screw compressor used for sale

Refrigeration compressor, compressor for medium temperature range MANEUROP MT 125 HU 6D ( MT125HU6D ) I max: 43 A 220 V 3AC approx. 2.2 m connection cable used, tested ! Dimensions: 400 x 400 x 600 mm

Compressor RIETSCHLE DFT 500 (22) ( DFT500(22) ) Article no.: 102109-2224 500 m3/h 0.9 bar motor: 22 kW 380 / 660 V used, tested ! Dimensions: 1520 x 1050 x 1300 mm

Oil tank for compressor system ALUP / BWB 228 00249 ( 22800249 ) SPH265HH Bj.; 1997 used, tested ! Dimensions: 1800 x 900 x 1650 mm

2019 Aerzen D52S Rotary piston compressor Find more here - / Contact us at -

Key data: 11 , 1 , 250

Claw compressor Gardner Denver ( Elmo Rietschle ) C-DLR-250, UNUSED. Capacity 250 m3 / hour; 11 kW; EX motor; maximum pressure 1,8 bar; 2950 round per minute; Dimensions L 1450mm, H 1100mm, W 950mm Electric connection 400 V

CECCATO CSM 5.5 X mini screw compressor Power 4kw Working pressure 10bar Capacity approx. 470l/min Noise level 62dB Dedicated dehumidifier Air tank 270l

Turbo Tech Centrifugal Air Compressor Model: Til-4800 Compressor Stage: 3 Flow Rate: 80 m3/min Coupling Power: 374 kW Electric Power: 415V/50Hz/3Ph, IP23 Motor IE Standard: IE3 Motor type: ODP Inlet condition: 1.013barA, 35°C, Humidity 80% Main Motor Manufacturer: SIEMENS Motor Starter: Inverter Starter with Synchronous Bypass Service factor: 1.0 Air and Oil Cooling pipe material: Copper-Nickel For any inquiries, please contact: 1. email: zulaika.kamarudinn@gmail / rozitah@topglove.com.my 2. Contact Number: i. Ms. Zulaika: 012-9037331 ii. Ms. Rozitah: 018-2814801

Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; Air flow rate 25/30 m3/h; Pressure 600/600 mbar; new slats; installed in Foliant Taurus 530. Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; air 25/30 m3/h; pressure 600/6000 mbar; with new blades; used for Foliant Taurus 530.

Key data: 75 , 13 , 15

Screw compressor, 500 V drive, was serviced by Atlas Copco in 2020 and has been out of service since then. Accessories (absorption dryer, refrigeration dryer, oil/condensate separator) available for an extra charge.

Atlas Copco ZT30 Air compressor Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank

Key data: 73 , 3

Screw compressor, 500 V drive, serviced

Cooling compressors set Bitzer Type: 4VHC-10K-40P (x4) Volume: 28.9 m3/h (x4) Refrigerant tank and control panel in set Cooling capacity for CO2: 328 kW at -25°C/40°C, 267 kW at -30°C/40°C Dimensions: 3400 x 1600 x 2200 mm Control panel dimensions: 2520 x 500 x 2270 mm Items in magazine: 1 Reference number: Z95 Condition: Used in good condtion Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: HSK8571-140-40P (x2) Volume: 410 m3/h (x2) Control panel included Cooling capacity for R404A: 574 kW at -5°C/40°C, 470 kW at -10°C/40°C Dimensions: 2650 x 1750 x 2200 mm Control panel dimensions: 2500 x 2200 x 2350 mm Items in magazine: 1 Reference number: Z96 Condition: Used in good condition Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: 4HE-18Y-40P (x2), 4H-15.2Y (x1) Volume: 73.6 m3/h (x3) Cooling capacity for R404A: 153.2 kW at -5°C/40°C, 126.3 kW at -10°C/40°C, 65.5 kW at -25°C/40°C Dimensions: 2600 x 950 x 1970 mm Items in magazine: 1 Reference number: Z90 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: 6J-22.2Y (x1), 6JE-25Y-40P (x2) Volume: 95.3 m3/h (x3) Cooling capacity for R404A: 191.1 kW at -5°C/40°C, 156.3 kW at -10°C/40°C, 78.4 kW at -25°C/40°C Dimensions: 2700 x 850 x 1950 mm Items in magazine: 1 Reference number: Z89 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: HSK 8551 110-40P (x3) Volume: 315 m3/h (x3) Cooling capacity for R404A: 662 kW at -5°C/40°C, 539 kW at -10°C/40°C Dimensions: 3900 x 1700 x 2350 mm Items in magazine: 1 Reference number: Z94 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: HSK 6461-60-40P (x3) Volume: 165 m3/h (x3) Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Refrigerant tank in set Items in magazine: 2 Reference number: Z77 Condition: Used in good condition Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Refrigerant compressors system Bitzer Type: 4VCS-6.2Y-40P (x2) Volume: 34.7 m3/h (x2) Cooling capacity for R404A: 44.4 kW at -5°C/40°C, 36.5 kW at -10°C/40°C, 18.5 kW at -25°C/40°C Dimensions: 2050 x 750 x 850 mm Items in magazine: 1 Reference number: Z99 Condition: Used in good condition Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Elmo G 200 Side Channel Compressor 8.5kW 2915rpm Unused Replacement Machine Weight approx. 180kg The cover on the engine at the rear is missing. unused replacement device. Was in stock, in case the first machine should fail. From insolvency

Kaeser compressed air tank 3000 liters approx. 3 meters high

Key data: 160 , 8 , 1170

For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037

Key data: 250 , 8 , 2322

For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg

4x CSW8593-125Y-40P screw compressors, two of which served as replacements, so NEW and not yet in use.

