screw presse used for sale

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specifications: capacity: up to 5 m?/h depending on product, suitable to dose up to 10kg/filling | Discharge height: ca. 1.850mm | standard angle: 45? | diameter of pipe: 141mm | Power: 380V, 1.56kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 170kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30- ...

Blitz Screw Compressor+ Blitz Refrigeration Dryer+ 2000 ltr. Compressed air tank 11 bar, compressor engine 37 Kw., 5.2 cbm/min. 10 bar

with 4 capping heads Type: 97 Capacity: approx. 8,000 - 10,000 bph

Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

Stock number: D1223, Material: Galvanized, In stock: Yes, Amount in stock: 1 pc., O-profile: Yes, Dimensions: Ø 100 x L 2980 mm., Motor: 1,1 kW, 220/380 Volt, 388 rpm, Dimensions inlet: Ø 150 mm., Dimensions outlet: Ø 150 mm.

Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Eccentric screw pump, Amount in stock: 1 pc., Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30

Stock number: D998, Screw conveyor, stainless steel,, U-profile., Ø 310 x L 1930 mm., 3 kW gear motor, 61 rpm., 220/380 V., With dosage screw Ø 60 mm., Material: Stainless steel AISI 304, Dimensions: Ø 310 x L 1930 mm.

Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Item: Eccentric screw pump, Amount in stock: 1 pc., Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8

Stock number: D999, Screw conveyor, stainless steel,, O-profile with inlet hopper., 2,2 KW gear motor,, 220/380 volt., Ø 250 x L 2180 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 2180 mm.

Stock number: D971, Screw conveyor, stainless steel,, o-profile., Ø 170 x L 1580 mm., 1,5 kW gear motor, 71 rpm., 220/380 V., Material: Stainless steel AISI 304, Dimensions: Ø 170 x L 1580 mm.

Stock number: D936, Draining screw conveyor, stainless steel,, Iras type TU, 5,5 kW gear motor., 65 rpm., 400/690 V., Draining screen with, 5 x 20 mm. gap., Ø 400 x 3800 mm., Material: Stainless steel AISI 304, Dimensions: Ø 400 x 3800 mm.

Stock number: D654, Screw conveyor, stainless steel,, O-profile., 2,2 kW gear motor, 70 rpm, 380 V., Ø 250 mm outlet with bag squeezer., Ø 160 x 2050 mm screw., Material: Stainless steel AISI 304, Dimensions: Ø 160 x 2050 mm.

Stock number: D656, Screw conveyor, stainless steel,, BM., 100 l. product funnel with flexible screw., Ø 60 mm., 1,1 kW gear motor, 397 rpm, 380/420 V., Litre: 100 , Material: Stainless steel AISI 304

Stock number: D653, Screw conveyor, stainless steel,, O-profile., 1,1 kW gear motor, 18,8 rpm, 220/380 V., Ø 140 x L 1950 mm snekke., Material: Stainless steel AISI 304, Dimensions: Ø 140 x L 1950 mm.

Stock number: D605, Screw conveyor, stainless steel,, O-profile., Inlet connection branch Ø 230 mm., Outlet connection branch 940 x 250 mm., 1,1 kW, 6,2 - 43 rpm, 220/380 V., Ø 250 x L 1950 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 1950 mm.

Stock number: D609, Screw conveyor, stainless steel,, trough type,, Ø 250 x L 3380 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 3380 mm.

Stock number: D563, Screw conveyor, stainless steel,, BENA 1996., O-profile, Ø 138 x L 1015 mm., 1,3 kW gear motor., Material: Stainless steel AISI 304, Dimensions: Ø 138 x L 1015 mm.

Stock number: D513, Vacuum screw conveyor, stainless steel,, Gerivac., Ø 150 x 2250 mm screw., 4 hp gear motor, adjustable speed., 22,5 - 158 rpm., Material: Stainless steel AISI 304, Dimensions: Ø 150 x L 2250 mm.

Stock number: D429, Screw conveyor, stainless steel,, O-profile., Ø 210 x L 1500 mm., 0,55 kW gear motor, 52 o/min., 220/380 V., Material: Stainless steel AISI 304, Dimensions: Ø 210 x L 1500 mm.

