screw compressor used for sale

BOGE screw compressor Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Screw compressor CompAir Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

For sale is a powerful CompAir Broomwade screw compressor unit (electric motor incl. compressor stage / screw block). Ideal as a spare part, replacement unit for existing industrial plants or for export/repairers. Technical data (according to nameplate): Power: 90 kW Speed: 1,465 rpm (50 Hz) Voltage / Current: 380/415 V | 191/178 A (star/delta circuit) Year of Make: 1996 Degree of protection / frame: IP 23 | Frame C250MC As shown in the pictures, stored on pallet. Incl. suction tube / flexible hoses and device for fastening.

Motor power: 15 kW Nominal flow rate: 1.7 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 1050x700x1050 mm Estimated weight: about 300 kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-3

Motor power: 7.5 kW Nominal flow rate: 1.0 m³/min Maximum working pressure: 10 bar Voltage/Phase: 380V Electrical protection: IP55 Management: Integrated inverter Approximate load dimensions: 900x625x860 mm Estimated weight: about 200 Kg The item is sold in the state in which it is, unverified and without warranty of operation. The sale is subject to acceptance by the seller and may be subject to restrictions, in particular for goods destined for countries to which export is required. Auction-ID: A7-39512-1

Stock No.: 4037 SCREW COMPRESSOR Manufacturer: POWER SYSTEM, Type: EDISON DV 2023 Serial No.: 3499890001, Year of manufacture: 2016 Specifications: Liters per minute Variable 1,8 to 4.15 m/3 Gr. pressure 10 bar Total power 30 kW Voltage 400 volts Dimensions: Length: 835 mm, Height: 1500 mm, Width: 1400 mm, Weight: 650 kg

Screw compressor Käser Air Tower 26 BJ 2000

feed pressure: 9,8 bar : 2,39 m³/min Number of working hours: ca. 85.410 h total power requirement: 15 kW weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Incl. refrigerated air dryer from the manufacturer AIRCRAFT.

Key data: 8 bar, 45000 L/min

RENNER RSF 250 D-7,5D Screw compressor. Oil-Free. Motor power: 250 kW. Air flow: 45,000 liters per min. 45 m3 per min. Working pressure: 7.5 bar. Maximum allowable pressure: 13 bar. Soundproof enclosure. Electronic control with digital display. Fully automatic operation. Serial number: 545073.

Total rated power: 250 kW. Maximum working pressure: 4 bar. Rotational speed: 1,879 rpm. Gross weight: 5,662 kg. Technology: variable speed drive VSD. Air quality: oil-free, ISO 8573-1 Class 0. WEG frequency converter. Serial number: APF239403.

Rotary screw air compressor with SIGMA CONTROL 2 controller and Siemens IE3 three-phase motor. Year of manufacture: 2014 Serial number: 1007 Material number: 101316.1 Rated motor power: 75 kW Maximum working pressure: 8.5 bar Motor voltage: 400 V, delta connection Frequency: 50 Hz Rated motor current: 134 A Motor speed: 2978 rpm Motor protection rating: IP55 Ambient temperature range: +3°C to +45°C Auction-ID: A1-50699-22

Stationary rotary screw air compressor in a metal enclosure. Control panel with start/stop buttons, automatic/continuous operation selector, pressure gauge, temperature gauge, hour meter and intake filter indicator. Auction-ID: A1-50699-23

Key data: 4 , 10

Power requirement: 4.0 kW, permissible Operating pressure: 10 bar

Screw Air Compressor Atlas Copco GA15FF Dryer integrated 15 kW 9.80 bar 2.27 m3/min Year of Make: 2016 Hours: 15,914

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50797-6

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50797-14

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50797-10

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50797-2

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50799-352

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50797-18

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-50799-85

Offer 26316 Screw compressor with integrated refrigerant dryer + air tank Technical data: - SIGMA CONTROL control - Operating hours approx. 22633 h - Load hours approx. 10983 h - Operating pressure 11 bar - Delivery rate 3.5 m³/min. - Engine speed 2960 1/min - Drive 400 V / 18.5 kW - Integrated refrigeration dryer - Space requirement approx. W 800 x D 1650 x H 1550 mm - Weight approx. 650 kg - Oewamat - Compressed air boiler make OKS , 500L , year 2021 - Compressed air filter

Atlas Copco GA45FF (Full Feature) Oil-Injected Screw Compressor with Integrated Refrigerant Dryer, Year of Build 2021 Specifications: Manufacturer: Atlas Copco Type: GA45FF (Full Feature with Integrated Dryer) Year of construction: 2021 Serial Number: API589638 Operating hours: 31,633 hours Hours loaded: 13,950 hours Engine starts: 105,402 Maximum working pressure (MAWP): 8.25 bar Flow rate (FAD): 127.6 l/s (7.7 m³/min) Engine power: 45 kW (61 hp) Engine speed: 2,958 r/min Voltage: 400 V Frequency: 50 Hz Phases: 3 Weight: 900 kg Production site: Made in Belgium (Atlas Copco Airpower s.a.) Features: Integrated refrigeration dryer Full Feature Execution Particularities: Oil-injected screw compressor. The installation is in good operational condition. Compared to the total operating hours, the machine has run relatively few loaded hours. Immediately depl ...

