screw feeder used for sale

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 3x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 300 x 140 mm -Wingspan: approx. 300 mm -Clamping depth: approx. 140 mm -Number: 2x screw clamp available -Price per piece -Dimensions: 400/210/H40 mm -Weight: 2.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 250 x 120 mm -Wingspan: approx. 250 mm -Clamping depth: approx. 120 mm -Quantity: 1x screw clamp available -Dimensions: 340/180/H30 mm -Weight: 1.5 kg.

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Conveyor screw, transport screw, screw conveyor, conveyor technology, trough conveyor screw, trough conveyor screw -Conveyor screws: 2 pieces, 1x right / 1x left -Design: stable -Screw length: 555 mm without holder -Screw diameter: 315 mm -Screw pitch: mm -Tube diameter: 115 mm -Hole: Ø 35 x 80 mm -Price/Delivery: complete -Transport dimensions: 550/315/H635 mm -Total weight: 58 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slot screws, T-slot nuts -Clamping tool clamping screw set with storage box -Type: various versions, see photos -Thread: M20 -Price/Delivery: complete -Dimensions box: 380/315/H60 mm -Total weight: 11.7 kg

Screw jack, linear drive, linear gear, jack, screw jack element, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Pfaff silver blue, screw jack -Type: SHE 2.5 -Useful stroke: 200 mm -Shaft: Ø 16 x 40 mm on both sides -Spindle head: bore Ø 25 mm -Dimensions: 465/190/H165 mm -Weight: 10.1 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 280 mm -Max. height: 468 mm -Submission/Price: complete -Dimensions (each): 220/190/H280 mm -Weight: 9.9 kg/piece

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 10 pieces, for machine tools and systems -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 440/210/H255 mm -Total weight: 24.4 kg

Screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile, T-nut - Grub screws: Hex socket set screws with pin, 30 pieces -Thread: M12 left -Price/Quantity: 30 pieces -Price: 6 euros net for 30 pieces -Number: 4000 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 58 kg

Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 600 mm weight of the machine ca.: 400 kg spindle passage: 26 mm speeds: 55-2000 U/min total power requirement: 1,4 kW dimensions of the machine ca.: 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Kaeser DSDX243SFC screw compressor 132 kW with 8.5 bar and 26.90 m3/min. Inverter integrated. New stage installed at around 45,000 hours

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request

: 0554 mm : 370 mm : 3000 mm : 280 mm : 104 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, for PE PP ABS PC PS, compounds, masterbatches, Average throughput rate 600 kg/h depending on material and feeding rate, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partiall ...

greates pass round over bed: 350 mm swing diameter over face slide: 200 mm centre distance: 800 mm centre height: 175 mm turning length: 700 mm 3-jaw chuck: Röhm Ø 160 spindle bore: 46 mm spindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/min tailstock quill taper MT: 3 weight of the machine ca.: 1000 kg 3-axis digital readout manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ALMiG Screw compressor BELT 30-10 | 30 kW | 10 bar | Industrial quality For sale is a powerful and reliable screw compressor from the ALMiG brand (Made in Germany) – ideal for industry, production or larger workshops. Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: BELT 30-10 Year of Make: 2009 Motor power: 30 kW Operating pressure: 10 bar Volume flow: 4.12 m³/min Drive: Belt drive

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: PM1577, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Motor: 2,2 kW - 163-975 rpm., Theoretical capacity: Max 4500 l/h, Dimensions: L 1300 x W 300 x H 550 mm., Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SH40R8

with 5 capping heads amount of capping heads: 5 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW)

Manufacturer: FIMER, type T/6-V.A. Year of constr. 2000 6 capping heads. for 28 MCA amount of capping heads: 6 working direction: right-left (CCW)

amount of capping heads: 6 type of closures: 30 x 60 working direction: left-right

set for 31,5 x 24 caps. 3 capping heads

amount of capping heads: 5 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: left-right cap sorting system: sorting by disc weight [kg.]: 1000 electrical power supply kW: 380

type of closures: 28 x 15 working direction: rotating turret

amount of capping heads: 6 capacity / hour ca.: 10000 type of closures: 28 x 15 working direction: right-left (CCW) cap sorting system: Vibrating container weight [kg.]: 1,5

Zalkin type CA4 I 300 - serial no. 24361 Stelvin Lux cap 30 x 60 mm with cap feed 4 pcs. cap heads type VS 150, 250 litres cap feed with bars.

Machine is for Guala Closures with 5 capping heads

BVS&MCA 4 heads BVS 30x60mm 4 heads MCA 28mm 4 heads MCA 28mm Varivent new control cabinet with S7 1200 New sorting device Cap inspector amount of capping heads: 6 capacity / hour ca.: 9000 type of closures: 28 x 15, 30 x 60 working direction: left-right cap sorting system: sorting by disc

Bertolaso Athena 40/8 Fruit Juice Filler with Adjustable Stars consisting of: - Jucie Filler 40/8 - 8 Head Screw Capper for: 28 TS RO PP (MCA28),  VC 30x60 (BVS 30/60 , Pick & Place Plastic Caps 38mm

: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mm turning diameter over slide rest: 190 mm turning length: 1000 mm turning dia. in gap: 460 mm spindle head: DIN 55026 Gr. 6 spindle bore: 52 mm turning speed range: 11,2 - 2240 U/min power requirement: 7,5 kW bed width: 355 mm dimensions: 2,8 x 1,3 x 1,6 m weight of the machine ca.: 1,9 t Equipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressor - Manufacturer: Renner GmbH Kompressoren, Germany - Model: RS-Top-5,5 - Type: Oil-injected rotary screw compressor, belt drive - Motor Power: 5.5 kW - Operating Pressure: 10 bar - Free Air Delivery at 10 bar: 0.78 m3/min - Compressed Air Connection: G 1/2 inch Compressed Air Storage Tank - Manufacturer: Airpress - Model: 200L/11B Vert - Reference: 5015 - Capacity: 200 litres - Working Pressure: 11 bar - Orientation: Vertical - Construction: Powder-coated carbon steel Hours: 3500 Find more here - .ucymachines/ Contact us at - sales@ucymachines