Bitzer semi-hermetic compressor 4FES-3Y-40S 400V Condition: unused Displacement (1450 RPM 50Hz) 18.05 m3/h Displacement (1750 RPM 60Hz) 21.78 m3/h Well. of cylinder x bore x stroke 4 x 41 mm x 39.3 mm Weight 90 kg Max. pressure (LP/HP) 19 / 32bar Connection suction line 22 mm - 7/8'' Connection discharge line 16 mm - 5/8'' Oil type R134a/R407C/R404A/R507A/R407A/R407F BSE32(Standard) | R134a tc>70°C: BSE55 (Option) Oil type R22 (R12/R502) B5.2 (Option) Oil type R1234yf BSE32 (Standard) | R1234yf tc>70°C : BSE55 (Option) Oil type R1234ze BSE55 (Standard) | to>15°C: BSE85K (Option) | tc>70°C: BSE85K (Option) Ölfüllung R454C/R455A BSE32 (Standard) 1pc in stock

Sullar Screw Compressor Volume Flow 6.29 cbm Operating hours 31690 Motor power 45kw

Type: FRIGoPACK FPL150G var Serial number: 12842 Year of construction: 2013 Refrigerant: NH3, R717 Compressor: GEA Grasso PR-P55S-28 Flow rate: 966 m3/h Working pressure: max 21 Bar Power: 3 x 380V, 60Hz, 162kW Dimensions: 5000 x 2200 x 2450 mm Weight: 5400 kg

ID3529 Atlas Copco XRHS366CD year/Baujahr 2006 approx. 4370 hours/hours Compressor with 20 bar and 20 m3/min Compressor with 20 bar and 20 m3/min

Compressor AIRCRAFT ACS Duo -used screw compressor, incl. refrigerant dryer, incl. condensate conditioner, automatic steam trap ---------- Technical data ---------- container size: 2 x 100 litres, Flow capacity: 360 litres, Maximum pressure: 10 bar, Engine: 4.0 kW, Speed: 2,880 rpm, Sound pressure level: 69 dB, Dimensions (LxWxH): 1,200 x 900 x 1,250 mm, Weight: 201 kg Quality info: - Complete basic cleaning - Electrics checked - immediately ready for use

Sell several CO2 compressors, in good working order. Make bid for the lot

A very clean and working vacuum compressor. 2m3 per hour, 0,85 bar. One faze 220 V. Can ship worldwide.

Compressor, compressor two-stage type S6H-20.2Y, displacement 73 m3/h For blast freezers or deep freezes. Needed two pcs., checked in stock.

Refrigerant compressors system Bitzer -Type: 6H-25.2Y-40P (x7), 6HE-28Y-40P (x1) -Volume: 110.5 m3/h (x7), 111 m3/h (x1) -Cooling capacity for R404A: 605 kW at -5°C/40°C, 500.8 kW at -10°C/40°C, 260 kW at -25°C/40°C -Dimensions: 5100 x 800 x 1850 mm -Items in magazine: 1 -Reference number: Z 101 -Condition: Used in good condition

serial number: 2313 control: SAM 8/4 rated current: 0,7 - 0,35 A frequency: 60 Hz : 100-240 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 120/220 L/min Receiver capacity: 50l / 10bar l / bar weight of the machine ca.: 24 kg. Number of cylinders: 1 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 1,1 x 0,32 x 24 mm This compressor comes standard with: - Maintenance-free oil-free engine. - Safety valve. - Reduction valve with pressure gauge and coupling. - Drain cock on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 125/85 L/min Receiver capacity: 24 / 8 l / bar weight of the machine ca.: 22,5 kg. Number of cylinders: 2 Stk. motor: 230V / 0,75KW V / KW range L-W-H: 600 x 310 x 510 mm Exhibition machine This oil-free and compact Hyundai compressor has a low weight and super-quiet operation. Very quiet, about 53-60dB (Suitable for indoor use) Equipped with: ? safety valve. ? Pressure regulator with pressure gauge and coupling. ? Drain valve on the tank. ? Humidity separator. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 13 bar Effective free air delivery: 690 L/min Receiver capacity: 270l / 16bar l / bar weight of the machine ca.: 199 kg. motor: 400V / 5,5KW V / KW range L-W-H: 1,7 x 0,6 x 1,27 mm It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 250/350 L/min Receiver capacity: 200l / 10bar l / bar weight of the machine ca.: 105 kg. Number of cylinders: 2 Stk. motor: 230V / 2,2KW V / KW range L-W-H: 1140 x 510 x 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 500 L feed pressure: 14 bar liter capacity: 995 l connected load frequency: 400 V weight of the machine ca.: 200 kg dimensions of the machine ca.: 2,0 x 0,7 x ,125 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete Boge compressor system with a capacity for 16 compressors with a central control system is available. 1) Boge SLF 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4700kg. 2) Boge S 271 screw compressor, capacity: 30.5m³/min, cooling air volume flow: 5000m³/h, drive motor: 200kW, weight: approx. 4500kg. 3) Boge S 180 screw compressor, capacity: 20.8m³/min, cooling air volume flow: 5000m³/h, drive motor: 132kW, weight: approx. 3200kg. 4) Microfilter Boge FFP 250. 5) Refrigeration compressed air dryer Boge DS 460, capacity: 46m³/min, max. operating pressure: 14bar, weight: approx. 500kg. 6) Refrigeration compressed air dryer Boge DS 260, capacity: 20.8m³/min, max. operating pressure: 14bar, weight: approx. 240kg. 7) Boge tank, volume: 5000l, max. tank pressure: 11bar, weight: 1200kg. 8) Condensate cleaning  ...