With air dryer 2011 Grassair DB 14; Type DBE 14 serial no. api089490; air dryer on 240v; Compressor with fork lift slots Auction-ID: A1-50864-51

Is set up in container Auction-ID: A1-50864-64

Is set up in container Auction-ID: A1-50864-63

Equipped with oil/water separator; absorption dryer; filter unit; Built-in container (300x242x255cm). Auction-ID: A1-50864-20

Motor power 55 kW (75 hp), with frequency inverter. Operating pressure up to 13 bar and air flow rate up to 10.7 m³/min depending on operating pressure. Designed for industrial compressed air production, with speed regulation to adapt the flow rate to needs. Auction-ID: A1-51273-2

motor power 55 kW (75 hp), with frequency inverter. Operating pressure up to 13 bar and air flow rate up to 10.7 m³/min depending on operating pressure. Designed for industrial compressed air production, with speed regulation to adapt the flow rate to needs. Auction-ID: A1-51273-1

Kaeser BSD 62 screw compressor, year 2002, 7.5 / 10 bar, approx. 6.2 m³/min, 37 kW, Sigma Control. Used, functional and immediately available. Last overhaul and service in 2024. Location: 3525 Lugendorf, Austria.

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Boge, screw compressor type S 15 -Drive power: 11 kW -Volume flow rate: 1.45 m³/min -Max. pressure: 10 bar -Refrigerated compressed air dryer: Type DT 18 -Compressed air tank: Capacity 350 L -Filter: with contamination indicator -Condensate drain: Type CCD 10 -Individual components: see photos -Dimensions: 1870/800/H1560 mm -Weight: 400 kg

Manufacturer: KAESER Kompressoren Model: ES 300 Machine no.: 1.7629.10040 Serial no.: 1002 Year of manufacture: 1999 Type: Stationary rotary screw air compressor Nominal power: 160 kW Motor speed: 1,500 rpm Maximum working pressure: 8 bar Operating hours: approx. 21,344 h Load hours: approx. 15,156 h Equipment: Integrated electric motor Control panel Operating/load hour counters Pressure gauge Sound-insulated enclosure Condition: Used Auction-ID: A1-50932-118

Offer 26334 Technical data: - Operating hours 28407 h - Operating pressure 12.75 bar - Delivery rate 1.95 m³/min - Drive 400 V / 11 kW - Motor speed 3000 rpm - Integrated dryer - Space requirement approx. W 1500 x H 1600 x D 750 mm - Weight approx. 420 kg

with refrigerant dryer, manufacturer Ultrafilter, type: DU0230, serial number: 2200245986, year of manufacture: 2014, connection: 230V, power: 0.92kW. Auction-ID: A1-51529-146

Kaeser M20 PE MOBILAIR – Diesel Screw Compressor – Year of Build 2023 – 82 Operating Hours Technical data: - Manufacturer: Kaeser Kompressoren - Model: MOBILAIR M20 PE - Device type: Mobile screw compressor - Year of construction: 06/2023 - Registration date: 18.07.2023 - Operating hours: approx. 82 h - Serial number: WKA0N0500P9308038 - Engine manufacturer: Kubota - Engine power: 14.7 kW (approx. 20 hp) - Fuel: Diesel - Cylinders: 3 - Max. operating overpressure: 7 bar - Volume flow: 2.0 m³/min - Emission class: Stage V - Sound power level: 97 dB(A) - Permissible total weight: 570 kg - Towing capacity / permissible total weight according to papers: 570 kg Dimensions according to the registration certificate: - Length: 3,190 mm - Width: 1,190 mm - Height: 1,205 mm Equipment: - Mobile compressor unit with single-axle chassis - Trailer coupling with overrun  ...

with Boge Model D29 refrigeration dryer, Landefeld oil-water separator and VIG compressed air tank. Auction-ID: A1-51529-82

