scrap used for sale

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerType of gripperDouble gripper Tool changer planevertical Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgSlot width 14 mmDirect mea ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

Mixer,stainless steel,frame agitator with scrape,tiltable,Ø 740 mm.

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

x-travel: 750 mm y-travel: 560 mm z-travel: 600 mm Control: HEIDENHAIN iTNC 530 total power requirement: 70 kW weight of the machine ca.: 11.000 kg dimensions of the machine ca.: m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/1 ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000  ...

punching pressure: 28 t punching cross-cut in cmm: 31 in 7 mm round bar steel: 32,0 mm throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32 ltr. work height max.: 1.033 mm total power requirement: 3,0 kW weight of the machine ca.: 553 kg. dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Quick-change punch device up to Ø 31 mm - green series - - built-in: round punch no.5 Ø 25.0 mm and round die no.3 Ø 25.7 mm - Free: LED lighting in the punching area - swiveling scraper (plates exchangeable) - Various material support tables are available separately - support frame - 2-step foot switch, with double press for grain search function - electrical controls - Infinitely adjustable stroke length and stroke position - Integrated hydraulic unit with oil filling - Performance data apply to a material strength of 450 N / mm² The data for this ad was cr ...

x-travel: 4000 mm y-travel: 2200 mm z-travel: 250 mm Capacity: 3400 bar Number of working hours: 22000 h workpiece width - max.: 200 mm table load: 4 t/m² feed: 84 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 2 heads NR: W 136 scraper conveyor processing plant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

JÖNI MULTIMIX 400 ID.NO. 2140 Jöni Multimix cooking pot 400 liters with stirrer year of production 2013. Includes both scrapers to edges + bottom, Built-in steam generator heats between 15 - 125 degrees. Very nice condition! Dimensions 175 x 125 cm H 120 cm.

Chocolate tank 1,000 kg capacity Stainless steel Double-walled, insulated, heated Agitator with wall scraper: Drive 1.5 KW Heating: 9kW (3x 3kW) with circulation pump Temperature control and display in the control cabinet Price on request

Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...

Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

RECONDITIONED KRAUSS MAFFEI KM 125 ATEX CENTRIFUGE REF.: C3553 Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate with 4 dampers discs type ZPVL 25-45.6 Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. General characteristics: Manufactured by KRAUSS MAFFEI Model KM 125 Type Vertical basket bottom discharge centrifuge with scraper Material Stainless steel 316L Weight 6400 kg Technical characteristics: Download Por el fondo con rascador Basket diameter 1.250 mm Height basket 650 mm Max. load 650 kg Useful load 500 dm3 Max. rotational speed 900 rpm Engine 37 kW - 50 cv

Stop adjustment for Schellinger saw . Due to the frequent requests, the variant New was reissued. Specifications: Hub. 100 mm Lifting capacity. 3000 N (New) Lifting speed 28 mm/s Voltage: 400V 3AC 50Hz Mounting: Piston eye 16 mm body pendulum pin bolt 16 mm Limit switch Adjustable Limit switch Externally designed Thermal protection in the winding Protection class IP54 piston with scraper ring against chip dust

Fritsch pastry line Type: Euroline with calibration head with guillotine with croissant rollers 3 & 5 rows Donut / Panncake Roller with different cutting rollers with foot switch with scraper with treadmill Good condition many accessories Height max. 200cm Width: 800cm Depth: 100cm