Stock number: D2025, Screw conveyor, stainless steel,, estimated 1,5 kW motor, 380 volt., U-profile,, Ø 320 x L 1720 mm., Material: Stainless steel AISI 304, Dimensions: Ø 320 x L 1720 mm.

Stock number: D1195, Screw conveyor, stainless steel/steel 37,, u-profile., 1,1 kW. gear motor,, 220/380 Volt., 28 rpm., Ø 230 x L 2000 mm., (Fits SD067)., Material: Stainless steel AISI 304/steel 37, Dimensions: Ø 230 x L 2000 mm.

Stock number: D1181, Screw conveyor, stainless steel,, 0,55 kW gear motor., 121 rpm,, 220/380 Volt., U-type with lid and washing pipe,, obliquely placed on legs., Ø 200 x L 1700 mm., Material: Stainless steel AISI 304, Dimensions: Ø 200 x L 1700 mm.

Stock number: D1154, Screw conveyor, stainless steel,, o-profile., 1,1 kW. gear motor,, 230/400 Volt., Ø 130 x L 3050 mm. screw., Material: Stainless steel AISI 304, Dimensions: Ø 130 x L 3050 mm.

Stock number: D1122, Screw conveyor, stainless steel,, o-profile., 0,37 kW. gear motor,, 380 Volt., Ø 140 x L 1580 mm., Material: Stainless steel AISI 304, Dimensions: Ø 140 x L 1580 mm.

Stock number: D1118, Screw conveyor, stainless steel,, u-profile, with 3 pcs. of removable lids., 0,75 kW. gear motor,, 133 rpm., 220/380 Volt., Ø 125 x L 2500 mm., Material: Stainless steel AISI 304, Dimensions: Ø 125 x L 2500 mm.

Stock number: D1117, Screw conveyor, stainless steel,, u-profile, with lid., Double jacket., Insulated, outer fully welded stainless cladding,, 1,5 kW gear motor., 26,24 rpm., 230/400 Volt., Ø 300 x L 4170 mm., Material: Stainless steel AISI 304, Dimensions: Ø 300 x L 4170 mm.

Stock number: D1042, Screw conveyor, stainless steel,, U-profile with lid and inlet hopper., Standing in leg rack,, Ø 250 x L 1730 mm., 2,2 kW gear motor,, 64 rpm., 380/415 volt., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 1730 mm.

Stock number: PM2076, Eccentric screw pump, stainless acid proof steel,, Seepex type BT 2-12., 1,5 kW. gear motor,, 220/380 V., 186 rpm., Screw feeding,, inlet flange L 350 x W 180 mm., Theoretical capacity 1.000 l/h., Material: Stainless acid proof steel AISI 316

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an  ...

PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.

MARIS TWIN SCREW EXTRUDER, Loading hopper for regrinds, Barrel with 2 x 92 mm screws 40 L/D, co-rotating parallel screws for polyolefines, CEAR d.c.motor, N.2 vacuum degassing pumps, 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, Electrical control panel, The machine is offered as is or checked

MARIS TWIN SCREW EXTRUDER, Barrel with 2 x 92 mm screws 40 L/D, n.2 vacuum degassing pumps, co-rotating parallel screws for polyolefines, complete with 4-plate semi-automatic screenchanger, hydraulic pack, Average throughput rate around 1 Ton/h, Water ring pelletizer, drying centrifuge, electric cabinet, The machine is offered as is or reconditioned

MARIS TWIN SCREW EXTRUDER, Type TM 85 LC 37 L/D, dosing unit for granulated materials, barrel with 2 x 85 mm co-rotating screws 37 L/D, max screw rpm : 152, vacuum degassing pump 4,5 kw drive, Present capacity 450 kg/h depending on materials and feeding rate, 64 kw drive, Constructed in 1992, offered AS IS or reconditioned, installed power - used power in work: about 60-65% : 64, screws diam.: 85 mm. 37 L/D, screws: co-rotating