Industrial Atlas Copco GA 15 FF enclosed rotary screw air compressor suitable for workshop and production compressed-air applications. The compressor is equipped with an Atlas Copco Elektronikon electronic control panel providing operating status and compressor monitoring. The display powers up in the photographs and shows a system message with a pressure reading of approximately 6.4 bar. The unit is installed with a large galvanized ventilation/extraction hood and connected ductwork above the compressor. Auction-ID: A1-51282-25

Industrial Kaeser rotary screw air compressor, model ASD 47 T SFC, manufactured in 2006. Enclosed stationary compressor equipped with Kaeser Sigma Control electronic controller and integrated frequency-control system. In set with container. Auction-ID: A1-51282-16

Offer 26333 Technical data: - Total operating hours 56167 h - Operating pressure 10 bar - Delivery rate 14.5 l/s - Drive 400 V / 7.5 kW - Space requirement approx. W 950 x H 1250 x D 850 mm - Weight approx. 250 kg

Equipped with Schneider UniMaster ST 270 liter pressure barrel, Schneider DK 985 Eco air dryer and Schneider Öwamat 10 oil-water separator Auction-ID: A1-51062-153

feed pressure:10 bar airflow volume:1,06 m³/min Motor RPM:3920 1/min total power requirement:7,5 kW electrics - voltage/frequency:400/50 V/Hz machine weight approx.:250 kg dimensions L x W x H:1,5 x 2 x 2 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance.

Pipe screw, cement screw used without motor for the conveyance of cement or similar materials with directly attached bearings Total length: 6520 mm Screw aisle length: 6130 mm Screw aisle: 210 mm Shaft of 80 mm, slope progressive at the inlet Opening opposite the driven side: inside 210, flange 280 mm Opening 1 driven side: 250 mm Opening 2 (with lid) diameter: 200 mm Matching motor and overhaul can be offered optionally. Drive via flange motor with coupling

Pneumatic screwdriver, pneumatic screwdriver DESOUTTERDrück air screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4QDreh torque range: 0.6-14.0 NmSpeed: max. 510 rpm. Compressed air requirement: 6 barAir consumption: 8.7 l/sBit input: M6- rotary switch for clockwise and counterclockwise rotation (rotary ring control)- without screwdriver shutdown- compressed air control cable 4 mm- compressed air connection for screwdriver function min. 10 mm- Aluminum bracket for handling device- Screw feeder 12 mm (inner diameter)Dimensions L x W x H

Screws, hex bolts, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hex bolts/cylinder bolts: M10 stainless steel 330 kg -Hexagonal screws: DIN 933 M10 x 100 300 pcs / M10 x 20 4400 pcs -Cylinder head screws: DIN 912 M8 x 35 6600 pcs / M8 x 30 4200 pcs -Material: Stainless steel A2 -Price/Sale: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg

Screws, hexagon screws, flange nuts, hexagon nuts, collar nuts, solar fasteners, cylinder screws -Hexagonal screws/cylinder head screws:M16 / M20 730 kg -Hexagon screws: DIN 931 8.8 M20 x 60 250 pieces / M20 x 55 DIN 933 8.8 4400 pieces. -Hexagon screws: DIN 931 8.8 M16 x 50/22 150 ST -U-washers: Ø 21.0 mm DIN 125 Form B 2100 pcs. -Price: complete -Transport dimensions: 1200/800/H440 mm -Total weight: 730 kg

Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available -Price: per piece -Dimensions: 2090/5460/H2180 mm -Weight: 2180 kg

Used woodworking frame press with 5 frames and 5 clamping screws. Used for gluing and pressing wooden parts during the manufacture of frames and cases, ensuring stable and even bonding of the corners while the glue dries. Ideal for joinery workshops and for the production of window frames and doors. Brand, exact model and further technical specifications (dimensions, weight) are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-34

Stainless steel screw drip – 150 mm / 2,670 mm screw drip used stainless steel screw drip, designed to facilitate devatting and evacuation of the pomace / harvest after fermentation. Compact and easy to integrate into a reception or work area in the cellar, it allows for regular mechanical transfer. Technical characteristics Type: duner / screw extractor Construction: stainless steel screw Function: extraction and conveying of the pomace / harvest to an outlet (press, skip, pump, conveyor, etc.) Receiving tank: optimised inner section to guide the material towards the auger Dimensions Length of the screw: 2,670 mm Inner width of the bin: 195 mm Depth of the bin: 225 mm Total footprint Total length: 3,300 mm Total width: 330 mm Total height: 470 mm Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-363

Spare parts for paper production/spiral conveyors, in stock on wooden frame, 1x approx. 4500 mm length and diameter approx. 400 mm, 1x approx. 4000 mm and diameter approx. 400 mm Auction-ID: A1-51285-363