pressure: 80,0 / 110 t punching cross-cut in cmm: 27,0 in 20 mm L-beam: 120 x 13 mm L-beam: T 120 x 12 mm shear: flat material: 500x18 / 400x19 mm throat: 510 mm work height max.: 1050 mm total power requirement: 6,5 kW weight: 1650 kg range L-W-H: 1750 x 850 x 1850 mm very good condition () Furnishing: - hydraulic, combined profile steel shears with release station with punching station .. punching capacity 800kN Flat steel shears .. Shear capacity 100kN Angle steel scissors Angle steel knife for cutting 90 ° & 45 ° miters Cutting angle steel + T-steel + I-steel - Support table at the notching station - Scraper at the punching station - Freely movable foot switch - Central lubrication - Safety devices - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock# U2428-3 Used horizontal cooker by Berief Gmbh & Co. KG. with total volume 800 l. Cooking chamber has internal dimensions: diameter 1000 mm x lenght 1000 mm. Machine is rated for work on temperature up to 100 C inside the chamber. Heating channels have volume 55 l and are designed for work on pressure up to 10 bar and temperature up to 184 C. Tank is insulated and layered with stainless steel. Machine has mixing shaft with bolted 6 paddles, each one equipped with wall scrapper, and two side wall scrappers. Shaft is chain driven by el. motor 3 kW and gearbox. Discharge of tank by tilt, operated by el motor 0.55 kW. Top inlet has dimensions 100 cm x 54 cm, and is equipped with safety stainless steel bars and stainless steel cover. Machine is mounted on two supports integrated with drive and controls, however controls need rebuilding. Machine last time used in food industry.

Vertical basket bottom discharge used centrifuge with scraper, mounted on inertia plate. Type RINA 300F-1000 manufactured by RIERA NADEU. It belongs to the 300 series for liquid-solid automatically separation processes.

Reactor tank with 16,000 liter capacity agitator, blade agitation system and scraped bottom. Prepared to mount on a bench with a weighing system with 4 load cells. Engine power 18.5 Kw. Model: DR-16 Weight: 3,800 kg Width: 2,550 mm Height: 5,200 mm

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

Lid FP1 Geometrically overhauled New bellows, scrapers, chains. Bevel gear set in the head New 3 axis digital display Engine with brake Emergency Stop Switch X- 300 mm, Y 150 mm, Z- 340 mm

Drum magnet, drum magnetic separator, magnetic drum, magnetic filter, magnetic roller, magnetic separator, metal detection, magnetic separator, metal-free, plastic, blasting material, wood chips, cable granules, plastic granules, recycling Drum magnet - magnetic separator without housing incl. separating plate + high-quality stainless steel execution + Scraper plates / webs for separation Drum: Ø 220x500mm On request, the appropriate housing, standing bearing unit, drive, etc. can be obtained from us. Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conv ...

Drum magnet, drum magnetic separator, magnetic drum, magnetic filter, magnetic roller, magnetic separator, metal detection, magnetic separator, metal-free, plastic, blasting material, wood chips, cable granules, plastic granules, recycling Drum magnet - magnetic separator in the housing incl. separating plate, drive and gearbox + high-quality stainless steel execution + Separating plate for separation + Shaft trestle for fixing the fixed shaft + Drive: three-phase geared motor from Gemoteg / SevaTec / SEW possible + Standing bearing units + Output "magnetic" / "non-magnetic" Dimensions: L: 420mm W: 280mm H: 380mm Inlet: 365x80mm + high-quality stainless steel execution + Scraper plates / webs for separation Drum: Ø 220x400mm On request, the appropriate housing, standing bearing unit, drive, etc. can be obtained from us. Our core competence lies in providi ...

Key data: 820 mm, 2000 mm, 515 mm

We offer an exceptionally good precision lathe here. The machine is probably the best German lathe that has been built in this class. BOEHRINGER Precision Lathe Model DUE 800 Year of construction: 1984 Ma.-No.: 04041.01-807 Center height: 400 mm Circulation diameter over bed: 820 mm Circulation diameter via face slide: 515 mm Center width: approx. 2200 mm Effective turning length: approx. 2000 mm Bar clearance: 128 mm Spindle head DIN55022 size 11 Drive power: 30 kW Max. torque: 6300 Nm 24 speeds: 7.1 – 1400 rpm. 60 face feeds: 0.05 – 28 mm/rev 60 longitudinal feeds: 0.06 – 56 mm/rev Trustock quill stroke: 280 mm Tailstock taper: MK 6 Space requirement: LxWxH approx. 6700x2500x2250mm Weight: approx. 7500 kg Accessories: 3-axis digital display HEIDENHAIN coolant device; Chip protection rear wall, power chuck Autoblock 500 mm with clamping jaws ...

