screw convey used for sale

Roller conveyor curve 90 degrees Condition: Used Model: Rollers Type: 90 degrees Total width outside: approx. 1840 mm Total width inside: approx. 1080 mm Width incl. motor: approx. 630 mm Conveyor width: approx. 500 mm Roller spacing: approx. 100 mm Wheelbase: approx. 60 mm Plastic castors Material: Steel, Plastic, Aluminum Color: Light Gray, Black SEW motor included Stock: 2 pieces Price per piece Internal Article Number: 2026032601 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent p ...

Conveyor belt / conveyor belt / high conveyor / downward conveyor - Length: approx. 3,050 mm - Belt width: approx. 400 mm - With geared motor - Plastic link belt with curved carriers 100 mm high ---------------------------------------------------------------------- Conveyor belt / transportation belt / high conveyor / down conveyor - Length: approx. 3-050 mm - Belt width: approx. 400 mm - With gear motor - Platic link conveyor belt with bended catch 100 high

Pipe screw, cement screw used without motor for the conveyance of cement or similar materials with directly attached bearings Total length: 6520 mm Screw aisle length: 6130 mm Screw aisle: 210 mm Shaft of 80 mm, slope progressive at the inlet Opening opposite the driven side: inside 210, flange 280 mm Opening 1 driven side: 250 mm Opening 2 (with lid) diameter: 200 mm Matching motor and overhaul can be offered optionally. Drive via flange motor with coupling

A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.

A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.

A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.

A complete unit is offered.

On offer is a very well-preserved VM 8 R screw compressor unit. The electric motor has a power consumption of 30 kW. If you have any questions, please feel free to contact us.

A new replacement stage type VMX 110 RD is offered, see pictures. If you have any questions, please feel free to contact us.

Pneumatic screwdriver, pneumatic screwdriver DESOUTTERDrück air screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4QDreh torque range: 0.6-14.0 NmSpeed: max. 510 rpm. Compressed air requirement: 6 barAir consumption: 8.7 l/sBit input: M6- rotary switch for clockwise and counterclockwise rotation (rotary ring control)- without screwdriver shutdown- compressed air control cable 4 mm- compressed air connection for screwdriver function min. 10 mm- Aluminum bracket for handling device- Screw feeder 12 mm (inner diameter)Dimensions L x W x H

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg

Screws, hex bolts, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hex bolts/cylinder bolts: M10 stainless steel 330 kg -Hexagonal screws: DIN 933 M10 x 100 300 pcs / M10 x 20 4400 pcs -Cylinder head screws: DIN 912 M8 x 35 6600 pcs / M8 x 30 4200 pcs -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg

Screws, hexagon screws, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hexagonal screws/cylinder head screws:M16 / M20 730 kg -Hexagon screws: DIN 931 8.8 M20 x 60 250 pieces / M20 x 55 DIN 933 8.8 4400 pieces. -Hexagon screws: DIN 931 8.8 M16 x 50/22 150 ST -U-washers: Ø 21.0 mm DIN 125 Form B 2100 pcs. -Price: complete -Transport dimensions: 1200/800/H440 mm -Total weight: 730 kg

Mobile Auger with hinged hopper. Ideal for filling of silo trucks. The appliance without problems in the open air can be stored by the hinged hopper. The promotion or a change of location is quickly done with the hitch. (Street legal on request possible)Displacement approx. 60 m m³/h, screw diameter 350 mm, length 8 m, spout height approx. 5 m, drive motor 4KW, capacity of the hopper 4 m³. Please request special designs and snails with different services to meet your needs! We almost always have a solution!

Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...

