw tips: for injection molding machine -Number: 5x tips available -Sketches with the pictures -different sizes -Price: complete -Admission thread: 27 x 3 mm -Weight: 16.3 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Replacement screw: for injection molding machine -Execution: stable -Screw length: 1900 mm -Screw diameter: 60 mm -Screw pitch: mm -Pipe diameter: mm -Support: Ø mm -Transport dimensions: 60 x 1900 mm -Weight: 24 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Number: 3x replacement screws for injection molding machines -Price: complete -Execution: stable -Screw lengths: 1600/1560/1320 mm -Screw diameter: 60 mm -Screw pitch: mm -Pipe diameter: mm -Holder: Ø 55 x 75 mm -Transport dimensions: 1600/120/H100 mm -Weight: 90 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon head screws: M20, DIN 931 -Weight: 514 kg -Sizes/number: M20 x 45 to M20 x 100, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces = 125 pieces

Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg

Triple screw pump, centrifugal pump, high pressure pump, centrifugal pump, lubricating oil/oil pump, triple screw pump -Manufacturer: Allweiler, screw pump type SPF40R54U8.3-W20 with hose package -Flow rate: 3.4 l/min -Pressure: 3 bar -Motor: 0.7 kW / 1800 rpm -Hose package: length 1x 60 m / 1x 6 m -Dimensions: 1230/900/H960 mm -Weight: 160 kg

Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg

Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fastener hanger screws and adapter plates 350 kg -Hanger screws: M10 x 200 1632 pieces. -Adapter plates: 80 x 30 x 5,475 pieces / 80 x 40 x 5,673 pieces -Material: A2 AISI304 stainless steel -Levy/Price: complete -Dimension: 1200/800/H540 mm -Weight: 350 kg

Bolts, Hex Bolts, Flange Nuts, Hex Nuts, Flange Nuts, Solar Fasteners -Hexagon screws/hex nuts: M 10 stainless steel 242 kg -Hexagon head screws: DIN 933 M10-1.5 x 100 1000 pieces / M10 x 60 2100 pieces. -Hexagonal nut: self-locking type M10 DIN 982 2700 pieces. -Hexagon nut: with flange and locking teeth M10 SW15 Din 6923 800 pieces -Price: complete -Transport dimensions: 1200/800/H230 mm -Total weight: 242 kg

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 3x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 300 x 140 mm -Wingspan: approx. 300 mm -Clamping depth: approx. 140 mm -Number: 2x screw clamp available -Price per piece -Dimensions: 400/210/H40 mm -Weight: 2.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 250 x 120 mm -Wingspan: approx. 250 mm -Clamping depth: approx. 120 mm -Quantity: 1x screw clamp available -Dimensions: 340/180/H30 mm -Weight: 1.5 kg.

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Conveyor screw, transport screw, screw conveyor, conveyor technology, trough conveyor screw, trough conveyor screw -Conveyor screws: 2 pieces, 1x right / 1x left -Design: stable -Screw length: 555 mm without holder -Screw diameter: 315 mm -Screw pitch: mm -Tube diameter: 115 mm -Hole: Ø 35 x 80 mm -Price/Delivery: complete -Transport dimensions: 550/315/H635 mm -Total weight: 58 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slot screws, T-slot nuts -Clamping tool clamping screw set with storage box -Type: various versions, see photos -Thread: M20 -Price/Delivery: complete -Dimensions box: 380/315/H60 mm -Total weight: 11.7 kg

Screw jack, linear drive, linear gear, jack, screw jack element, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Pfaff silver blue, screw jack -Type: SHE 2.5 -Useful stroke: 200 mm -Shaft: Ø 16 x 40 mm on both sides -Spindle head: bore Ø 25 mm -Dimensions: 465/190/H165 mm -Weight: 10.1 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 280 mm -Max. height: 468 mm -Submission/Price: complete -Dimensions (each): 220/190/H280 mm -Weight: 9.9 kg/piece

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 10 pieces, for machine tools and systems -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 440/210/H255 mm -Total weight: 24.4 kg

Screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile, T-nut - Grub screws: Hex socket set screws with pin, 30 pieces -Thread: M12 left -Price/Quantity: 30 pieces -Price: 6 euros net for 30 pieces -Number: 4000 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 58 kg

Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Brand: ALUP Model: SCK-51-10 Serial number: 19100774 Specifications: - Max. pressure: 10 bar - Air flow: 5,100 l/min - Power: 37 kW - Air dryer: Integrated - Electrical connection: 400 V - Operating hours: 36,000 h Dimensions (L × W × H): 840 × 1,880 × 1,720 mm Auction-ID: A7-45257-9

Weiler Commodor B incl. 3 - axis digital display - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection - 2x Emergency / Off - Swarf back wall - Coolant device - Work light - Multifix with inserts - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

Type: Flexible auger Length: 5 m Engine: Electric motor Equipment: Flexible hose with suction probe Use: Transfer of materials (pellets, chips, etc.) Status: Good overall condition Auction-ID: A1-45418-16

Code: 0350 Brand: FINI Model: KSC 5 - CE Standard Screw air compressor with dryer - CE Standard Compressor FINI KSC 5 CE Standard Motor 5,5 Hp Pressure 10 bar Rotational speed 1450 rpm Air flow 450 lt/min Tank capacity 270 lt Compressed air dryer HITEMA EDR 2.6 - CE Standard Flow rate 36 mc/h - 600 lt/min Rated power 0,19 Kw Volt 220 Overall dimensions: Compressor mm 1350 x 600 x 1200 h - 168 kg Dryer mm 350 x 450 x 770 h - 33 kg