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Non-stick spray system Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication Powertouch control

Ott Edge Banding Machine Profimatik M 257-FÜ with pre-joining used, good condition Make Ott Type Profimatik M 257-FÜ Year of construction 2001 Banding thickness 20 / 25 mm Banding height 60 / 65 mm heated inlet ruler Thick edges up to 20 / 25 mm Caps from the roll up to 3 mm Pre-joining with DIA tools 2 x 1.8 kW Cross-cut unit 0°/20° - 2 x 0.8 kW Flush milling 2 x 2.2 kW Bevel milling 2 x 0.6 kW Radius milling 2 x 0.6 kW Radius Scraper Blade Copy corners 4 x 0.8 kW Grinding unit Edge finishing (buffing) Auto. Edge magazine Feed rate infinitely variable 8 - 24 m with motorized adjustment Granulate high-speed heating basin (EVA) Route control Program control with 98 programs Soundproofing hood Large roller support High-speed heating basin with automatic Synchronization and counter-rotation control of the glue roller Automatic ...

Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment

Travel XYZ: 3500/1000/750, 3-axis, speed range: 15000 rpm, tool magazine/tool holder: 40/SK40, control: Heidenhain TNC 426, chip conveyor: scraper belt conveyor. The machine is fully functional and can be inspected on site during operation.

Type: S200 Vacuum Filling Machine Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Length: 130 Height: 210 Delivery time: 20 working days after advanced payment

Chocolate tank, 2013, Stainless chocolate melting tank, 500L, agitation with scrape surface, adjustable temp controls, mounted on stainless skid, 3Ph

Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards

X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.

Anko BFK-10 Automatic stir fryer Capacity 60l, gas LPG, with a scraper and stirrer to scrape liquid eggs and stir fry ingredients, automatic temp control, variable speed, automatic tip discharge, suitable for cooking fried rice, fried noodle, dried meat cracker, dried meat floss, jerky, fried ground meat, ham, dried squid, steak, coffee, peanut, powder, bean, sugar coating, tea leaf, sesame, tofu, sticky rice and more, 3Ph

Bear weight: 500kg, lifting speed: 120/min, connected load: 45kW, with documentation, the scraper is defective, the dovetail is broken, an on-site inspection is possible.

Woller width: 2500mm, product width: 2200mm, with fabric centering, spare scraper sets (24 rollers) and other spare parts, a second machine is available as a source of spare parts.

With boiler scraper; Lacquered finish; Already dismantled; Analog control;

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Standard double screw housing Machine dimensions in cm: 200x120x200 Delivery time: 10 working days after advanced payment

Continuous vacuum filler for straight filling and portioning Machine features: All-in-one 250 l hopper with counter arm and reinforced scraper, Integrated vacuum pump 20 mᶟ Double screw Standard double screw housing Control: РС Program memory for 99 filling programs, Portion weight: from 5 up to 60 000 g Lifting and tipping device for HPC with 250 l hopper To fit standard trolley, 200 l capacity Machine dimensions in сm: Width: 134 Length: 220 Height: 200 Power: 9,5 kW Voltage: 380 V, 50 Hz Weight: 1300 kg Delivery time: 10 working days after advanced payment

NNP 500l mixing vessel Stainless mixing vessel, 500l capacity, top mounted motor with agitation and scrape surface, loaded on weigh cells, central bottom discharge with side chute, 3Ph

Servomotor Yaskawa SGMG-09V 2A with pulley AT5 Z=21 32 taken from an scm Record 120/ 220 during scrapping 2736210541F

Vacuum processing plant Manufacturer: Fryma Type: VME-6 Machine No: F17.3750 Year of construction: 1977 Pressure double jacket: 0.5 bar with integrated heating pneumatic vertical stroke Temperature gauge with vacuum pump with vessel (movable) Scraper agitator, dissolver mixer, colloid mill Mounted on a mobile frame with operating instructions Usable volume: 6 l LBH: 850 x 600 x 1350 mm Weight: approx. 150 kg