screen printer used for sale

Holweg RS 21 Bag making machine, for Flat- and satchel bags, with in-line printer and window unit. Holweg Rotosimplex 21, Year of production : 1981 with 4 colors inline printer W&H QMS 992, 4 anilox, 4 rubber cylinders. Bag width 70 – 380 mm Gusset depth 12 – 80 mm Bag length 145 – 660 mm Cut length from 160 to 680 mm Max paper width 900 mm, Max print width 860 mm Bottom from 13,3 to 18,3 mm ( on this machine also possible for bigger bottom fold ) Max. speed 800 bags/min. Paper 30 – 125 g/m2 Foil window unwinder. Printing format cylinders 41 pcs. (270-1, 290-4, 300-1, 320-3, 350-3, 360-2, 370-1, 400-4, 420-4, 440-3, 470-4, 520-1, 600-4, 640-4, 680-2) Forming plates 28 pcs. (80,85,90,100,105,110,115,120,130,140,150,155,160,170,175,180,185,190, 200,210,220,225,230,240,250,270,300,320) Equipment for 5 sizes of wicket bags: (cut lengths 400,350,450,470, 520)  ...

With 8 compartments and 24 screen frames

1 x Farrel Banbury internal Mixer, Model 00C.  Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. In very good condition. Machine to be supplied checked over (overhauled) and fitted with new electrical controls including Siemens S7-1200 PLC and touch screen PC for auto/manual mixing and recipe/data saving.

Minidose packing machine Made in Spain for small dose of sauces, olive oil, powder, hot caramel. The machine is new one and can be prepared for any kind of liquid, powder, granulate. PLC and screen. Electric photocell. coding machine. Further information please contact

We offer the following for sale here: Item number: 14454 ICML AD-4328 scale with roller conveyor and platform ICML AD-4328 scale with roller conveyor incl. platform (HxWxT) 26x170x67cm 3 x roller conveyor 50x50x80cm (HxBxT) each with its own electric drive. Photocells for positioning lb/kg Switching Acccumulative data is stored in memory automatically or manually Comparator output to optional relays (Hi/OK/Lo) Setpoint comparison for batching applications Powered by AC adaptor or external DC (6 to 12V) power supply Standard serial output for printers, external displays, etc. Front panel protected to IP-65 Powers up to 6 load cells at 350 ohms CompensationGravity Function Optional bi-directional RS-232C, RS-422, RS-485 interfaces and BCD Averaging time and width can be choiceed for various applications Digitallly span calibrated by entering a sensor output voltage through the keypad 1/1 ...

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition Nagema wafer cutter 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

We can offer: Windmoeller & Hoelscher Type : Triumph 1 Year: 1980 Bag width 50 - 120 mm. Tube length 120 - 340 mm. Bottom width 35 - 70 mm. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels We also have available a suitable 2 and 4 colour tail end printer

Plant for the production of filament for use in 3D printers Capacity up to 10 kg/h consisting of 30 mm extruder, stainless steel trough, puller and winder with traverse guide

Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request

CNC flatbed portal cutting machine with web control CNC 3000. plasma system Fabr. KJELLBERG HiFocus 160i and filter system Fabr. KEMPER. Working range: 2000mm x 4000mm portal bridge with double-sided, synchronised rack/pinion drive in longitudinal axis / play-free timing belt drive in transverse axis / guide track with cover and high-precision linear guide system on torsion stiffener aluminium profile / trolley with precision profile rollers / 3 pieces digital AC drive motors / switch gear control for the switch gear CNC control under Windows with 32bit processor, color screen 12.1 LCD TFT, interfaces V24 + USB, SATRONIK PLUS CAD/CAM programming software with all geometry functions (e.g. point, arc, circle, rectangle, long hole, etc.), functions (e.g. moving adjustment, stretching, chamfering, etc.), manipulations (e.g. turning, mirroring, etc.), SATOMATIC HV 150 PT arc height scan  ...

Year of manufacture 09/1992, with new measuring meter type MZ 2000 and screen. Recoil plate 2000 x 4000 mm X trail approximately 3300 mm Y way approx. 1200 mm Z-way approx. 1200 mm Total weight approx. 3.5 t reinforced column 160 mm square

Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch screen new Paper machine Magnetic Chuck 600 x 350 Automatic table dressing with compensation 1 flange Items put up Installation / commissioning / transport

Work area: 1.5 x 3 m or 2 x 4 m Standard equipment: self-focusing cutter 2 kW laser cooling unit, astringent and purifying air system, security, automatic twin transfer table, CAD/CAM software (Metalix, Lantek, Almacam) control unit with 15 "-touch screen, conveyor belt, warning light, nozzle set All CAD/CAM programs such as Lantek, Metalix and Almacam are usable. Options: Linear drive technology, laser light source optionally available with 3, 4 or 6 KW Sampling device, safety light barrier, air conditioning for automation Panel. 24 months warranty The price refers to a 1.5 x 3 m facility with 2 KW

Model SLP-15/O - available immediately! Memorized width 1200 x 1800 height x 1600 deep Dimensions 1720 width x 2610 height x 1900 depth Electric power supply Rated power 15 kW Voltage 380V Frequency 50-60 Hz Control: 7 "touch screen Door type: 2 doors on one side Anti-ex Castle Warm-up time 15-30 min. (180 ° C) Uniformity & lt; ± 3 ° C, if 180 ° C Max & lt; ± 3 ° C Temperature of 230 ° C Max Transport: Horde carriage Air circulation fan Heaters removable roof heating panels Vertical circulation Fan mounted radially on removable panels Motor 1,1 kW 3456 L capacity Warranty 12 months GERMAN-SPEAKING CONTACT IN GERMANY JUST ASK THEM Shipping time: Immediately Shipping costs will be calculated individually. Also plants according to your wishes. More information under Romer Germany Electrostàtica pintura, pintura en pole, powder coating ...

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Rotary feeder, modern bottom opening station, CCS control system, 2 valve units, bottom patch with 2 colour tail end printers

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

Surgical image intensifier (C - arm) Ziehm Exposcop 8000 with dual monitor. Digital multiple image memory, Sony video printer in good condition

Sato LS 2000 Working Range: 2000mm x 6500mm CNC 3010 Topaz Touch Screen 1 x Plasma Ultra Cut 200 ( Cutting up to 35mm ) Donaldson Suction System. To visit . Installation and commissioning on request; ready for immediate use

The NEXUS of 7501 is the cheapest universal hardness testing machine with currently available technology: This hardness testing machine sets the benchmark in quality and price in the device class with proven swivel mechanism (motor switch between Indenter and lens): never get a comparably-equipped machine of this quality at such a fair price. In the standard version are already integrated: USB camera + software for the automatic measurement of impression of hardness -electronically controlled test load application with load cell in closed-loop -integrated boxed PC (WIN 7), LAN connectivity, result export, hardness testing software IMPRESSIONS -integrated touch-screen monitor for a simple, direct touch control -LED lighting, Brinell with ring light The machine is universally suitable for all classic metal hardness testing (test loads 0.5 250 kg). Due to the modern, quality equip ...

NEMESIS 9000 are high-quality, modern, by INNOVATEST developed and produced hardness tester. These versatile machines combine groundbreaking technologies and extensive facilities in a machine body with a modern design. The basic function of the hardness concept is based on a settled on the test piece nose cone's mounted a turret with up to 8 positions. The desired hardness test method can be choiceed conveniently on the large touch screen monitor by means of Visual, intuitive user interface (control and evaluation software IMPRESSIONS. Now, the operator presses START and starts the automated testing: -automatically the turret swivels the correct Indentor / lens -using search drive, the specimen surface is contacted and focused (Vickers / Brinell) -now the impression generated power-regulated -then the integrated image analysis software automatically evaluates the impression of h ...

Herbert Gemini weigh price labeller from 2003. Weighing range: - Max weight: 4 kg - Min weight: 0,1 kg Weight precision: 0,002 kg Labelheight: - Applicator no 1: 150mm - Applicator no 2: 400mm Packs per minute range: - Minimum speed: 1 per minute - Maximum speed: 100 per minute Conveyor width: 225mm Year of production: 2003 Serial number: 20251005 Condition: good Dimensions: - Checkweigher: 1.600mm x 750mm & 1.750mm (LxW&H) - Labeller & printer: 1.800mm x 1.000mm & 2.100mm (LxW&H)

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

Technical data:- Funnel opening 1030 x 1235 mm- Funnel volume 1.5 m3- Power depending on material and screen size- Motor 30 KW- rotor diameter 360 mm- rotor length 1030 mm- Rotor speed 70 - 90 rpm 50 checker knife 30 x 30 mm - PLC control cabinet (completely wired) incl. 5 m cable-siebloung 8 - 40 mm after optional suction nozzle diameter 200 mm- slider with pressure beam- vibration-absorbing machine feet- Automatic star triangle start-up- automatic Off when idle- clock control to avoid unnecessary idle time- CE-Conform dimensions LxWxH 2455 x 1970 x 1730 mm- Weight 2600 kg

- Brikettdurchmesser 80 mm - Hydraulik Motor 11,0 Kw - Stundenleistung 90/210 kg/h - Luft-Öl-Kühlsystem - 7 Zyklen/min. - Brikettlänge max. 50 mm - Doppeltes Manometer - Ölstandssensor im Behälter und Temperatursensor - Schaltschrank mit SIEMENS SPS-Steuerung Touch screen - Betriebsstundenzähler - Schneckenkanal, Schneckenaustragung - Materialtrichter 1900 mm x 1600 mm - Ölkühler HYPERCHILL - Spannung 400 V/50 Hz - Abmessungen L=2000, B=1600, H=1230 mm - Gewicht 1550 kg

Complete extrusion line with foster, dispense, extrude, granulate and bagging for sale. Clsihnhs Extruder: Abdullah AE 1-75-36-7 single screw extruder, 200-300 kg / h throughput (PA6, ABS, ASA, PP, PBT, POM, etc.), 126 kW motor, new price 150,000 € Dosage: Protec polymer (formerly man and Hummel), main level with core Auger and volumetric dosing, 2 main scales, 2 additive scales (defect) Granulation: Pelltec SP 100 easy, 3 kW Also here: Complete solid steel frame for feeders, water bath, wiper frame, classifying screen, bagging tower with all metal separator, conveying blower.

capacity 500 kg/h power 3 kW electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 200 mm width 640 mm height 1 250 mm insertion resp. discharge height 1 250 mm weight 115 kg material 1.4301 / AISI 304 mash pump connection DN 65 AG stone discharge height 380 mm mash discharge height 340 mm suitable for stone fruit, berries scope of delivery 5 mm screen ; new machine - top condition

capacity 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ \" inside connection for washing bath 2 \" outside mash discharge height 1 480 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen ; new machine - top condition

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

different types: - Straw Shredder KSTAS 7,5kW - Straw Shredder KSTAS 9kW - Straw Shredder KSTAS 11kW electric outlet 400V 50Hz (3 phases) fuse 32 A capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

- with power take-off drive 540 rpm without universal shaft capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

5-deck vibrating screening machine, screen area 1.4 m x 0.5 m each, incl. 2 pieces of unbalance drives (type: MO-90/4, 0.8 kW / 1.460 UPM each), clamping bushings, chain crates for screen cleaning, 5 pieces of screen coverings (various sizes available to choose from) and base with spring bearings. Dust-tight design, inlet oval, currently 2 outlet nozzle SN 150 (expandable). Very few operating hours, completely overhauled in 2017.

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

- Brikettdurchmesser 60 mm - Hydraulik Motor 5,5 Kw - Stundenleistung 15/70 kg/h - Zylindrischer Materialbehälter FI 1000 mm - 7 Zyklen/min. - Brikettlänge max. 60 mm - Druckmanometer - Ölstandssensor im Behälter und Temperatursensor - Schaltschrank mit SIEMENS SPS-Steuerung Touch screen - Betriebsstundenzähler - Spannung 400 V / 50 Hz - Niveausensor für automatisches Abschalten - verchromte Zange - Abmessungen L=1700, B=1170, H=1510 mm - Gewicht 650 kg

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

BITZER / ALFA LAVAL L7SW1S12PP Product number:M19-4335 Cooling capacity:930 kW Refrigerant:NH3/R717 Refrigerant Content:80 kg Voltage:400 Volt Motor power:250 kW Dimensions:9.000x3.000x2.600 mm Weight:13.500 kg Year:2014 Number in stock:2 piece(s) Price:Quotation request Very nice and young Bitzer water-cooled ammonia water chiller(s) built in a machine-room container with mechanical cooling. This Bitzer chiller consists of a frequency controlled Bitzer screw compressor (brand Danfoss), WEG electric motor 250 kW, horizontal oil separator, oil cooler, combined economiser/liquid separator, Alfa Laval plate heat exchanger evaporator, Alfa Laval plate heat exchanger condenser, Grundfos speed controlled pumps and a control cabinet with Siemens PLC and touch screen. The above mentioned capacity is at +18/12°C in/out and a flow rate of 143,7 m3/h. and a cooling water supply +4 ...

Drum cleaner type EIRICH with double screen 1.5 m width

Siemens screen module incl. 3 replacement slacks

Screen: 1200x860mm Without electric motor; ready for use

Autom. Stop cylinder screen printing machine maximum size 1050 x 750 mm min. size 560 x 350 mm Speed 800 4,000 PCs / h Max. Pressure area 1050 x 740 mm Printing frame 1300 x 1170 mm Paper thickness 90-420 gram Weight 4750 x 3060 x 1720 mm

Micro button Manufacturer: Dage Type: Microtronic 22 The universal device for the connection techniques usually used in microelectronics. In many gradations, to changing measuring arms for the pulling test are easily (up to max. 10 kg). Switch can be selected between destructive and non-destructive testing. For the non-destructive test, the maximum assembling force thumb wheel switch can be limiting. The haul-off speed is infinitely adjustable up to 10 mm / s. The readings are analyzed and document formats through the external printer. The measured values are displayed in grams. Technical data Measurement types: Pul-tests/shear test Test modes: destroying / Nichtzerstörend Additional functions: "Overheight-test" (finding great Loophöhen), "keyword test"(Festigkeitprüfung von "Stich-Bonds") Test memory capacity: up to 9999 tests  ...

FUJI PROOFGERAET PICTROSTAT 400 D Built in 2001 Manual is available. Inks and papers are also available The former Nettoneupreis DM 63.900,00 General Fujifilm Pictrostat 400 d With the 400 d Fujifilm Pictrostat, Fujifilm presents its digital full color copier for prints up to format DIN A3. By combining the functions of the High-performance digital printer Pictrography and the copying of his little brother Pictrostat 300 Pictrostat 400 d was launched very successfully in the German market. As also the Pictrography, Pictrostat 400 d with the Thermoentwicklungs-works and -transfer process, which completely without chemicals comes out and basically like a Image separation works. Only water, light, heat, pressure, become the processing Need photo paper and the donor paper developed by Fujifilm. This eco-friendly Method to produce prints in photo quality has ...

- Brikettdurchmesser 70 mm - Hydraulik Motor 7,5 Kw - Stundenleistung 50/120 kg/h - Luft-Öl-Kühlsystem - 7 Zyklen/min. - Brikettlänge max. 50 mm - Doppeltes Manometer - Ölstandssensor im Behälter und Temperatursensor - Schaltschrank mit SIEMENS SPS-Steuerung Touch screen - Betriebsstundenzähler - Schneckenkanal, Schneckenaustragung - Materialtrichter 1900 mm x 1600 mm - Spannung 400 V/50 Hz - Abmessungen L=1850, B=1500, H=1230 mm - Gewicht 870 kg

Automatic Horizontal Cartoner Marchesini MA 352. Continuous motion horizontal cartoner, suitable for high speed packing in cartons of small bottles , vials , drops . Entirely built with a balcony structure, this machine?has all features and advantages of Marchesini cartoners: carton magazine in an optimum position, maximum accessibility, extremely fast change-over times,?minimal maintenance. Possibility of collecting the various rejects (product, carton, leaflet) in different containers, allowing improved recognition and control of the rejected items and easier, safer handling of rejects. General features: Balcony construction fully compliant with GMP standards ?All feeding units located in ergonomic positions. ?Mechanical parts in an oil bath to reduce maintenance and limit noise ?Reliable and fast ?Simple, fast size change-over, can be performed entirely from the machine front ?Touch S ...

Vibro screening machine Allgaier type D 950/I Upgrade to Type 950/II Two Vibromotors 0.5 kw Second screen deck, screen elevation 100 mm stainless steel New wire sieve

Vecoplan injection moulding machine Type: VAZ 160/200 SLF Control: PLC Control built year: 2004 Dimensions and weights Dimensions LxBxH m: 3.5 x 3.75 x 2.34 Machine Weight kg: 19,000 Other Inlet length: 1600 mm inlet width: 2000 mm rotor diameter: 640 mm Double number cutting crowns 48 pieces (80 x 80 mm) rotor speed: 148 UpM screen diameter: 120 mm drive power: 250 kW operating voltage: 400 V frequency: 50 Hz throughput: When face, Precrushed and FE-free material for replacement fuel preparation > 12 t/h at heavy goods with a density of 120 kg/m ³ > 5 t/h at lightweight with a density of 80 kg/m ³ with product grain size < 150 mm more than 98% < 30 mm less than 5%.

GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...