screw compressor kaeser used for sale

Package - Kaeser KW 11 - KW 250

Atlas Copco/Kaeser Package KW 11 - KW 250

200 kW, max. 10 bar, 32,7 m3/min.

110 kW, max. 8 bar, 15,5 m3/min.

132 kW, max. 7,5 bar, 22,74 m3/min.

110,0 kW, 7,50 bar, 21,90 m3/min

75,0 kW, 7,5 bar, 11,30 m3/min

500 kW, max. 7,5 bar, 83,1 m3/min, oilfree, in very good condition, with matching dryer Atlas Copco MD 1800.

Manufacturer:ZM Zwickauer Maschinenfabrik Year: 1993 Power: 30 kW Allowable Operating Pressure: 8 bar Rotation speed: 5870 1/min Technical data of supply fan: Manufacturer: ILKA VEB Turbowerke Meißen Type: Lann 500 Year: 1991 Weight: 28 kg Flow: 1,43 - 1,94 m^3/s The total increase in pressure: 358 - 177 Pa Fan rotation speed: 1450 1/min Power: 0,7 kW Technical data of motor: Manufacturer: VEM Elektromotorenwerke Thurm Type: YP 1G4 Rotation speed: 1380 obr/min Power: 0,75 kW Voltage supply: 220/380 V 50 Hz The current consumption:3,45 / 2,0 A Weight: 11 kg Technical data of transformer: Manufacturer: TuR Transformatoren und Rontgenwerk Type: SVS 372 Year: 1991 Power: 37 kW Voltage supply: 380 V Control voltage: 220 V Nominal current: 72 A

Compressor valve in Exchange

; good

UniMaster STS, the space-saving solution with a standing container! Standard with all fittings, such as an electromagnetic valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensation tap and shut-off valve V-cylinder driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency. Intermediate and aftercoolers ensure a rapid cooling of the generated compressed air Large fan flywheel for optimal cooling With refrigeration dryer and bypass line With complete module Öwadry, consisting of: refrigeration dryer, pre-filter and oil-water separator (only for DKS version) Safety tub optionally available Technical data: - Pressure 10 bar - intake capacity 660 l/min - eff. Delivery quantity 520 l/min - drive power 4.0 kW - speed 1025 rpm. - Container vol ...

132,0 kW, max. 8,50 bar, 23,81 m3/min.

200,0 kW, max. 9,0 bar, 32,60 m3/min. Motor: 400V/50Hz, 460V/60Hz.

Compressor Bitzer 4FE-28Y-40P

Compressor Bitzer 6JE-33Y-40P

Compressor Bitzer 4FE-35Y-40P

Compressor Bitzer 6J-33.2Y-40P

Compressor Bitzer 4VES-10Y-40P

Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Refurbished Pharmapaktor APC L200/50. The machine was previously used as a demo and rental unit. Compacting head Two cast stainless steel H-frames connected by spacer bolts. Two laterally foldable swing arms for easy and quick changing of the rollers. The swing arms are fixed with two tie rods, which also absorb the compressive forces of the compacting rollers. One chamber insert for guiding the product flow and two center pieces for sealing the roll ...

Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 t dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Polystyrene compressor Styropactor NANO | Polystyrene press for polystyrene EPS Polystyrene compressor. Combination of shredder and press for polystyrene, EPS polystyrene beetle NANO 1-phase Commodity code 42020 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 10-15 kg/h Throughput in fish crates with lid measured 650 grams per piece and about 800x400x220mm): 10-15 boxes/pc Wet boxes: YES Stainless steel version: YES 40'HC container YES Mobile version (with wheels): YES Density (after compaction): 200-500 kg/m³ Connection: 1.5kW, 1-phase, 230/110 V, 50-60Hz Insertion opening: 300×490 mm Length: 1850 mm Height: 1400 mm Width: 660 mm KBM Styroverdichter reduce the volume of EPS (STYROPOR) by about 20-40 times with dry and moist material (including fish crates) The NANO is suitable for industrial use and smaller volumes and quantities. Al ...