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

FBM plastic extruder with Ø 120 mm spindle and underwater head cutting. Ideal for recycling and granulation lines. Brand: FBM (Falzoni) Model: ETF 120 V 380/5L Motor: 200 kW (270 hp) L/D ratio: 35 Underwater cutting (PRT, 2006) Includes: force-fed silo Extras: degasser and filter changer Year: 1988

Key data: 35 mm, 25 , 103 U/min

Used extruder 35mm - 25 l/d with 5.6 kW drive 3-zone auger 3 heating/cooling zones on the cylinder + 1 tool zone Mass pressure sensor 500 bar All machine cables designed to be plugged in Control cabinet with main switch, motor controller, mass pressure indicator and 4 pieces of temperature controller Function-tested

Schraubenkompressor / Screw Compressor ECOAIR D 50 Baujahr / Year 1991 - Serial-No. 27020521 Verdichtungsdruck / Compression Pressure 10 bar Drehzahl / Rotation Speed 2950 u/min Volumenstrom / Volume flow 5,0m2/min Leistungsbedarf des Verdichters / Power requirement of the compressor 37 kW Abmessungen / Dimensions 200 x 80 x 150 cm Gewicht / Weight 730 kg

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Serial No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-rigid profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 k ...

Stock# U2457-3 Used stainless steel horizontal screw conveyer by Van Beek BV (NL) type "U", model TR300. Width of the gutter 315 mm. Screw has diameter 300 mm, lead of the screw 270 mm, total length of the screw 290 cm. Conveyer has two inlets, each with diameter 298 mm and rotary magnetic separator by Goudsmit Magnetic Systems (NL). Each separator is driven by el motor and reducer 0.18 kW, 1320/21 rpm, 220-240/380-415 V, 50 Hz. Spacing between center axis of each inlet is 145 cm. Conveyer has also two rectangular discharge outlets, each with dimensions: 240 mm x 250 mm. Spacing between centers of discharge outlets - 250 cm. Screw is driven via reducer and el motor 2.2 kW, 220-240/380-415 V, 50 Hz. Working rotation of screw up to 64 rpm. Last time machine had been working in food industry as a collector of powdered products from two vibrating screens.

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

Ball screw with servo motor SIEMENSLinear guide with permanent servo motor SIEMENSTyp: 1FK6044-7AH71-1EG0Ident No. YF RN22 5076 01 001Year of construction: 2003Axle movement: 540 mmTotal length: 900 mmShaft diameter: 40 mmThread pitch: 40 mmBall diameter: approx. 6 mm- Compact unit with servo motor and spindle nut- Ball screw guided in a torsion-proof manner, drive via nut- Ball screw 40 mm (hollow shaft, inner diameter = approx. 22mm)- Permanent servo motor SIEMENS type: 1FK6044-7AH71-1EG0 (Serial No.: Ident No. YF RN22 5076

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used

Screw compressor KAESER type BS 50Fabr. No. 402852 built in 1990Volume flow 5 m³/min. Pressure capacity 7.5 barEngine power main motor 30 kWNet connection 400 volts, 50 HzConnection thread 1 1/2 inches- 1107.90Operating hours read- 749.00 load hours read- SoundproofSpace requirement L x W x H 1600 x 1070 x 1350 mmWeight 900 kgvery good conditionWas a reserve compressor and has only a few operating hours; used

Ecoair C10 screw compressor, replacement machine

Hethon 71 Hopper and screw feed 2018, stainless, 100Kg hopper and outfeed screw, screw diameter 60mm, 3Ph, two in stock

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: EST Ticino Type: ET-BM 400 Turning length: 1500 mm Turning diameter bed Ø: 800 mm Turning diameter slide: 470 mm Turning diameter pit Ø: 400 mm Pit length: 750 mm Spindle bore: 130 mm Power spindle: 15 kW Bed width: 600 mm Quill: 130 Ø Stroke quill: 300 mm Spindle mount: 6 Mk Speed: 600 rpm Dimensions (estimated) Length: 4500 mm Width: 1800 mm Height: 1800 mm Weight: 5200 kg with accessories: -Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holders, tips, drill chucks, tools All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the S ...