screw compressor atlas used for sale

\" Mahr Inner Micrometer Set 50–600 mm · 0.01 mm · Internal Gauge · in a wooden box Mahr inner micrometer set for precise internal measurement of diameters and bores in the range of 50 to 600 mm.Scope of delivery • 1× Mahr micrometer head 0–50 mm • Extensions 50 / 100 / 150 / 200 mm • 1× adjustment dimension 50 mm • 1× original wooden box (scope of delivery exactly as shown) Condition • Used • Measuring surfaces visually good, no breakouts recognizable • Manufacturer: Mahr (Carl Mahr / Mahr GmbH) • Type: internal micrometer / internal measuring screw set • Measuring range: 50–600 mm • Reading: 0.01 mm • Design: mechanical • Standard temperature: 20 °C • Calibration note: older test sticker available (07/2015) \" Auction-ID: A7-46417-157

\" 3-point internal measuring screw Measuring range: 225–250 mm Version: analogue Manufacturer: not clearly marked Accessories: Adjustment ring Ø 250 mm (marking \"250 C\"), original case, instructions, adjustment tool (screwdriver) 3-point internal measuring screw for the measuring range 225–250 mm including matching adjustment ring Ø 250 mm. The measuring device is located in the original case with foam insert. An operating manual for three-point internal measuring screws (analogue/digital) is included. Condition: Used. Visually good condition with slight signs of wear. Calibration sticker available, but no current calibration documented. Functional test not carried out. • 3-point internal measuring screw 225–250 mm • Adjustment ring Ø 250 mm • Original case • Instructions \" Auction-ID: A7-46417-121

\" Digital Screw Gauge 275–300 mm with Adjustment Dimensions Manufacturer / Type: Mitutoyo Code No. 293-558-30 Model MDC-300M Digital micrometer from Mitutoyo in the measuring range 275–300 mm. Version with ABSOLUTE measuring system and digital display unit. Solid, torsion-resistant light alloy bracket with heat-insulating handle. Digital display with preset and zero/ABS function. Delivered in the original Mitutoyo wooden box including setting standard and documents as shown. Optically good used condition. Wooden box with usual traces of storage. Measuring surfaces and spindle optically clean. • Measuring range: 275 – 300 mm • Resolution: 0.001 mm • Measuring system: ABSOLUTE digital • Display: LCD • Functions: Preset / Zero / ABS • Manufacturer: Mitutoyo • Origin: Made in Japan • Code no.: 293-558-30 \" Auction-ID: A7-46417-276

\" Mitutoyo Digital Gauge 0–25 mm, 0.001 mm Digital U-Screw Gauge for external measurement in the range of 0–25 mm. Reading 0.001 mm. With ZERO button to set zero points. Device in used condition with visible signs of wear on the housing (including paint chipping and marking residues). Measuring surfaces optically in neat condition. Supplied in a plastic case with foam insert. • Manufacturer: Mitutoyo • Design: digital external measuring screw • Measuring range: 0–25 mm • Reading: 0.001 mm • Display: LCD digital • Functions: ZERO (zeroing) • Unit of measurement: mm • Measuring surfaces: carbide-tipped • Reference temperature: 20 °C \" Auction-ID: A7-46417-330

\" Bundle of micrometers 0–50 mm – 7 parts – mechanical – used 7-part bundle of mechanical micrometers for external measurements in the range of 0–50 mm. • Total measuring ranges: 0–50 mm • Reading: 0.01 mm • Type: mechanical • Version: metric • Scope of delivery: 7× micrometer \" Auction-ID: A7-46417-220

\" Mitutoyo U-gauge 75–100 mm – 0.01 mm – type OM-100 – in the case U-screw gauge from the manufacturer Mitutoyo, type OM-100. The measuring device covers the measuring range 75-100 mm and has a reading of 0.01 mm. • Manufacturer: Mitutoyo • Type: OM-100 • Measuring range: 75–100 mm • Reading: 0.01 mm • Version: mechanical, metric • Ratchet: available Auction-ID: A7-46417-215

Lot: 7 measuring equipment – U-touch screws, precision measuring devices, depth measuring screw, internal measuring device Lot of 7 used precision measuring instruments in wooden or plastic boxes. According to the imprint, the manufacturer is mainly Steinmeyer, Feinmesszeugfabrik Suhl, and Mitutoyo. Included measuring instruments: Screw gauge Steinmeyer, 0–25 mm, precision dial gauge bow screw, Steinmeyer, 25–50 mm, precision dial gauge U-clamp Steinmeyer, 20–45 mm, precision dial gauge / special jaws U-clamp screw Feinmesszeugfabrik Suhl, 0–20 mm, precision dial gauge (TGL 20250) Depth gauge Suhl, 0–150 mm, incl. extensions (No. 650) Mitutoyo U-measuring screw, 0–25 mm, 0.01 mm reading Internal gauge set with several attachments and extensions. Condition: Used, functional as far as verifiable. Auction-ID: A7-46417-27

\" Inner measuring screw set (2-point contact) from GDR industrial production, manufacturer Suhl. Measuring range from 60 to 900 mm is covered by several extensions. The reading is done mechanically with 0.01 mm pitch. An original test certificate from HITEC Messtechnik is available. The test was carried out in accordance with DIN 863 Part 4, and the examinee was assessed as fit for use. The test certificate is historical and serves as proof of the previous calibration:Scope of delivery • Measuring head internal measuring screw • Extensions / intermediate pieces according to measuring range • Original wooden case • Original test certificate (HITEC measurement technology) Condition • Used, age- and use-related traces of use • Scales easy to read • Mechanics functional • Manufacturer: Suhl • Design: Internal measuring screw, 2-point contact • Measuring range: 60� ...

\" Item (2x) Outer micrometer 125 - 175 mm 1st outer micrometer 125–150 mm Manufacturer / Type: Feinmesszeugfabrik Suhl (GDR) Size 150 mm Analog shackle measuring screw for external measurement in the range 125–150 mm.Solid cast iron bracket with hammered finish. With locking lever and ratchet. Delivered in the original wooden box. Typical industrial version from GDR production. Used, neat condition. 2. Outer micrometer 150–175 mm Manufacturer / Type: Feinmesszeugfabrik Suhl (GDR) Size 175 mm Supplied in wooden case. 1st outer micrometer 125–150 mm • Measuring range: 125–150 mm • Reading: 0.01 mm (typical design) • With ratchet • With locking lever • Wooden box 2nd outer micrometer 150–175 mm • Measuring range: 150–175 mm • Reading: 0.01 mm (typical design) • With ratchet • With locking lever • Wooden box \" Auction-ID: A7-46417-283

\" Inner measuring screw set (2-point contact) from GDR industrial production, manufacturer Suhl. Measuring range from 60 to 900 mm is covered by several extensions. The reading is done mechanically with 0.01 mm pitch. An original test certificate from HITEC Messtechnik is available. The test was carried out in accordance with DIN 863 Part 4, and the examinee was assessed as fit for use. The test certificate is historical and serves as proof of the previous calibration:Scope of delivery • Measuring head internal measuring screw • Extensions / intermediate pieces according to measuring range • Original wooden case • Original test certificate (HITEC measurement technology) Condition • Used, age- and use-related traces of use • Scales easy to read • Mechanics functional • Manufacturer: Suhl • Design: Internal measuring screw, 2-point contact • Measuring range: 60� ...

Manufacturer: VEB Pressenwerk Morgenröthe Type: PSHZ 40 Name: Screw press / balancing press (manual) Description: Manually operated screw press (balancing press) in solid cast construction from industrial production. The press works purely mechanically via spindle and hand lever, without hydraulics or electrical components. Suitable for pressing, straightening, assembly and joining operations in the workshop, maintenance and manufacturing. Robust and durable construction from GDR production. Scope of delivery: – Screw press as shown – Press table / support – Press type: Screw press / balancing press – Operation: manual – Size: 40 – Press force: Size 40 (according to experience, corresponds to approx. 40 t press force) – Maximum installation height: 460 mm – Total weight: 1650 kg Dimensions: – Width: 1800 mm – Depth: 1800 mm – Height: 2350 mm Weight: 1650 kg Auct ...