Polystyrene compressor Styropactor MICRO | Polystyrene press for polystyrene EPS Polystyrene compressor. Combination of shredder and press for polystyrene, EPS MICRO 1-phase Commodity number 42025 Throughput: With fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Density (after compression): 175-225 kg/m³ Connection: 1.5kW, 1-phase, 230/110 V, 50-60 Hz MICRO 1F-3-phase Commodity number 42026 Throughput: With fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Density (after compression): 250-350 kg/m³ Connection: 2.2kW, 3-phase, 400 V / 50 Hz, 480 V / -60 Hz Wet boxes (yes): YES Stainless steel version: YES Mobile version (wi ...

Styrofoam compressor Styropactor MINI | Polystyrene press for polystyrene EPS Polystyrene compressor. Combination of shredder and press for polystyrene, EPS MINI 1-phase Commodity number: 42030 Throughput with fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h. Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Boxes/ST Density (after compression): 175-225 kg/m³ Connection: 1.5kW, 1-phase, 230/110 V, 50-60 Hz Insertion opening: 400×780 mm Length: 2220 mm Height: 1600 mm Width: 630 mm MINI 1F-3 phase Commodity number: 42032 Throughput with fish crates of 25 KG/M3 Material space weight EPS measured: 15-20 kg/h. Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 23-30 Boxes/ST Density (after compression): 250-350 kg/m³ Connection: 2.2kW, 3-phase, 400 V / 50 H ...

Key data: 4

Renner piston compressor RIKO 700/270 ST KT Product name: Piston compressor Model: RIKO 700/270 ST-KT Manufacturer: RENNER Device Number: 1008851 Product number: 04837 Year of construction: 2021 Condition: As good as new technical details: Effective delivery quantity: 570 Container capacity: 270 Ltr. Intake capacity: 700 l/min Maximum pressure: 10 bar Sound pressure level LpA: 78 dB(A) Cylinders/steps: 2/2 Weight: 227 kg Temperature range: -10°C to +80°C 1 x pressure gauge tank pressure automatic pressure switch 1 x manual condensate drain by ball valve incl. refrigeration compressed air dryer RKT +0035 (refrigerant 134a) incl. automatic steam trap D03 for the compressor Stand-standing unit with rubber feet Engine data: Motor power: 4.0 KW Power supply: 400 V / 50 Hz Speed: 940 rpm Transport dimensions: L x W x H: 1,490 mm x 506 mm x 1,323  ...

Compressor Make: BITZER Type: OSN7461-K Conveyor volume: 110-303 m3/h Speed: 1450-4000 rpm. Electric motor: 2900rpm Make: SCHORCH Type: KF5200L-AB019-06T IEC 200L IMB3 Power: 55 kW Price on request Contact details can be found under Contact

Product name: Compressor Manufacturer: Kaeser Type: EPC 340-100 Article number: 1.5746.7 Year of construction: 2011 Condition: in good used condition, checked technical details: operating pressure: 10 bar • Delivery quantity: 230 l/min (6 bar) • Speed: 1,500 rpm • Container: 90 l • Weight: 73 kg without consoles (per console 15.0 kg) • Sound pressure level dB(A): 73 Engine data: • Motor: 400 V, 1.7 kW Metrics: L x W x H: 1,120 x 350 x 910 mm Transport dimensions: • L x W x H: approx. 1,200 x 800 x 1100 mm • Transport on pallet: 1,200 x 800 mm Our price: 839,00 € (EUR) FP plus VAT from location Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Attachment: Schneider air compressor Compressor: UNM STV 460-10-200 t no.: T800-140 Suction power: 460 l / min EFF. Quantity: 375 l / min Final compression pressure: 10 bar Rated motor power: 3 kW Voltage: 400 v Frequency: 50 Hz Year of construction: 2008 Condition: mint condition - very good

BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ß, good condition.

