screw barrel used for sale

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mm turning diameter over slide rest: 130 mm turning length: 500 mm spindle turning speed - stepless: 40-3000 U/min weight of the machine ca.: 1 t dimensions of the machine ca.: 1.5x0.8x1.7 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm centre height: 170 mm centre distance: 650 mm turning dia. over face-slide: 196 mm spindle bore: 42 mm inner taper MT: 5 spindle turning speed - stepless: 20-3250 U/min weight of the machine ca.: 1,6 t dimensions of the machine ca.: 200 x 125 x 165 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

Conveyor system for powder products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 230 liter volume. Capacity 3 to 5 m?/h depending on product. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specification: capacity: up to 3 m?/h depending on product, suitable to dose up to 5kg/filling | discharge height: ca. 1.850m | standard angle: 45? | diameter of pipe: 114mm | power: 380V, 0.81kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 130kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50  ...

Screw Conveyor system for powder and very small granule products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 200 liter volume and vibrating motor to assure product flow. - Specifications: capacity: up to 5 m?/h depending on product, suitable to dose up to 10kg/filling | Discharge height: ca. 1.850mm | standard angle: 45? | diameter of pipe: 141mm | Power: 380V, 1.56kW | machine dimensions: size is depending on final customized system (hopper, conveyor length and angle can be customized - also optional: mixing device) | weight: ca. 170kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30- ...

with 4 capping heads Type: 97 Capacity: approx. 8,000 - 10,000 bph

Offer 25979 Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/sec - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Space requirement approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

: 0460 mm : 270 mm : 1500 mm : 230 mm : 76 mm : 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

Stock number: PM1063, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 0,5 kW - 220/380 Volt - 670 rpm., Theoretical capacity: 1000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1, Dimensions outlet: Ø 1, Manufacturer: Mono, Type: MD 30

Stock number: D1223, Material: Galvanized, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 100 x L 2980 mm, Motor: 1,1 kW - 220/380 Volt - 388 rpm., Dimensions inlet: Ø 150 mm, Dimensions outlet: Ø 150 mm

Stock number: PM1574, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 2,2 kW - 380/660 Volt - 1415 rpm., Theoretical capacity: 6000 l/h., Stage: 1 , Working pressure : Max 4,5 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½, Manufacturer: Mono, Type: MH40 D8

Stock number: D998, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: Yes, Dimensions: Ø 310 x L 1930 mm., Motor: 3 kW - 220/380 Volt - 61 rpm., Screw: Dosage screw, Diameter: Ø 60 mm

Stock number: D999, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: With inlet hopper, Dimensions: Ø 250 x L 2180 mm, Motor: 2,2 kW - 220/380 Volt

Stock number: D971, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 170 x L 1580 mm, Motor: 1,5 kW - 220/380 Volt - 71 rpm.

Stock number: D936, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Dewatering screw conveyor, Dimensions: Ø 400 x L 3800 mm, Dimensions inlet: L 630 x B 430 mm, Dewatering screen: L 2000 mm with 5x20 mm slots, Motor: 5,5 kW - 400/690 Volt - 65 rpm., Manufacturer: IRAS A/S, Type: TU

Stock number: D654, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 160 x 2050 mm, Motor: 2,2 kW - 380 Volt - 70 rpm., Other: Ø 250 mm outlet with bag squeezer

Stock number: D656, Litre: 100 , Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Diameter: Ø 60 mm., Motor: 1,1 kW - 380/420 Volt - 397 rpm., Manufacturer: BM Silo Ltd., Other: Product funnel with flexible screw

Stock number: D653, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 140 x L 1950 mm, Motor: 1,1 kW - 220/380 Volt - 18,8 rpm.

Stock number: D605, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 250 x L 1950 mm., Motor: 1,1 kW - 220/380 Volt - 6,2-43 rpm., Dimensions inlet: Ø 230 mm., Dimensions outlet: 940 x 250 mm.

Stock number: D609, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Dimensions: Ø 250 x L 3380 mm, Other: Trough-type

Stock number: D563, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 138 x L 1015 mm., Motor: 1,3 kW - 1700 rpm., Manufacturer: BENA, Year: 1996

Stock number: D513, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum screw conveyor, Dimensions: Ø 150 x L 2250 mm, Motor: 2,94 kW - 22,5-158 o/min., Manufacturer: Gerivac, Other: Prepared with zone for vacuum

Stock number: D429, ., Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 210 x L 1500 mm, Motor: 0,55 kW - 220/380 Volt - 52 o/min.

Stock number: D2025, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: Yes, Dimensions: Ø 320 x L 1720 mm, Motor: Estimated 1,5 kW - 380 Volt

Stock number: D1195, Material: Stainless steel AISI 304/steel 37, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: Yes, Dimensions: Ø 230 x L 2000 mm, Motor: 1,1 kW - 220/380 Volt - 28 rpm.

Stock number: D1181, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Standing: Obliquely placed on legs, U-profile: With lid and washing pipe, Motor: 0,55 kW - 220/380 Volt - 121 rpm., Manufacturer: Meyn

Stock number: D1154, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Dimensions: Ø 130 x L 3050 mm., Motor: 1,1 kW - 230/400 Volt - 60 rpm.