\" Lot of 11 micrometer measuring heads / fine adjustment spindles (used) Design: Mechanical micrometer measuring heads (fine adjustment spindles), cylindrical design, with scaling. • Reading up to 0.01 mm • Scale ranges including 0–10 / 0–30 / 0–40 mm (mixed) • With knurling and locking • Different designs and lengths \" Auction-ID: A7-46417-208

Wet spent grain conveyor - Housing with rectangular inlet chute - Wet spent grain bunker mounted at the inlet - Flushing water discharge connection - Mounted gear motor - Non-return flap with air connection, pressure gauge and ball access hatch., Additional title: Wet spent grain conveyor, Capacity approx.: 200 kg/min, Power: 4 kW, Current: 6,98 A, Voltage: 400 V, Frequency: 50 Hz, Material: Stainless steel 1.4301, Features: Spent grain bunker; non-return valve with compressed air connection, manometer and ball access hatch

Approx. 80 pcs. In stock on pallet, total dimensions approx. 1200x800x540 mm Auction-ID: A1-45790-563

Approx. 69 pcs. In stock on pallet, total dimensions approx. 1200x800x540 mm Auction-ID: A1-45790-564

Approx. 80 pcs. In stock on pallet, total dimensions approx. 1200x800x540 mm Auction-ID: A1-45790-562

Approx. 240 pcs. In stock on pallet, total dimensions approx. 1200x800x540 mm Auction-ID: A1-45790-565

Approx. 200 pcs. In stock on pallet, total dimensions approx. 1200x800x720 mm Auction-ID: A1-45790-561

Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5

nominal force:315 t stroke:300 mm no. of strokes:36 /min distance between columns:540 mm distance table/ram, max. stroke up, adjustment up:750 mm table surface area:530 x 630 mm blow die to die:630 t Allowed max. force:500 t ram surface:450 x 560 mm spindle diameter:180 mm power capacity:18,0 kW weight:13,0 t Dimensions (WxDxH):2,5 x 2,0 x 4,0 m

pressure:400 t stroke:280 mm no. of strokes:56 Hub/min distance table/ram, max. stroke up, adjustment up:680 mm table surface area:560 x 750 mm allowed max. force:600 t blow die to die:800 t spindle diameter:200 mm ram surface:560 x 560 mm height over floor:4,1 m power requirement:37,0 kW weight:12,0 t dimensions (WxDxH):2,2 x 2,0 x 4,25 m

with nuts. and screw feed The workpieces, max. 100 kg or 25dm³, are stored in the automatic filing machine and sorted in the correct position. At the end of the sorting process, the workpieces are buffered on a linear conveyor rail and sent for separation. Behind the separation is mounted a corresponding transport hose and a blowing air nozzle. Only one workpiece is transported through the transport hose at a time. The electrical interface can be HAN plugs, BUS modules and valve terminals. Workpieces : Press-fit bolt M6 x 15 Max. feeding capacity: 15 screws/minute (1-lane) Maximum filling weight: 100 kg Maximum filling volume: 25 dm³ Voltage: 230 V Max. power consumption: 100 VA

General SKU321S566 MakeWLS Gabler (D), Pressquick PQ 12 LocationBarneveld TypeE-60/10 D Main Features Motor3 KW Inlet diameter345 mm L/D3 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter60mm, Screw length 180mm L/D3 With jacketcheck AC-motor3.0 kW, 220/380 Volt With variable speed drivecheck Screw speed9-89 Rpm Inlet345x250mm Feeding with hopper- incl. mixer MaterialStainless steel Information No.12355 Year of constructionUnknown With switchgearcheck Floorspace1.8 x 0.7 M Total height1.35 M Weight560 Kg Extra Specifications: Without die plate Single screw extrudersFood additivesWLS GablerExtruders > Single screw extrudersIndustries > Food & Feed > Food additivesBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...