screen changer used for sale

Screen AT-T4000, 4-up Conveyor / Bridge

Screen 4300 E year 2006 16 diodes Plate Winding Cycles 136.843 exposure time 7,835 h PC with RIP Harlequin good condition

-Thermal CTP Year 2009 -Plate Count: Approx 39,000 plates done -Exposure Time: 4,500 hours -Internal plate punch system -Blower Unit External Screen BU 800 -Min Plate Size: 450 x 370mm; Max Plate Size: 1160 x 940mm. -Maximum Imaging Area: 1160 x 924mm. Plate Thickness: 0.15 - 0.30mm. -Resolution: 2400/2438/2540 dpi, 16 diodes -Productivity: Up to 10/12 plates/ph at 2400 dpi (dependent on plate type and size) -RIP Screen Trueflow, computer and monitor -Available in April

DAINIPPON SCREEN DIRECT SCANAGRAPH SG-608 II Technical data see photo -Mounting device -2 storage cylinders The system has been upgraded for electronic image transmission. Data imput directly on Macintosh, screen and programs (Photoshop) etc. are included. (A new Mac version was needed for the image editing.) On request, a second scanner of the same type can be provided free of charge for any spare parts.

CTP 4-up Thermal PlateSetter Screen PT-R 4300-E Year 2010 16 channel infrared laser diodes Plate size : Min 324 x 370 mm Maxi 830 x 660 mm Plate Thickness: 0,15 - 0,30 mm Speed: 11 plates/hour at 2400 dpi RIP Harlequin Version 8.3

AGFA Avalon N4-30 (Screen PT-R 4600 S) year 2016 32 diodes 21 plates/h exposure time 23,920 h Running time 35,300 h plate loader without RIP plate processor Glunz&Jensen Quartz III 85 year 2012

General SKU244U279 MakeAllgaier-Werle GmbH LocationBarneveld TypeTSM 2000/2 Main Features MaterialMild steel/Stainless steel Surface2.5 m2 Sizes diameter1850 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface± 2,5 m² Number of sieve decks:2 Sieve sizesDia: 1850 mm With covercheck InletDia: 300 mm OutletDia: 190 mm Drive excentercheck Motor2,2 kW,220/380 Volt, 1410 rpm With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4301 (304) Information No.2450 Year of construction1982 Floor space2,4x2,1 m Total height1,65 m Weight1000 kg Extra Specifications- No sieve deck includedPlastic & polymersTumbler screening machinesFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicRubberOther chemicalStarchGeneric medic ...

General SKU032U183 MakeSuperior B.V. TypeSZV 800/5/6 No.8671 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Surface0.3 m2 Size length580 mm Sizes width480 mm Specified Features - Vibro sieve Vibro sievecheck Sorting and dewatering sieve Sieve surface0,28 m² Number of sieve decks:4 Sieve sizes580 x 480mm With covercheck Inletø 100mm Outlet5x ø 75 mm + water outlet Drive vibro motorcheck Motor2x 0,4 kW, 220/380 V, 980 rpm Sieve perforation7,0mm, 6,0mm, 5,0 mm, 4,0 mm MaterialStainless steel Information Mounted on mild steel framecheck Floor space1,3x1,0 m Total height1,2 m Weight400 KGPlastic & polymersFeed additivesPaper & otherVibro sievesOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicRubberOther chemicalStarchGeneric medicinesPowdered foodsConsume ...

For sale is a used plate screen changer from the manufacturer BD Plast SRL. The screen changer is in a used but well maintained condition. Specifications: - Screen diameter: 250mm - Filter area: 491 cm² - Sealing ring PTFE/ Teflon - Heating capacity approx. 22kW - Number of control zones: 4 - Operating pressure max. 400 to 500 bar - Hydraulic unit designed for quick change - Throughput capability from 800 to 2,000 kg/h - Weight approx. 950 kg incl. documentation, documents, drawings, etc... Screen change can be visited by prior appointment.

Continuous melt filter The Berlyn Corporation, today: Berlyn ECM S/N 109F160

Hydraulic power unit with pressure accumulator

There are 3 identical Maag FSC 160 screen changers available. Screen diameter min./max.: 600mm/200mm, screen area min./max.: 28cm²/314cm², throughput min./max.: 100-1700kg/h, max. temperature tolerance: 300°C, operating pressure: 700bar, differential pressure: 100bar. Documentation available.

