screen ctp used for sale

Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw

Size: 1.000 x 3.780 mm - Included frame - Will be overhauled, sandblasted and painted

For sale is a used plate screen changer from the manufacturer BD Plast SRL. The screen changer is in a used but well maintained condition. Specifications: - Screen diameter: 250mm - Filter area: 491 cm² - Sealing ring PTFE/ Teflon - Heating capacity approx. 22kW - Number of control zones: 4 - Operating pressure max. 400 to 500 bar - Hydraulic unit designed for quick change - Throughput capability from 800 to 2,000 kg/h - Weight approx. 950 kg incl. documentation, documents, drawings, etc... Screen change can be visited by prior appointment.

Drum screening machine with conveyor technology Drum 7000 x 2500 mm, screening fine fraction and 100 x 100 mm fraction Discharge of fine fraction by means of screw conveyors Discharge of oversize particles by means of belt conveyor

Slicer IFE 2 x 5 m 1 Deck Version Screen lining, wire cross-tensioned Very good condition, few operating hours from a pilot plant

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

WJATECH WJA D096P A MA screen printing conveyor dryer built in Poland in 2020 is dedicated to the advertising industry, where efficient drying of prints on fabrics or textiles is required. Fast achievement of the right temperature and a conveyor belt with a large working space make the WJATECH screen printing dryer the best solution in this field. Technical specifications of the WJATECH WJA D096P A MA screen printing conveyor dryer - HMI panel: WEINTEK - main switch - power: 64 kW - working pressure: 6 bar - power supply: 3×400 VAC; 50 Hz - dimensions (L x W x H): 4500 x 2200 x 1700 mm - weight of machine: 900 kg

Complete project for the construction of a mobile drum screening plant Complete production documents for a newly developed car-mobile drum screening plant -Complete set of drawings -Bom -Electrics must be adjusted during initial assembly -2.5 to car mobile drum screen -Capacity: from 25 cbm/h -Propulsion: Diesel generator, generator or direct external feed-in for electricity -no prototype produced yet Price is net plus VAT. Trade-in possible Further data is available on request.

ID3270 Keestrack Combo year/Baujahr 2014 approx. 240 hours (real!) /hours (real!) 17.5 t Mobile crawler screening system, 6 cbm hopper, 2-deck screening (2700 x 1200 mm)(screen box KT2712E), rubber feed belt, Deutz engine DT2011L04i (53 KW), radio remote control Track-mounted screening plant, 6 cbm hopper, 2-deck screening (2700 x 1200 mm)(screen box KT2712E), rubber feed belt, Deutz engine DT2011L04i (53 KW), radio remote control

Komptech Multistar L3 # 75144 Facilities Multistar L3 Trailer Multistar L3 EU Declaration of Conformity Connect Control cabinet 50Hz Diesel generator 80 kW T4f/Stage V Cleanfix - Fan Fine Screen Deck 10/25 S1 Coarse screen deck 60/90 Bunker Hydr.Foldable Dosing roller Hammer Standard Fine grain collection belt Medium grain discharge belt Air Classifier Medium Grain Preparation of the GK air classifier Trailer (3-axle) Switching from 3 to 2 fractions Slip-on shoe Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

Komptech Multistar L3 Category: Star Screen Specification: Serial / reference number: 75070 Designation: Multistar L3 Performance: Weight: kg Emission class: Tier 4 Final / Stage V Equipment and description: Screen with 3 fractions – fine fraction (mm): 0/10... 25 Middle fraction (mm): 10... 25/60… 90; Coarse fraction (mm): > 90... 120 75 kW/A Diesel Generator Bunker volume: 7 m3 Feed height (mm): 3,450 / Feed length (mm): 3,750 Max. discharge height medium and fine fraction (mm): 3,500 / Max. discharge height coarse fraction (mm): 2,850 Weight approx. 21 tons / Transport length (mm): 11,500 / Transport width (mm): 2,250 / Transport height (mm): 4,000 Throughput depending on the type of material up to approx. 200 m3/h Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no ...

STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION

Komptech Multistar One Star screen with electric drive #6929 Facilities Multistar ONE EU Declaration of Conformity Feed hopper Anthology Machine documentation 5 inch touch panel Electric Hydraulic Pump HyDrive 2.0 MS ONE Doppstadt Siebdeck 60/90 Drive motors (2 pcs.) Fine grain discharge belt Oversize discharge belt Hook Lift axle Shunting drawbar Condition: Servicemaintained Availability: by arrangement Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects. We reserve the right to sell in advance, make changes and repairs.

ID3385 Vibrating channel Vibron channel Vibrating channel Vibron channel

- Volume: 1400 liters. - Bucket width: 177cm. Auction-ID: A1-48031-42

New drum! Perforation 25 x 25mm QV. 8mm sheet thickness Auction-ID: A7-48388-7

Reference ID PP-59633 Category Screen Printer Manufacturer - Model S-LINE Year Built 2022 Color - Impression - Working Hours - Speed - - Max. Size - Min. Size - Condition Good Location Europe Availability Immediately Machine Description Screen Printing Carousel for Textile Printing VERSATRONIC S-lim Number of stations / pallets: 8 Number of print heads: 6 Maximum printing area: 400 x 450 mm Pallet drive: frequency-controlled AC servo gear drive Squeegee Drive System High-precision AC servo drive 4-piston POWER squeegee system Main Control Rotary arm with control panel and 7" SMART touchscreen Microprocessor with diagnostic program Printing Programs 6 standard programs High opacity MULTIFLASH program Cooling stop Test print Start / stop Screen cleaning mode Pallet stop between print heads Free running mode Accessories 8 aluminium sandwich pallets 420 x ...

Auction-ID: A1-47745-90

Auction-ID: A1-45071-2196

Screening Machine Fully functional Number of sieves: 3 Viewing by arrangement Location: 99099 Erurt am Haarberg District of Rohda

Auction-ID: A1-45071-2195

Auction-ID: A1-45071-2197

Auction-ID: A1-48235-72

Continuous melt filter The Berlyn Corporation, today: Berlyn ECM S/N 109F160

Builder: TERRA SELECT Model: T5 Motor: PERKINS 55 kW (75 HP) Transp. Data: L. 11.150 mm x L. 2.550 mm x A. 4.050 mm Operat. Data: L. 14.100 mm x L. 6.800 mm x A. 3.900 mm Year: 2005 Working Hours: 3.200 h Hourly Production: 120 m³/h Screening: TROMMEL L. 4.500 mm x D. 2.000 mm Hopper Height: 2.820 mm Hopper Capacity: 4.40 m³ Discharge Belts: L. 4.900 mm x L. 900 mm Fuel Tank: 300 L Weight: 15.400 Kg

Screening machine PAGUS sieve Ø approx. 2.5 and 5 mm Screen box: 400 x 295 mm approx. 63 stroke per min motor: 0.37 kW 380 V used, tested ! Dimensions: 1200 x 750 x 550 mm

ESC-HIGH PRESS ´PLUS´ E3 Model 0 max. print size: 510 x 720 mm max. sheet size: 520 x 720 mm min. sheet size: 270 x 350 mm gripper margin: 10 mm Additional equipment: - RKS squeegee system - Antistatic device with control unit AFC-2 and SCPB electrodes 530 with cable length 180 cm including connector HV-4 - integrated cleaning station system TEKNEK in the machine inlet - equipped with ESC leading edge feeder A dryer can also be added /listings/3715380-used-wicket-long-term-dryer Find more here - /

I think the machine dates from the 1990s. The machine was used until last year. It has been replaced by a newer machine. Have a nice day, This is an MPM Corporation screen printing machine. The model is as follows: UP2030. Find more here - / Contact us at -

Manufacturer: EKRA Model: X5 Type of machine: Screen Printer Year of manufacture: 2002 Weight: 720 kg Power rating: 230 V, 50/60 Hz Power: 2.0 kW External fuse: 16 A Control voltage: 24 V DC Air pressure: 6 bar Find more here - / Contact us at -

EKRA Drucker X3 Automatic Screen & Stencil Printer is expected to be available at the end of 2024 This system is part of an entire assembly line that can be purchased in its entirety It has a modified hood so that large stencils can also be used. This is the retrofitted stencil cleaning system (stencil underside cleaning). Installed in the machine The X3 automatic screen and stencil printer is specially designed for the flexible production demands of today’s market. The X3 can be used for the application of solder paste and / or glue onto PCBs, ceramics or glass substrates up to a size of max. 460 x 460 mm (18 x 18 inches). The standard EKRA screen and stencil holder has a flexible design which allows it to be used with all common stencils / screens up to 740 mm (29 inches) without use of an additional adapter. Quick clamp adapter systems of various manufacturers can e ...

Circular Screen Feeder Haendle Type BRSH 15 A

Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Find more here - / Contact us at -

1 Deck Resonance Screening Machine - Workshop overhauled and tested

Resonance screening machine / feed chute with perforated sieve Workshop overhauled and tested

ID3475 Binder ES/DD 2500x5 year/Baujahr 2019 Coarse sieve, double decker (45/65 perforation), housing has cracks, incl. motor and supports Coarse strainer, double-decker (45/65 perforations), housing has cracks, incl. motor and supports

Manufacturer: HAVER NIAGARA Model: T-Class U 400x800 1D Year of Manufacture: 2023 Type of Machine: Screening Machine/ Vibrating Screen Find more here - / Contact us at -

Screen deck 2-fold, 60x100cm Coarse/Fine: 3mm/5mm Coarse/Fine 2mm/6mm 4 pieces in stock

CINTEX SENTRY METAL DETECTOR - SPARES COMPLETE FRONT SCREEN MODULE CONSISTING OF METAL WORK, SCREEN AND MAIN BOARD BOXED UNUSED STOCK OTHER MACHINE SPARES AVAILABLE PLEASE DO NOT HESITATE TO ASK

Construction Waste - Coarse – Sieve-SBR 4 Coarse material via rod sizer Fine grain over screen deck Capacity 140 cbm/h Manufacturer: BHS Type: SBR 4 Year of Make: 2020 Drive: 4 KW Weight: 5700 kg Dimensions: 4340 x 2990 x 2900 mm Location NRW Ex-site price net 33,000,-- € I offer as an intermediary on behalf of the owner. The information is non-binding, prior sale is reserved. The offer prices are net. If you don't like the price, please let me know your ideas. I am committed to realizing a price that meets your expectations. I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp) w.goldmannt-online

Knut Schneideer Sewing and Special Machine Construction Screening plant Serial number 001 Immediate availability Location Germany City of Erfurt (on the Haarberg) Number of screens: 3

Hydraulic power unit with pressure accumulator

Tub diameter 1900 mm Collection plate diameter 3200 mm Output depending on material 45 cbm/h

Drive power 75 kW, 1450 rpm Central shaft 6 rpm

Collection plate diameter 1900 mm Volume throughput 12 cbm/h

Screen round feeder with the new vat and overweight gearbox. Tub diameter 1900 mm Throughput capacity 45 cbm

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible.

A screen printing machine ESC (Europa-Siebdruckmaschinen-Zentrum) overhauled in 2004 is available. Print format: 1000mm/1400mm, max. print material thickness: 7mm, max. screen frame dimensions X/Y: 1540mm/1800mm. Documentation available. On-site inspection is possible.

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

Print format: 960mm/1260mm, max. print material thickness: 35mm, screen adjustment X/Y: +/-15mm, squeegee speed: 0.2m-1.2m/s, max. print output: 850 pieces/h, machine dimensions X/Y/Z: approx. 2850mm/2200mm/1350mm. Documentation available. On-site inspection is possible.