Stock number: D1122, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, O-profile: Yes, Dimensions: Ø 140 x L 1580 mm, Motor: 0,37 kW - 380 Volt

Stock number: D1118, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: With 3 pcs. of removable lids, Dimensions: Ø 125 x L 2500 mm., Motor: 0,75 kW - 220/380 Volt - 133 rpm.

Stock number: D1042, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, Standing: In leg rack, U-profile: With lid and inlet hopper, Dimensions: Ø 250 x L 1730 mm, Motor: 2,2 kW - 380/415 Volt - 64 rpm., Manufacturer: Schlösser GmbH Anlagentechnik

Stock number: D1117, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Screw conveyor, U-profile: Yes with lid, Double jacket: Yes, Insulated: Yes, Dimensions: Ø 300 x L 4170 mm, Motor: 1,5 kW - 230/400 Volt - 26,24 rpm., Other: Outer fully welded stainless cladding

Stock number: PM2076, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Inlet: Flange L 350 x W 180 mm., Motor: 1,5 kW - 220/380 Volt - 186 rpm., Theoretical capacity: 1000 l/h., Manufacturer: Seepex, Type: BT 2-12, Other: Screw feeding

WHEELED SCREW CONVEYOR to charge TANKER TRUCKS, for plastic granules, capacity ca.60 m3/h, Constructed in carbon steel with antirust painting, Outer Ø 300 mm, Bearing casing with dust seals, loading hopper 1.000 x 1.000 mm., 7,5 kw gearmotor, wheeled supporting structure, Total screw length 7,0 mt., Discharging height 4,5 mt., flexible pipe with capacity sensor on discharge, complete with control panel, CE compliance, Users manual, Electrical drawings., ALSO AVAILABLE IN STAINLESS STEEL VERSION, See other similar items with different features [GE751](.germanplast/listings/7506589-wheeled-tanker-loading-screw-con veyor-basic)[-GE753](.germanplast/listings/7553224-wheeled-tanker-load er-adj-height-with-automatic-retractable-sleeve)[-GE750](.germanplast/ listings/6874982-tanker-loading-system-60-m3-h-automatic-retractable-s leeve), installed power - used power in work: about 60-65% : 7,5,  ...

PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor (or bespoke), Screw length 8.300 mm, The bearings are dust-tight and automatically greased., ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an  ...

QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...

Key data: 35 mm, 25 , 103 U/min

Used extruder 35mm - 25 l/d with 5.6 kW drive 3-zone auger 3 heating/cooling zones on the cylinder + 1 tool zone Mass pressure sensor 500 bar All machine cables designed to be plugged in Control cabinet with main switch, motor controller, mass pressure indicator and 4 pieces of temperature controller Function-tested

Key data: 63 mm, 1300

Twin screw extruder, conical Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Serial No.: 32061 Working hours: 32,303 h Screw geometry: conical for PVC-hard profiles Screw diameter: 63 – 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque of the gearbox: 1000 daNm Dynamic load rating of the return pressure bearing: 103600 daN Engine power: 43.0 kW, Drive motor: Baumüller DC motor Cylinder heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool Heating Zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible mass pressure: 500 bar Output capacity: approx. 150 - 200 kg/h for PVC-rigid profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 k ...

Stock# U2457-3 Used stainless steel horizontal screw conveyer by Van Beek BV (NL) type "U", model TR300. Width of the gutter 315 mm. Screw has diameter 300 mm, lead of the screw 270 mm, total length of the screw 290 cm. Conveyer has two inlets, each with diameter 298 mm and rotary magnetic separator by Goudsmit Magnetic Systems (NL). Each separator is driven by el motor and reducer 0.18 kW, 1320/21 rpm, 220-240/380-415 V, 50 Hz. Spacing between center axis of each inlet is 145 cm. Conveyer has also two rectangular discharge outlets, each with dimensions: 240 mm x 250 mm. Spacing between centers of discharge outlets - 250 cm. Screw is driven via reducer and el motor 2.2 kW, 220-240/380-415 V, 50 Hz. Working rotation of screw up to 64 rpm. Last time machine had been working in food industry as a collector of powdered products from two vibrating screens.

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

turning diameter over bed: 800 mm turning diameter over slide rest: 860 mm turning length: 6000 mm turning diameter: 800 mm swing diameter over bed slide: 800 mm swing diameter over cross slide guide: 520 mm spindle bore: 71 mm speeds: 11,2 - 1800 U/min volt: 400 V chuck: 315 mm chuck: 630 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mm turning diameter over slide rest: 260 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 40 - 2000 U/min centre height: 205 mm spindle bore: 50 mm total power requirement: 4,5 KW weight of the machine ca.: 1,6 t dimensions of the machine ca.: 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw Compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6Fabr. No. 6240330200 built in 2003Volume flow rate 4.6 m3/min. Pressure capacity 10 barMotor power main motor 30 kWNe-connection 400 Volt, 50 HzConnection thread 1 1/2 inch- 36004 Switch-on hours read- 19256 load hours read- SoundproofedSpace requirement L x W x H 1850 x 1050 x 1760 mmWeight 910 kggood condition; used