Pipe screw conveyor screw inclined conveyor without motor used Our own special machine construction can also be made. Pipe diameter approx. 260 mm Pipe length approx. 4780 mm Screw coil length approx. 4200 mm Inlet/outlet-diameter approx. 250 mm Screw tube top open with lid Price without engine We adapt the engine to their use at an additional cost. Ideal snail for wood chips or similar wood chips. Total approx. 5050 x 1000 x 600 mm 2 pieces available

1 used and professionally dismantled cement conveyor screw type ELBA BZL 80/100 , built 1995, engine and gearbox New 2020, AA approx. 8.50 m, 1 spare piece 3.0 m, disassembled and cleaned Errors and intermediate sale reserved, sale from stock

Auger

Triple flour-collecting screw conveyor in steel design Total length 6.2 m, outlet at 5.2 m Screw diameter 150 mm 1 m counter-rotating thread, slope 105 cleaning flaps, Wooden lid with folding boxes, 2 intermediate bearings each, motor 1.5 kw

12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204

5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204

BÜHLER MWSB-100 dosing screw conveyor for weighing 100 mm diameter, length 2.75 m Engine 0.75 kw, rpm 107 Thread in the inlet progressive, inlet ø 390 mm, Outlet ø150 mm with pneumatic outlet Very good condition

Dosing screw conveyor BOSCHE 150 mm diameter Length 1.30 m Engine 1,5 kw 32 rpm right-hand thread, slope 110, at the outlet slope 150, Sliding Inlet 270 x 680 mm, outlet 170 x 170 mm Review and test run in our qualified workshop done Good condition

Stainless steel screw conveyer length: 15 meters. Diameter: 500mm. With drive electric motors, APV valves, protective covers and accessoiries. Dismantled into 3 lengths.

Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.

Screw conveyor, screw conveyor, screw conveyor, discharge screw - Type: Tubular auger - Screw length: 6024 mm - Drive motor: 3.00 kW - Speed: see nameplate - Housing: Galvanized steel - Screw conveyor: stainless steel 1.4301 - Screw conveyor: Ø approx. 490 mm

Conveyor system for powder products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 230 liter volume. Capacity 3 to 5 m?/h depending on product. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specification: capacity: up to 3 m?/h depending on product, suitable to dose up to 5kg/filling | discharge height: ca. 1.850m | standard angle: 45? | diameter of pipe: 114mm | power: 380V, 0.81kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 130kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50  ...

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specifications: capacity: up to 5 m?/h depending on product, suitable to dose up to 10kg/filling | Discharge height: ca. 1.850mm | standard angle: 45? | diameter of pipe: 141mm | Power: 380V, 1.56kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 170kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30- ...

Stock number: D1223, Material: Galvanized, In stock: Yes, Amount in stock: 1 pc., O-profile: Yes, Dimensions: Ø 100 x L 2980 mm., Motor: 1,1 kW, 220/380 Volt, 388 rpm, Dimensions inlet: Ø 150 mm., Dimensions outlet: Ø 150 mm.

Stock number: D998, Screw conveyor, stainless steel,, U-profile., Ø 310 x L 1930 mm., 3 kW gear motor, 61 rpm., 220/380 V., With dosage screw Ø 60 mm., Material: Stainless steel AISI 304, Dimensions: Ø 310 x L 1930 mm.

Stock number: D999, Screw conveyor, stainless steel,, O-profile with inlet hopper., 2,2 KW gear motor,, 220/380 volt., Ø 250 x L 2180 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 2180 mm.

Stock number: D971, Screw conveyor, stainless steel,, o-profile., Ø 170 x L 1580 mm., 1,5 kW gear motor, 71 rpm., 220/380 V., Material: Stainless steel AISI 304, Dimensions: Ø 170 x L 1580 mm.

Stock number: D936, Draining screw conveyor, stainless steel,, Iras type TU, 5,5 kW gear motor., 65 rpm., 400/690 V., Draining screen with, 5 x 20 mm. gap., Ø 400 x 3800 mm., Material: Stainless steel AISI 304, Dimensions: Ø 400 x 3800 mm.

Stock number: D654, Screw conveyor, stainless steel,, O-profile., 2,2 kW gear motor, 70 rpm, 380 V., Ø 250 mm outlet with bag squeezer., Ø 160 x 2050 mm screw., Material: Stainless steel AISI 304, Dimensions: Ø 160 x 2050 mm.

Stock number: D656, Screw conveyor, stainless steel,, BM., 100 l. product funnel with flexible screw., Ø 60 mm., 1,1 kW gear motor, 397 rpm, 380/420 V., Litre: 100 , Material: Stainless steel AISI 304

Stock number: D653, Screw conveyor, stainless steel,, O-profile., 1,1 kW gear motor, 18,8 rpm, 220/380 V., Ø 140 x L 1950 mm snekke., Material: Stainless steel AISI 304, Dimensions: Ø 140 x L 1950 mm.

Stock number: D605, Screw conveyor, stainless steel,, O-profile., Inlet connection branch Ø 230 mm., Outlet connection branch 940 x 250 mm., 1,1 kW, 6,2 - 43 rpm, 220/380 V., Ø 250 x L 1950 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 1950 mm.

Stock number: D609, Screw conveyor, stainless steel,, trough type,, Ø 250 x L 3380 mm., Material: Stainless steel AISI 304, Dimensions: Ø 250 x L 3380 mm.

Stock number: D563, Screw conveyor, stainless steel,, BENA 1996., O-profile, Ø 138 x L 1015 mm., 1,3 kW gear motor., Material: Stainless steel AISI 304, Dimensions: Ø 138 x L 1015 mm.

Stock number: D513, Vacuum screw conveyor, stainless steel,, Gerivac., Ø 150 x 2250 mm screw., 4 hp gear motor, adjustable speed., 22,5 - 158 rpm., Material: Stainless steel AISI 304, Dimensions: Ø 150 x L 2250 mm.

Stock number: D429, Screw conveyor, stainless steel,, O-profile., Ø 210 x L 1500 mm., 0,55 kW gear motor, 52 o/min., 220/380 V., Material: Stainless steel AISI 304, Dimensions: Ø 210 x L 1500 mm.

Stock number: D2025, Screw conveyor, stainless steel,, estimated 1,5 kW motor, 380 volt., U-profile,, Ø 320 x L 1720 mm., Material: Stainless steel AISI 304, Dimensions: Ø 320 x L 1720 mm.

Stock number: D1195, Screw conveyor, stainless steel/steel 37,, u-profile., 1,1 kW. gear motor,, 220/380 Volt., 28 rpm., Ø 230 x L 2000 mm., (Fits SD067)., Material: Stainless steel AISI 304/steel 37, Dimensions: Ø 230 x L 2000 mm.

Stock number: D1181, Screw conveyor, stainless steel,, 0,55 kW gear motor., 121 rpm,, 220/380 Volt., U-type with lid and washing pipe,, obliquely placed on legs., Ø 200 x L 1700 mm., Material: Stainless steel AISI 304, Dimensions: Ø 200 x L 1700 mm.

Stock number: D1154, Screw conveyor, stainless steel,, o-profile., 1,1 kW. gear motor,, 230/400 Volt., Ø 130 x L 3050 mm. screw., Material: Stainless steel AISI 304, Dimensions: Ø 130 x L 3050 mm.

Stock number: D1122, Screw conveyor, stainless steel,, o-profile., 0,37 kW. gear motor,, 380 Volt., Ø 140 x L 1580 mm., Material: Stainless steel AISI 304, Dimensions: Ø 140 x L 1580 mm.

Stock number: D1118, Screw conveyor, stainless steel,, u-profile, with 3 pcs. of removable lids., 0,75 kW. gear motor,, 133 rpm., 220/380 Volt., Ø 125 x L 2500 mm., Material: Stainless steel AISI 304, Dimensions: Ø 125 x L 2500 mm.

Stock number: D1117, Screw conveyor, stainless steel,, u-profile, with lid., Double jacket., Insulated, outer fully welded stainless cladding,, 1,5 kW gear motor., 26,24 rpm., 230/400 Volt., Ø 300 x L 4170 mm., Material: Stainless steel AISI 304, Dimensions: Ø 300 x L 4170 mm.