Voltage: 230/400 V Compressor FRASCOLD type D 315 power 15.36 m3 / h Evaporator GEA Küba type DZB 071 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: BITZER Type: 6H-35.2 Conveyor volume: 110.5 m3/h Speed: 1450 rpm New Price on request

Make: BITZER Type: 6F-40.2 Y Conveyor volume: 151.6 m3/h Speed: 1450 rpm Price on request

Air compressor

Used compressor made by ABC 4HA-4-LT, new 1997, capacity 7.8 m3 / min. Dimensions: 2100x4000x2500 mm. The compressor consists of: cooler AIRSEC AW-750010/10, new 1997, capacity 7.5 m3/h, cold dryer AIRSEC FD10B/E new1997, capacity 300 m3/h

water cooled , 2 KW , 400 PSIG ,

Make: BITZER Type: 6G-30.2Y-40P Conveyor volume: 126.8 m3/h Speed: 1450 rpm Price on request

Machine type compressor Birkenstock brand Type K8 / 40 / 230 Connection voltage 1 x 230 Volt Version mobile version Fuse 16 amps Dimensions L x W x H 1,120 x 400 x 760 mm Weight 60 kg Age 6 months Condition very little used Boiler capacity 40 liters intake capacity 250 litres/min. delivery quantity 175 litres/min pressure 10 bar Cylinder 1 piece Original price incl. water separator 1.035,00 € + VAT Price incl. water separator from stock Munich 895,00 € + VAT Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 10 mtr. long, ready to connect 34,80 € + VAT Sach-Nr. S-50.98.10 Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 25 mtr. long, 9 mm Ø 61,10 € + VAT Sach-Nr. S-50.98.25 Compressed air hose, incl. plug-in sleeve and quick coupling, 9 mm Ø 50 mtr. long, 9 mm Ø 104 ...

Compressor KAESER Year of construction: 1992 Output: 37 kW Vol. -power: 5.25 m ^ 3/min Operating pressure: 10 bar

Compressor Bitzer Two-stage New Type S6F-30.2Y-40P Stroke volume 101m3/h Power 30Kw at minus35C Evaporation temperature 25Kw at minus40C Sale price €8,650,- Sale price €9,880,- (mounted with subcooler and insulated) Info: 0043-6641838175 or info@frigocom.at

Offered a replacement level is as good as new.

Stationary air compressor Lutos Oil-free air blower Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biała USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

Make: Danfoss Type: SZ100S4VC Performer New Vacuum: - Pressure: 25bar - Temperature max: 54C - Temperature min.: -35C - Volume: 31 litres Overpressure: - Pressure: 32bar - Temperature max: 65C - Temperature min.: -35C - Volume: 3.25 litres

Make: BITZER Type: 44VCS-12.2Y-40P Tandem compressors 2 Compressors Type: 4VCS-6.2Y-40P Conveyor volume per compressor: 34.7 m3/h On metal scaffolding Price on request

Post new parts for reciprocating compressors MAHLE LIKO 3.0 AL 30 HP / 10 bar / 3 m / min flow rate, cylinder, piston, pressure relief valve, non-return valves, hoses, filters, seals etc Only completely, 1199 shipping only by forwarding preference possible, pick up, Stacker to recharge available

Just arrived, tested and ready for sale: high-quality package of BOGE compressors and dryers in very good condition and few hours.

Just arrived, checked and ready for sale. Nice Package of used BOGE air compressors and dryers in excellent condition and low working hours.

Description Brand Pro Froid Model Copeland Scroll ID SH4797 Status Active Year of manufacture 2010 Location Bucure?ti / Bucharest (RO) Old price: 13 500 Euro. 1. Refrigeration and Climate Circuit 1.1. Pro Froid (Franta) GC4/CCR3SH 4PCS15ZC/SC Packed air cool condensing unit: • 3 pcs. Semi-hermetic Piston Bitzer 4PCS 15.2Y compressors • 3 pcs. crankcase heater • 1 pc. Liquid receiver • 1 pc. HP and LP safety pressure switches • 3 pcs. HP safety pressure switches • 3 pcs. LP safety pressure switches • 3 pcs. electric panel boxes – IP 54 • 3 pcs. electrical engine protection devices • 3 pcs. Mounted valves on compressors • 1 pc. Automatic electric panel • 1 pc. oil management system 1.2. Electric and control panel 1.3. air cooled condenser S060 3MSC 6PH/6PL SV 1.4. Helpman / Alfa Laval coolers / ventilators / fans – 17 pcs. 1.5. Electri ...