Double piston screen changer, double piston screen changer for extruders, co-rotating twin screw extruder, twin screw extruders, plastic injection molding machine -Manufacturer: Anji, Continuous twin-piston screen changer -Type: AJ -Individual components: see photos -Submission/Price: complete -Dimensions: 1140/880/H495 mm -Weight: 313 kg

circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 15 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: size 42 my to 250 my, see photo parts list -Screening machine: Dimensions 1530/1000/H2130 mm -Transport dimensions: 1600/1300/H2130 mm -Weight: 414 kg

circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 5 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: Size 60 my to 2360 my, see photo parts list -Transport dimensions: 1200/800/H670 mm / 1200/800/H800 mm -Weight: 115 kg

Continuously working melt filter New and unused machine Visit possible by arrangement.

For sale pallet changer / inverter /. Capacity - 2000 kg.

Hydraulic hydraulic filter changer. Diameter: 220 mm. Motor: 4 Kw. With head of 43 threads (spaghetti). Hydraulic group with accumulator and electrical panel.

Hydraulic filter changer: 200 mm. With pressure transducer.

Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes: from a machining center BJM type ALBZ-145 -Tool change system -CUT changer -RIG changer: RIG 06-12-P003 VX VCP -Drive motors: MGM -Dimensions: 1400/950/H830 mm -Weight: 380 kg

Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Seco, tool changing system tool arm -Drive unit: TP type MRC-S28-1V-210 -Dimensions: 780/420 / H300 mm -Weight: 66 kg

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm -Town weight: 106 kg

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Swedturn, Type ST12 CNC 300 tool changer -Tool turret: for max. 12 tools -Tool holder: Ø 60 mm -Individual components: see photos -Dimensions: 565/470/H565 mm -Weight: 319 kg

Tool changer chain, chain magazine, tool changing system, tool magazine -for: max. 60 recordings -Hole: Ø 17 mm -Weight: 44 kg

Tool changer chain, chain magazine, tool changing system, tool magazine -comes from a MAHO CNC machining center, type: MC 600 -for: max. 48 recordings -Recording: SK40 -Dimensions: 1630/H450 mm -Empty weight: 325 kg

EQUIPMENT: Fully Automatic Hydraulic Tire Changer Auxiliary arms Easy installation of low-profile, wide-width tyres or run-flat tyres Large clamping range up to 30 inches Ergonomic wheel jack Integrated "Tire Booster" tire inflation system High torque power supply and electrical feedback Voltage: 230V Precise motor speed control 0-14 rpm Special attachment points for mounting tires

Tap Changer, Heating Controller KIEBACK & PETER KNC2 24 V ( 24V ) ambient temp.: 0...50°C New ! Dimensions: 135 x 135 x 45 mm

Hydraulic filter changer - FBM Falzoni brand - Size: Ø 160 mm - With 10 hp (7.5 kW) hydraulic group

Axles X 160 to infinity  Y to max 1300 mm Z up to max 60 mm 6-fold tool changer

Pallet lift table/ pallet turner Manufacturer: Overbeck Year of Make: 2014 Condition: Good (Used) Drive Type: Chain Drive Total length: approx. 1300 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 970 mm Roll width: approx. 945 mm / Usable width: approx. 880 mm Roll diameter: approx. 80 mm Wheels: 7 pieces Wheel spacing: approx. 200 mm Stock: 2 pieces Price per piece Internal Article Number: 2026030301 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or t ...

CNC Machining Center JOHNFORD VMC-850 | Year of construction 2023 | FANUC | 60-fold tool changer Manufacturer: JOHNFORD Model No.: VMC-850 Machine Type: CNC Machining Center Year of manufacture: 2023 Operating hours: approx. 667 h ⸻ CNC control • FANUC 0i-MF Plus • Manual Guide i • Dual Check Safety (safety software) ⸻ Spindle & Tool Changer • Tool changer with double-arm gripper • 60 tool positions • Tool holder: SK40 • Milling spindle: 5.5 / 7.5 kW • Speed: up to 12,000 1/min ⸻ Measuring & Cooling Systems • Glass scales in X, Y and Z axes • IKZ 30 bar through the spindle • Programmable air/water switching • Oil mist extraction, programmable • Renishaw OMP40-2 touch probe (wireless) • Renishaw OTS tool measuring tool setter (wireless) ⸻ Workspace • X-axis travel: 800 mm • Y-axis  ...

Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes from a BJM machining center type ALBZ-145 -Intake: HSK40 -Tool changing system: CTM42 DO 12P3 400 -CUT changer: CUT42-V-90-60-D VX -RIG changer: RIG 06-12-P003 VX VCP IN DA -Drive engines: MGM -Dimensions: 730/700/H450 mm -Weight: 160kg

Tool changer chain, chain magazine, tool changing system, tool magazine -The tool changer comes from CNC machining center make: Hitachi Seiki type: HC400 -Tool changer for: Hitachi Seiki type HC400, other spare parts available. -complete with: gripper arm and drive -Tool changing positions: 80 -Intake: SK40 -Dimensions: 2270/630/H1725 mm -Weight: 860 kg

Tool changer for lathe, tool disk turret, top support, top slide, dovetail guide -for: max. 6 tools -Changer comes from a Gildemeister CNC lathe type: NEF 560 - Tip height: 105 mm -Turning chisel holders: 25 x 25 x 100 mm -Quantity: 2 pieces available -Price per piece -Dimensions: 315/315 / H380 mm -Weight: 87 kg

tool changer for lathe, tool disc turret, turret system, disc turret for lathe -Manufacturer: Sauter, tool changer type 0.5.675.112 from vertical lathe Scherer VDZ 80 DS -Tool turret: Type 0.5.901.012 for max. 12 tools -Servo motor: Siemens type 1FK7063-2AC74-1SB0 -Individual components: see photos -Dimensions: 560/450/H300 mm -Weight: 117 kg

Instep range inside: 12-24, instep range outside: 10-24, rim width: 3-14 inches, max. tire width: approx. 15, also suitable for UHP and run-flat tires (WDK-certified) Auction-ID: 04D-R9X-2

Strokes: X = 635 mm, Y = 510 mm, Z = 460 mm Spindle speed: 20 – 12,000 rpm Spindle power: AC 13/9 kW Fast feeds: 30 m/min Taper: SK40 DIN69871 Tool changer: 20 positions (disc magazine) + 30 position option Table dimensions: 560 x 790 mm RENISHAW probe: OMP40-2, OTS, OMI-2T module Machine hours: 21,788 h Spindle hours: 8,654 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-202

New, Tire mounting/ Balancing machine Auction-ID: A3-43511-40

Strokes: X = 635 mm, Y = 510 mm, Z = 460 mm Spindle speed: 20 – 12,000 rpm Spindle power: AC 13/9 kW Fast feeds: 30 m/min Taper: SK40 DIN69871 Tool changer: 20 positions (disc magazine) + 30 position option Table dimensions: 560 x 790 mm RENISHAW probe: OMP40-2, OTS, OMI-2T module Machine hours: 21,788 h Spindle hours: 8,654 h Lots sold as is, unchecked, without tools or tool holders.

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

Material: stainless steel V2A Engine: 0,25 kW Weight: 200 kg Length x Width x Height 1000 mm x 1000 mm x 900 mm Machine data: Machine in gas-proofed version, with rotating screen-frame; screening area per deck : 0,3 m². Optional: ballcleaning, sreen insert on choice : 0,1 - 2 mm. Very good condition. You can also get the entire system with all components.

Drum sieve used for SM518 new in stock! Used Drum Screen for SM518 new in stock! Punching: 10 mm rectangle; Material thickness: 6 mm perforation: 10 mm rectangle; Thickness: 6 mm Condition: used/ as good as new (screen drum was only used for one test) Condition: used / like new (drum was only for a short test in use) Available: immediately Available: immediately Location: 77966 Kappel-Grafenhausen (near Freiburg) location: 77966 Kappel-Grafenhausen/ Germany (Near Freiburg) We are happy to organize the transport for you! We can arrange transport for you! We also supply new or other used screen drums to all common screening machines (SM620, SM618, T4, T5, Mustang,). Manufactured in our factory in Germany from German, very high-quality, sharp-edged perforated sheet metal. We also provide new or used screening drums for all standard machines (SM620, SM618, T4, T5, ...