127,851 used machines on RESALE, but how to find them? Machine Search
Pressure: 7.5 bar Flow rate: 28 lt/sec Power: 11 kw Serial: ARP 73928 Estimated weight: 120 kg Approximate dimensions: 1200x800x1000h mm Auction-ID: A7-44996-11
Silenced screw compressor Power: 30 HP Pressure: 10 bar. Serial: 31006173 Estimated weight: 60 kg Approximate dimensions: 1300x900x1300 mm Auction-ID: A7-44996-10
2-motor compressor with storage tank Estimated weight: 85 kg Approximate dimensions: 1600x700x1400 mm Auction-ID: A7-44996-12
Atlas Copco GA10 air compressor (1994) with Atlas Copco FD30 refrigerant dryer (2002). Auction-ID: A3-43511-17020
Piston compressor; power: 4.1 Kw; maximum pressure: 10 bar; C.S.C. storage tank; capacity: 300 Lt; Pressure: 11 bar. Estimated weight: 200 kg Approximate dimensions: 1200x800xh2150 mm Auction-ID: A7-44996-13
Power: HP 25 - KW 18; Maximum flow rate: 2700 lt/min; voltage: 400 V 50 HZ three phase; Maximum pressure: 10 Bar; belt drive. Serial: 30255729 Estimated weight: 60 kg Approximate dimensions: 1300x900x1300 mm Auction-ID: A7-44996-9
SCREW COMPRESSOR ✔️ Brand: Gardner Denver ✔️ Model: L110RS-13A ✔️ Year: 05/2014 ✔️ Version: V3 ✔️ Fluid: Air ✔️ Power supply: 400V – Three-phase – 50 Hz ⚙️ Key features: Flow rate: ≈ 20.8 m³/min Engine power: 110 kW Speed: ≈ 2980 rpm Weight: ≈ 2770 kg
A deposit of €200.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x MARK RMA15 compressor (2017) Power 3kw 49745 working hours 1x MARK 7122 MK 98 compressor (1999) Power 7.5 kw 16040 working hours 1x MARK MDX 410P dryer (2008) R404A refrigerant Quantity 0!73 kg 1x compressed air tank TER-MEC CORDIVARI RC 07 (2007) Capacity 710 liters Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-18
Alup Piston Compressor - Tank 350 liters - Soundproofing enclosure (68 dB(A) Drive power 7.5 kW Delivery pressure 10 bar Flow rate 815 dm³ /min Total power requirement 7.5 kW Machine weight approx. 0.4 kg Condition: unchecked (6) Auction-ID: A7-45761-885
Piston compressor Output 770l/min Pressure max. 15bar Motor 5.5 KW Speed 800rpm see pictures Auction-ID: A7-45761-806
Max. delivery pressure 10 bar Delivery rate 360 L/min Boiler capacity 100l / 10bar l Machine weight approx. 67 kg. Number of cylinders 2 pcs. Motor 230V / 2.2KW Dimensions L-W-H 1150 x 500 x 650 mm Auction-ID: A7-45761-782
Delivery pressure 8 bar Delivery volume185 L/min Boiler capacity 100 l Number of cylinders 1 pc. Machine weight approx. 100 kg. Dimensions L-W-H 1100 x 500 x 700mm Condition: unchecked (6) Auction-ID: A7-45761-821
Delivery pressure 10 bar Effective delivery rate 252 L/min Boiler capacity 90 l / bar Number of cylinders 1 pc. Motor 400Volt / 1.5KW Speed 777 rpm Machine weight approx. 70 kg. Dimensions L-W-H 0.97 x 0.5 x 0.9 mm Condition: never used / new (5) Auction-ID: A7-45761-768
Power 7.5 KW Pressure vessel 500 L Delivery pressure 14 bar Capacity per litre 995 l Connection voltage 400 V Machine weight approx. 200 kg Space requirement approx. 2.0 x 0.7 x 1.25 m Condition: never used / new (5) Auction-ID: A7-45761-719
Compressor Delivery pressure 8 bar Effective delivery rate 250/350 L/min Boiler capacity 200l / 10bar l / bar Machine weight approx. 105 kg. Number of cylinders 2 pcs. Motor 230V / 2.2KW Dimensions L-W-H 1140 x 510 x 920 mm Condition: never used / new (5) Auction-ID: A7-45761-757
connection: 230 V; description: unused; 4461; Auction-ID: A1-45773-310
Atlas- Copco XATS138, 10.3 Bar, 8M3, Use of Compressed Air and Electricity (MSA), KUBOTO 2403-cr-t-ef02 Diesel Engine Auction-ID: A1-45383-11
Unused; Crate size 1035x415x840mm; 6651 Auction-ID: A1-45773-354
connection: 230 V; description: unused; 4461; Auction-ID: A1-45773-311
Unused; Crate size 1035x415x840mm; 6651 Auction-ID: A1-45773-355
connection: 230 V; description: unused; 4461; Auction-ID: A1-45773-313
connection: 230 V; description: unused; 4461; Auction-ID: A1-45773-312
Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled
Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a thre ...
