134,704 used machines on RESALE, but how to find them? Machine Search
Offer 26166 - Screw compressor Make: KAESER Type: SK 22 Engine number: 1464 Year of manufacture: 2015 - Control SIGMA Kontrol - Operating hours approx. 15933 h - Load hours approx. 7654 h - Operating pressure 11 bar - Delivery rate 1.67 m³/min - Drive 400 V / 11 kW - Space requirement approx. W 780 x H 1030 x D 850 mm - Weight approx. 300 kg - Compressed air boiler Make: OKS Type: 500L Engine No: 462811 Year of manufacture: 1998 - Boiler capacity 500 L - Compressed air dryer Make: JÄGER Type: ERD 150 Engine No: 1268 Year of Make: 2011 - Refrigerant R134 A - Cooling air volume 150 m³/h - Oil - water separator
Key data: 40 mm, 40 , 600 U/min
Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading
Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes -Screw stand: 1 piece -Minimum height: 140 mm -Max. height: 225 mm -Dimensions: Ø 80 x 140 mm -Weight: 4.4 kg
For sale is a new and unused Busch COBRA Industry NX 0450 A LH1 screw vacuum pump. The pump was delivered in December 2025 and has never been used. The dry-running screw vacuum pump is ideal for industrial applications such as foundries, plastics processing, packaging technology, vacuum systems and many other production processes. Technical data Manufacturer: Busch Type: COBRA Industry NX 0450 A LH1 Year of manufacture/delivery: December 2025 Condition: New, unused Pumping speed: 350 m³/h (50 Hz) Final pressure: 0.5 mbar Motor power: 7.5 kW Voltage: 400/690 V, 50 Hz Speed: 2,900 rpm Degree of protection: IP55 Water cooling Sealing Material: FKM The pump is supplied with a nameplate and documentation. Invoice from December 2025 available. Viewing possible by arrangement.
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
consisting of 7 pieces incl. battery and 6 charging stations Auction-ID: A7-49089-540
An oil-lubricated, variable-speed Almig screw compressor is offered. Motor power: 22kW, volume flow: 760-3910l/min, max. operating pressure: 13bar, max. motor speed: 6400rpm, operating hours: approx. 24702. Documentation available. Inspection possible by arrangement.
Offered are two identical, belt-driven, sound-insulated Alup screw compressors. Power: 7.5kW, operating pressure: 10bar, capacity: 1m³/min, weight: approx. 215kg. An on-site inspection is possible.
Key data: 17 mm, 40 , 1200 U/min
Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //
Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Mahle, screw compressor type MSK G11 -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar -Individual components: see photos -Dimensions: 730/690/H1315 mm -Weight: 291 kg
According to photos, weight approx. 50 kg. Auction-ID: A1-48554-119
turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Here we offer a strong Schneider screw compressor for sale. A 14 kW variable speed screw with refrigerant dryer and large 500ltr. Kettle. Operating hours approx. 14789, load hours 14348.
Key data: 50 mm, 30
Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
According to photos, weight approx. 50 kg. Auction-ID: A1-48554-121
According to photos, weight approx. 50 kg. Auction-ID: A1-48554-131
According to photos, weight approx. 50 kg. Auction-ID: A1-48554-130
Key data: 35 mm, 25 , 107 U/min
used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
According to photos, weight estimated Auction-ID: A1-48554-202
According to photos, weight estimated Auction-ID: A1-48554-171
Key data: 650 mm, 1300 mm, 1 U/min
Circulation diameter over bed 1300 mm, over support 1000 mm Center width 6000 mm Bore 130 mm Speed 1.6 - 630 1/min, infinitely variable in 3 ranges Longitudinal feeds 0.09 - 5 mm/rev Thread metr. 0.56 - 128 mm Thread inches 64 - 0.28 g/" Tailstock quill travel 250 mm Total connected load approx. 52 kW Rapid traverse Rotating bezel 2 fixed bezels closed 1 fixed bezel open Coolant tank with pump
greates pass round over bed: 480 mm swing diameter over bed slide: 300 mm turning length: 1500 mm centre height: 240 mm centre distance: 1500 mm spindle bore: 42 mm spindle turning speed range: 14 - 1400 U/min total power requirement: kW weight of the machine ca.: 2,4 t dimensions of machine L x W x H: 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SPECIFICATIONS: Air flow rate L/min: 6000 Operating pressure bar: 8 (variable max 13) Installed power KW: 30.0 Complete with inverter Operating hours: approx. 8000
1 of used capper for sports-caps, make Officine Ave, type TAR 8T Pick&Place, new 1997, operates from left to right. Used for 500 ml PET bottles.
