scrap used for sale

Manufacturer: Ziehtec, Type: Ziehklinge mitfahrend, Design left: oben und unten, Design right: oben und unten, Flat scraper: yes, Controllable: yes, Tracing by roller: yes, Pulling: ziehend und schiebend, Chain track/upper pressure: Anbaugerät, Run on the machine: IMA, Price per unit Euro: 2250,

used barrier scrap shears Manufacturer: Schlüter Type: BS 1 Year of Make: 1973 specifications: Performance with a material strength of 40 kp/mm²: Round bar: up to 40 mm Square bar: up to 35 mm Sheets: up to 15 mm Pipes up to 6 mm wall thickness: 300 mm Railway sleepers: all normal grades Angle iron: 100 x 100 x 10 mm Knife Dimensions: Knife length: 600 mm Knife opening front: 310 mm Knife opening rear: 140 mm Cutting rate: 30/min. Drive power: 7.5 hp / 5.5 kW Dimensions: Length: approx. 4,000 mm Width: approx. 1,400 mm Height: approx. 2,000 mm Weight: approx. 3,600 kg Description of the machine: Due to the extremely large blade opening, it is particularly suitable for light, bulky scrap. It is designed in a mobile version with drawbar and has a shear coupling as extensive protection against overloading. High ...

Stock number: A217, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger , Standing: 4 pcs. legs, Motor: 2,2 kW, Total height: 2600 mm., Connections: 4 pcs. Ø 2, Manufacturer: APV

Stock number: A144, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scrabed surface heat exchanger, Motor: 9,2 kW - 212 rpm. - Gear motor, Connections: Ø 1, Manufacturer: Brogli, Type: Agitemp

Stock number: A216, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger , Standing: 4 pcs. legs, Motor: 2,2 kW - 380 Volt, Total height: 2150 mm., Connections: 4 pcs. Ø 2, Manufacturer: APV, Model/type: VT 460, Year: 2000

Stock number: A051, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger, Manufacturer: Gerstenberg & Agger A/S, Type: Labo Perfektor 1x57 B/L, Other: 4 zones

Stock number: A052, ., ., Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger set, Construction: Horizontal lying in stainless steel cabinet, Tube size: 2 x Ø 160 x L 1500 mm. - Two tubes, Motors: 5,5 kW - 220/380 Volt - 148 rpm. - Gear motors, Manufacturer: APV Pasilac, Type: SSHE 2HD 672

Stock number: A050, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Scraped surface heat exchanger set, Motor: 3 HK - 160-640 rpm. - Adjustable speed, Manufacturer: Votator, Type: 1C 624 L, Other: 2 zones

Chip conveyor, scraper conveyor with coolant tank BMF type KF 200 K17Ident. No: 0495078 Order No: 915979 year of construction 1992Metal link width 200 mmDistance driver bars approx. 380 mmLength of possible chip removal 1100/2100 mmInsertion length approx. 1350 mmInsertion height 370 mmInsertion width 460 mmHopper width at the top 400 mmHopper width at the bottom 170 mmConveying height - discharge height approx. 1250 mmMotor power belt drive 0.37 kWNetz connection 400 volts, 50 Hz- Drive of the scraper chain via geared motor-

2-SHAFT SHREDDER - HEAVY DUTY, The machine is constructed in sturdy carbon steel and is complete with a supporting structure (1.400 mm heigh) and a loading hopper prepared to receive material from a spider or a belt, size 2.500 x 1.500 x 1.200, Shredding chamber mm.1500 x 900, independent shafts 1.500 mm long, shafts are driven by independent electromechanical motors., 2 x 75 kW motors, The maximum installed power is used to absorb load peaks. Normally, absorption will settle at values around 50% of the installed power., Shafts speed 13-15 rpm, N.15 knives 100 mm thick with 4 hooks, Automatic inversion on overload, Automatic lubrication pump, Tolerance : iron rods with a maximum thickness of 4 mm (up to 3%-4% of the total material), Electrical panel with PLC, Cabinet dimensions: L 1800 mm, H 2000 mm, D 500 mm., installed power - used power in work: about 60-65% : 150 kW, availability: ab ...

General SKU354T1373 MakeSchroder Kombinator LocationBarneveld CEcheck TypeVEMK 01/108-350 Main Features MaterialStainless steel Volume1.8 Ltr. Motor3 KW Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4571 (316Ti) Scraped surface heatexchangers Mixercheck Capacity1,8Ltr. Information No.11/4053-1-182757 Year of construction2002 Floorspace1,7x0,65m Total height1,7m Weight380kg Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to  ...

ID3713 SCS 10.920 hours/hours Mobile Scrap Shear Mobile scrap shears

General SKU354T1003 MakeChemtech International Ltd LocationBarneveld CEcheck Type212W and WH 35F Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm Information No. CC9816-01 and CC 9816-07 Ye ...

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Manufacturer: Recuperma Model: RECU 3 Year of Manufacture: 2014 Type of Machine : Scrap Baling Press Technical Specifications - Bale Size: approx. 400 x 400 mm - Main Drive: 2 x 90 kW (400V, 50Hz) - Overall Dimensions (L x W x H): 6950 x 8900 x 5500 mm - Press Box (open): 2300 x 1500 x 1300 mm - Total Weight: approx. 77.5 t (without oil) - Color: Blue Hydraulic System - Operating Pressure: 315 / 335 bar - Hydraulic Power Unit: Recuperma - Control Valves: Moog - High-Pressure Pump: A4V Axial Piston Variable Pump - Tank Volume: approx. 5000 litres hydraulic oil - Oil Grade: HLP 46 - Auxiliary Drive: approx. 15 kW cooling and filtration Cylinder Configuration - Pre-compaction Cylinder: diameter 280/200 mm x 2400 mm stroke - Intermediate Compaction Cylinder: diameter 320/250 mm x 955 mm stroke - Final Compaction Cylinder: diameter 380/280 mm x 2325 mm stroke - Door Cylinder: diamete ...

With rotating Teeth. Be welded CW 30 connection Auction-ID: A1-47381-208

Liebherr A 308 wheeled excavator – extensively equipped Technical data Manufacturer: Liebherr Type: A 308 Year of Make: 1997 Engine: Deutz diesel engine, 53 kW Operating hours: approx. 7,200 h Previous owner: 2nd hand Facilities All-wheel drive All-wheel steering & crab steering 2 double-acting hydraulic functions on the boom Free return for hydraulic attachments Hydraulic quick coupler (restocked and bushed approx. 20 hours ago) Heated seats Camso WEX552 Tyres 9.00-20 Cab with good all-round visibility Maintenance Complete oil service carried out approx. 300 hours of operation ago (engine, hydraulic, axle and transmission oils) Scope of Delivery Hydraulic swivel scraper, 150 cm Clamshell grapple / sorting grapple, 60 cm The wheeled excavator has been regularly serviced and is in an immediately read ...