Technical Specifications & Performance Data Used SIAD Tempo Tehnika 350 Compressor (2004) engineered for reliable high-pressure air supply across beverage production and industrial packaging environments. This second hand unit supports pneumatic demands for filling, capping, labeling, rinsing, conveying, and PET stretch-blow molding within a used bottling line. Manufacturer: SIAD Model: Tempo Tehnika 350 Year: 2004 Drive Power: 75 kW Rated Pressure: 42 bar for high-pressure applications (e.g., PET blow molding) Rotational Speed: 1100 rpm Included Air Dryer: Bode DU 37 type 309 (2006) Compressor Cooler: MTA RWD 150 (2004) Compressed Air Receiver: 1,000 L Operational Status: Ready for operation Safety Features: Included; Manuals: available Air Delivery/Flow: data available on request Electrical: Three-phase industrial supply, 75 kW installed power Application Scope: Supports PET, glass, an ...
Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where th ...
Used Revised Air Compressor CMC CWA11-800 40 bar General Features of the Used Air Compressor CMC CWA11-800 40 bar The Used Air Compressor CMC CWA11-800 40 bar delivers high performance as an oil-free, three-stage unit, ideal for industrial environments that require high-quality compressed air. CMC manufactured this model in 2010 for air compression systems operating at up to 40 bar of working pressure. Since the unit uses dry-running cylinders, it eliminates the need for internal lubrication. Therefore, operators can use it in critical applications where they must avoid any air contamination. Moreover, its robust design ensures long-term durability and operational consistency. Technical Operating Specifications The Used Air Compressor CMC CWA11-800 40 bar operates with three cylinders across two compression stages. It draws air at atmospheric pressure and functions in ambient temperature ...
Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-45832-58
10 bar 220volt air compressor complete with accessories, high-strength hose, pneumatic impact wrench, oil can and Tornador KS Tools, ideal for maintenance, mechanics and car cleaning. Product like new, can be served Loading done by us - 1 pallet L80xw120cm Auction-ID: A1-45489-83
Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 litre tank, digital control panel, inverter for motor management, pressure 8 bar, never used - 0 hours, packed in original packaging Mounted dimensions: 1400 x 800 x 1500 mm Transport dimensions: 1x 1500 x 800 x 800 mm 1x 1200 x 800 x 900 mm Weight: 300 kg Auction-ID: A7-45832-23
Used Compressor Siad 1999 Looking for a reliable compressor to meet your high-pressure needs? We have just the machine for you: a SIAD MS2/1242-B2 compressor, manufactured in 1999, with only 238 operating hours. This compressor is an excellent choice for those requiring powerful, dependable, and high-pressure-capable machinery. The SIAD is equipped with a single stage and delivers a pressure output of 50 bar, with a power output of 299.9 kW. It’s ideal for heavy-duty, high-pressure applications in a range of industrial processes. The compressor comes with built-in safety features, and manuals are provided for troubleshooting if required. This compressor is currently in storage and has been well-maintained. With dimensions of L: 5900 mm, W: 3000 mm, H: 2500 mm, it fits well in any industrial space. It is a versatile machine that can handle various applications, making it suitable fo ...
We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here
We can offer you all types of screw making machinery for M3 - M25
M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW
Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25
Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
The TCAP 47 Applicator is one of the high quality closing solutions.Additional with Filler and PT one of the most usual opening and closing Solutions. The TCAP 47 combines a high quality opening and closing solution at high standart and compfort in daily use.
new and origin packed set of screw and barrel for Reifenhauser extruder, model RT5801-1-150-30, screw diameter 150 mm - 30 l/d
Make: Allweiler Type: SZBP 100.1 E 11 P01 No.: 7602467 Q = 5-25 l / min = 300-1500 l / h n = 40-140 min-1 Year of construction: 1995 Condition very good Spare parts: 1 stator speed-controlled drive North Type: SK255F AL-R1500-100 L / 4E Dimensions: LWH = 1400x300x650mm Weight: approx. 120 kg
Type: SNZP 380.1 HX1P11 Year of construction: 1998 No. 7610158 Q = 30/167 l / min N = 60/220 l / min Drive North in EEx II Capacity: 3.3 kW, 400V Drive North N1-n2 = 33-258 min-1 Type: SK 33-R1960-112 M / 4 ED Dimensions: LWH = 2300x420x500mm Weight: 250 kg
Precision ball screw drive, KGT 40mm, Gewindelg 1735mm, Steinmeyer, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - Precision ball screw / ball roller spindle with nut - Nominal thread diameter 40mm, pitch 10mm, - total length: 1920mm, 17kg, - ball screw length: 1735mm shaft end 1: 115mm lg - D22 x 40mm lg, thread M30 x 1,5 x 21mm lg, D30 x 54mm lg shaft end 2: 70mm lg - thread M25 x 1,5 x 20mm lg - D25 x 50mm lg Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device ...
maximum number of results exceeded
please refine your search
150 € 