Pressure: 13 bar Motor: 7,5 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,87 m³/min Measurement (WxHxD): 1835 x 1645 x 955 Weight: 425 kg Compressed air connection: 1/2
Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg
Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,03 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 260 kg Compressed air connection: 1
Pressure: 7,5 bar Motor: 55 kW Voltage: 400 Volt / 50 Hz Free air delivery: 9,81 m³/min Measurement (WxHxD): 2100 x 1720 x 1200 Weight: 2030 kg Compressed air connection: DN 65
Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,815 m³/min Measurement (WxHxD): 1890 x 1520 x 854 Weight: 437 kg Compressed air connection: 1/2
Industrial Screwdriver Fein AS sd 715-1 Data Industrial Screwdriver - Stick Wrench ASsd 715-1 Fein Elektronik ASsd 715-1 With transformer 42 volts / 40 watts, 1.0 A, 1000 rpm, Right/Counterclockwise Rotation (only screws on pressure)
turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure: 13 bar Motor: 22 kW Free air delivery: 2,74 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 635 kg Compressed air connection: 1
Pressure: 7,5 bar Motor: 18,5 kW Free air delivery: 3,12 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1
Pressure: 13 bar Motor: 18,5 kW Free air delivery: 2,32 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 550 kg Compressed air connection: 1
Pressure: 13 bar Motor: 75 kW Free air delivery: 10,4 m³/min Measurement (WxHxD): 2780 x 1990 x 1490 Weight: 2410 kg Compressed air connection: 2 1/2
Wabeco screwdriver with industrial screwdriver Fein AS sd 715-1 Industrial screwdriver: Fein AS sd 715-1 1000 rpm 42 V / 40 W / 1A Foot control by Hans Bernstein The hand lever is used to guide the industrial screwdriver upwards against the spring, hold the screw in position, release the lever and start the rotary movement with the foot switch. Due to the spring pressure and the dead weight, the screwdriving process is carried out without manual effort.
Pressure: 10 bar Motor: 55 kW Free air delivery: 8,5 m³/min Measurement (WxHxD): 2040 x 1450 x 1090 Weight: 1498 kg Compressed air connection: 1 1/2
Pressure: 8 bar Motor: 22 kW Free air delivery: 3,62 m³/min Measurement (WxHxD): 1072 x 1740 x 1060 Weight: 646 kg Compressed air connection: 1
Pressure: 8 bar Motor: 37 kW Free air delivery: 7,05 m³/min Measurement (WxHxD): 2040 x 1450 x 1090 Weight: 1250 kg Compressed air connection: 1 1/2
Pressure: 7,5 bar Motor: 18,5 kW Free air delivery: 3 m³/min Measurement (WxHxD): 1250 x 1335 x 850 Weight: 400 kg Compressed air connection: 1
Center height: 300 mm Center width: 2000 mm Circumferential Ø: over bed 620 mm Spindle bore: 83 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 14 - 1000 rpm Feeds: longitudinal/flat 0.086-4.842/0.04-2.258 mm/rev Thread pitches: 0.5 - 28 mm Electrical connection: 380/400 V, 15 kW Space requirement: 3600 x 1200 x 1350 mm Weight: 3400 kg
Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,03 m³/min Measurement (WxHxD): 1171 x 595 x 599 Weight: 260 kg Compressed air connection: 3/4
maximum number of results exceeded
please refine your search
220 € 