There are 3x Kaeser compressors, 2x Atlas Copco compressors and 3x Kaeser refrigeration dryers available. 1) Compressor Kaeser CS 75, year of manufacture: 1992, operating pressure: 10bar, operating hours: 38265h. 2) Compressor Kaeser AS 44, year of manufacture: 1999, operating pressure: 8.5bar, operating hours: 41564h. 3) Compressor Kaeser BS 60, year of manufacture: 1983, operating pressure: 7.5bar, operating hours: 50674h. 4) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 26831h. 5) Compressor Atlas Copco GA 45, year of manufacture: 1990, operating pressure: 10bar, operating hours: 52447h. 6) Refrigeration dryer Kaeser TD 51, year of manufacture: 1997, refrigerant: R22. 7) Refrigeration dryer Kaeser TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Refrigeration dryer Kaeser TE 76, year of manufacture: 1996, refrigerant: R22 ...

An Atlas Copco oil-free compressor is available.Technology: oil-free scroll compression, max. operating pressure: 7.8bar, volume flow: 13.4l/s or 48.2m³/h, motor power: 7.4kW, speed: 2885rpm, machine dimensions X/Y/Z: approx. 1600mm/750mm/1850mm, machine weight: approx. 400kg.

Three Remeza compressors and a Haro feed pump are available. 1) Remeza Remcomp SB4/C-100, year of manufacture: 2011, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 2) Remeza Remcomp SB4/C-200, year of manufacture: 2012, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 3) Remeza BK7, year of manufacture: 2008, type: screw compressor, output: 700l/min, max. operating pressure: 10bar, power: 5.5kW. 4) Haro GF feed pump, year of manufacture: 2020.

A Renner compressor and Donaldson ALD 0300 ultrafilter are available. 1) Compressor Renner RSK-Pro 2-30, year of manufacture: 2019, max. pressure: 10bar, volume flow: 4610l/min, power requirement: 30kW, machine dimensions X/Y/Z: approx. 1630mm/820mm/1630mm, operating hours: 16276h. 2) Ultrafilter Donaldson ALD 0300, year of construction: 2019, operating pressure: 4bar-16bar, drying technology: cold regenerating adsorption. Including pressure vessel BWB, volume: 64l. Documentation available. On-site inspection is possible.

Volume flow: 650l/min, motor power: 5.5kW, tank volume: 350dm³, operating pressure: 10bar. On-site inspection is possible.

A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.

Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.

A Kaeser compressor, a Kaeser refrigeration dryer and an ABB DC motor are available. 1) Oil-lubricated screw compressor Kaeser SM 11, year of manufacture: 1998, serviced: 2023, operating pressure: 10bar, volume flow: approx. 1100l/min, power: 7.5kW, machine dimensions X/Y/Z: approx. 600mm/650mm/850mm, weight: approx. 200kg. 2) Refrigeration dryer Kaeser TA 5, year of manufacture: 2012, serviced: 2023, refrigerant: R134a, operating pressure: 16bar. The condensate drain is defective. 3) DC motor ABB DMP 180-4LB, year of manufacture: 1998, power: 114.7kW, speed: 1800rpm, operating mode: continuous operation, insulation class: H-Rise F, weight: approx. 450kg. On-site inspection is possible.

RTI mobile electric compressor unit 45kW Use "RTI builds the electric compressor unit as a ready-to-use unit. It is used for the oil-free compression of atmospheric air and is used for the pneumatic conveying of bulk materials. " Heavy Duty Mobile Compressor 45KW Dimensions: Length 200cm; Width 100cm; Height 105cm including instructions for use and operation used condition, see pictures Contact/questions please contact Mr. Baur directly: +49 172 7666071 Pick-up in D-88471 Laupheim-Bihlafingen Under exclusion of any warranty. All information without guarantee.