screw compressor atlas used for sale

Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.

A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.

Manufacturer: Atlas Copco Model: ZE 4 VSD (51 psi) with aftercooler Type of Machine : air compressor Temperature at max operating pressure: 40 °C Nominal pressure levels: 2.25 – 3.5 bar(e) Max. effective operating pressure: 2.25 – 3.5 bar(e) Min. effective operating pressure: 1.05 – 3.0 bar(e) Max. motor speed: 1200 U/min Electrical power consumption: 214.8 – 254.1 kW Air outlet temperature at max load: 40°C Required oil volume: 55 L Sound pressure level: 82 dB(A) Find more here - / Contact us at -

A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...

4000 werkuren! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible.

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

A mobile high-performance construction site compressor Atlas Copco for drilling applications is available. Design: tandem, volume flow: 28m³/min, max. operating pressure: 25bar, motor power: 368kW, engine: Scania DC13, fuel tank capacity: 600l, fuel consumption per hour at 75% and 100% load: 55l/77l. Machine dimensions X/Y/Z: approx. 6000mm/2100mm/2500mm, weight: approx. 7400kg, operating hours: approx. 650h. Including aftercooler, water separator, and PF filter. Documentation available. On-site inspection possible.

A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

Key data: 22 , 8 , 2

Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)

A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.

feed pressure: 11 bar Power: 11 KW Receiver: 500 L Control: AtlasCopco EL liter capacity: 1,38 m³/min dimensions of the machine ca.: - m weight of the machine ca.: 330 kg The Atlas Copco GX11FF EL (Full Feature, Extended/Electronic) is an oil-injected screw compressor with a rated power of 11 kW (15 hp), designed for continuous industrial use. The ‘Full Feature’ version features an integrated refrigeration dryer that provides dry compressed air straight from the factory. Delivery volume (FAD): approx. 1,446 l/min for the 10 bar version or approx. 60 CFM. Tank capacity: mounted on a 500 litre tank. Noise level: relatively quiet at approx. 67–69 dB(A) thanks to soundproofing hood. - Integrated dryer (FF): The refrigeration dryer prevents condensation from forming in the pipes and protects downstream tools. - Electronic control: The ‘EL’ models often feature a more advanced c ...

Atlas-Copco 1500 liter tank pressure vessel

Compressor: 13 bar Dryer Atlas-Copco FD220 14 bar Volume flow rate: 8.52 m3/min Power imput: 50 kW

Compressor Atlas Copco Type GA 11 C Technical data: - Data: see nameplate

screw compressor + dryer capacity: 702 l/min (at 10 bar) Maximum working pressure: 10 bar Power: 5.5 kW / 7.5 hp Pressure tank: 270 l Total operating hours: 10,670 Hours under load: 1,582

Three Atlas Copco compressed air compressors are available. 1) Oil lubricated screw compressor Atlas Copco GA18 VSD, year of manufacture: 2014, max. operating pressure: 13bar, power: 18kW, max. air flow: 216m³/h, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 550kg, operating hours: approx. 69000h. 2) Oil lubricated screw compressor Atlas Copco GA15, year of manufacture: 1998, max. operating pressure: 13bar, power: 15kW, max. air flow: 155m³/h, machine dimensions X/Y/Z: approx. 1900mm/700mm/1600mm, weight: approx. 400kg, operating hours: approx. 69000h. 3) Oil lubricated screw compressor Atlas Copco GA15 for spare parts. Documentation available. An on site inspection is possible.

Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

Atlas Copco air compressor with oil unit, type: GA22VSD+FF, serial number: AP1839586, year of construction: 2019, 400 V, 3 Ph, 50 Hz, 30 Hp, 22 kW, 12.75 bar, 4.5m³/min, 5700 r/min, working hours: 55952, dimensions: 1350 mm x 800 mm x 1600 mm. Oil unit dimensions: 1050 mm x 650 mm x 880 mm.

Atlas Copco air compressor, type: GA22VSD, number: AP1422569, year of construction: 2007, 12.8 bar, 6012 rpm, 3.84 m³/min, dimensions: 1700 mm x 650 mm x 1400 mm.

14-speed mounting screwdriver AC, for cylinder head mounting etc. Next: 3 spindle assembly screwdriver AC 3 and 6-spindle screwdriver ATLAS-COPCO 2 spindle screwdriver AC 3 spindle assembly screwdriver SPS & AC 1 spindle assembly screwdriver SPS

Electric screwdriver, servo screwdriver, with torque adjustment ATLAS COPCO QMR42-25-RT Tool holder: 3/8 R SERVO MOTOR: BSM 2260C-R4. 3 4230 1704 81 speed: max. 7000 rpm voltage: 22 V at 1000 rpm QRT38050 4230161380 New !' Dimensions: 590 x 120 x 45 mm

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

Compressor ATLAS COPCO Z 55 model oil free with dryer 8 bar 55 KW

Atlas Copco compressor type 1202 8784 82 ed 02, 1991, serial No. ARP11832-9

Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1988 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...

Blumer MCB III - label punching Technical Details · Max format : 700 x 1000 mm, · Min punched format : 10x10 mm, · Max punched format (non stackable)250 x 700 mm, · Max label format–stackable 150x 150mm, · Stack height : approx 50 / 80mm, · Punching pressure : 20tons, · Punching tool height:30 – 80mm. Additional Information · Delivery time IMMEDIATELY · Typ: MCB III · Year of man. 1978 · Condition: excelent · Located: Zagreb, Croatia Description · BLUMER MCB 3.1 PUNCHING MACHINE. The MCB 3.1 can punch any formats from paper, plastic, textiles, aluminium foil etc with fast program speed and high precision. Programming is via a freely programmable CNC, Storage capacity : approx 100 programs containing about 200 label positions each , numerically programmable. Machi ...

Absorption dryers

Refrigeration dryer

We offer used as it is where it is: SUNTEST XXL+ FD Atlas SUNTEST XXL+FD is an extra-large light stability test chamber : Information provided by the manufacturer on its webpage without guarantee: Light stability testing of Consumer Goods and Packaging The Atlas SUNTEST XXL+FD is an extra-large light stability test chamber especially tailored towards the needs of consumer goods, food and beverage testing. Its 3000 cm2 flatbed exposure area and tall chamber height is best-in-class for 3-D specimens testing and can accommodate all types of bottles and packaging. The SUNTEST XXL+FD is used to determine the light stability of new ingredients, products or packaging for food, beverages, or other FMCG (fast moving consumer goods) applications. It’s also extremely useful to perform highly accelerated shelf-life tests (ASLT) within days. A powerful chiller guar ...

Extraction plant

Masterwood Italy CNC Ventilation Center for Door and Window Production Type Woodmaster ATLAS Built in 2000 SN 00120018 for the processing of solid wood and panel material, etc. Working strokes of the axles: X Axis 3900mm Y Axis 1785mm Z- Axis 630mm Workspace X Axis 3500mm Y Axis 1210mm Z- Axis 210mm Max speed of axles 60-50-20m/min 6 edition consoles Workpiece clamping device Electric main spindle with ISO 30 intake 6.8 kW 24,000rpm Saw unit integrated in the work unit Automatic change of tools 18 positions Numerical control SINCRO with industrial PC and keyboard Safety tread mats Vaccum Pump Total required power 27 Kw Care pressure 6-7 atm Compressed air consumption per arebit cycle 200-300Nl/min Suction speed 25-30m/sec Air consumption 5000m3/h 400 V/ 50 Hz Weight 4500 Kg Technical information subject to reservation

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg