scrap baler used for sale

Manufacturer: Homag, Type: KAL 310, Year: 2004, Control: NC 21, Software: Homag, Min-max edge material mm: 0,5-3, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 24, Axis control: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: einfach, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: lyes, Corner tracing type: FK 11, 2 motors: 2, Radius scraper: yes , Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Cleaning nozzles: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Workpiece support: yes, Machine lenght mm: ca.9,5, Noise enclosure: yes, Return type: Bargsted ...

Manufacturer: Ilcam Kantenbearbeitung, Year: ca.1990, Monting of the machine: Verleimteil/Kappen/Vorfräsen/Zieklinge, Min-max edge material mm: 0,5-12, Work piece width min-max mm: 65, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 10-20, Premilling: no, Fine milling: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Year :ca.1990

Manufacturer: Brandt , Type: KD 79/2 CF, Year: 2002, Min-max edge material mm: 0,5-3,0, Min-max feed m/min: 18, Axis control: no, Premilling: yes, Fine milling: yes, Application of separation agent: no, IR zone: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Year :2002

Manufacturer: IMA, Type: Multifunktionsziehklinge 4-fach, Scraper radius: 4-fach, Tracing by roller: yes, Automatic radii change: yes, Pillar construction: yes, Installation height: 700, Used: yes, Installation height: 700, Length mm: 500,

Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003

Manufacturer: Heesemann Cefla Türenlackieranlage, Type: Cefla Robot, Year: 2004, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, by rollers: yes, by scraper: yes, Dry exhauster: yes, Jet dryers (number): Hochtrockner, Sanding machines (number): 1, Brushing machine: no, Design sanding machine no 1: Querband/Längs/längs, Dust exhaust (number): yes, UV dryers - 3 lamps inclined (number): yes 120 Watt, Jet dryers (number): Hochtrockner, High dryers (number): 32, Length of pallets mm: 5500, Feedin speed m/min: 3-6, Year :2004

Manufacturer: Cefla, Type: Spaybotic, Year: 2003, Control: cefla, Spraying line: yes, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 150-4500, Min.-max. workpiece height in mm: 10-100, Working widht max mm: 1400, Spraying machine: 1, Spraying heads - total: 4, Farbmanagment: yes, work piece detection: yes, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer system - airless: 2, Laquer system - airmix: 2, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Year :2003

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Manufacturer: IMA, Type: Compact P/C F 6220, Year: 1996, Control: Imatronic 121, Min-max edge material mm: 14-55, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Min-max feed m/min: 8-20, Infeed table: yes, mit Vakuum: 2 X 3 kw, Power per lamp: 1-fach, kW Leistung Laser: yes, Coil magazine: yes, Strip magazin: yes, Bevel milling: MFA. 8.346, radius milling: yes, Magazin : yes nicht schwenkbar, Vertical grooves: R 3 und R 2, Nuten : yes, Radius scraper: yes, Type of scraper: 8.50, Spraying system 2: yes, Edge sanding: Rolle, Buffing unit: Ja, Free places: yes, Year :1996

Manufacturer: Homag PU Verleimung , Type: KL 79/2/A20/S2, Control: Homatic NC 21, Work piece width min-max mm: 60, Min-max feed m/min: 10-25, Axis control: Einlauflineal, Einlauflineal gesteuert: yes, Premilling: yes, Fine milling: yes, Application of separation agent: yes, IR zone: yes, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Corner tracing type: FK 13, 2 motors: yes, Vertical grooves: 2, Grooves, slewable-controlled: yes, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Spraying system 2: yes, Ersatzverleimteil : PU, Bonding part EVA: yes, Edge sanding: KS 10, Profile sanding top bottom: yes, Buffing unit: yes, Top pressure belt/roller: Band, Work piece refeeding: Bartgstedt ZHR, Compressed air bar: 6,

Manufacturer: Homag , Type: KAL 310/7/A3/S2, Year: 2004, Control: NC21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 55/100, Min.-max. workpiece height in mm: 12 - 60, Edgeband height max mm: 60, Min-max feed m/min: 10-30, Axis control: Verleimteil/Druckzone/Formfräsen, Servo Einschubtisch: yes, mit Vakuum: 2x 3Kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2 Rollen, Coil magazine: HL 84, Strip magazin: 2 X0,55 kW, Min.-max. batten magazine mm: 2 X 0,4 kW, Mitre stations: yes, Bevel milling: FK 11/Verstellung automatisch, radius milling: 0,55 kW, Vertical grooves: PN 20, Radius scraper: yes, Rolling chain: yes, Spraying system 2: yes, Ersatzverleimteil : 5, Edge sanding: Riemen, Edge sanding radius: yes, Free places: yes, Year :2004

Manufacturer: Homag, Type: FKR 78/C/A/S3, Monting of the machine: zerspanerteil zum Einkürzen, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 10-40, Min-max feed m/min: ca.18, Infeed table: yes, Premilling: yes, Fine milling: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Work piece refeeding: Bargstedt, Roller/belt: Riemen, Compressed air bar: 6, Return type: Bargstedt TFU,

Manufacturer: Hebrock, Type: AKV 2001 DK, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: 8, Coil magazine: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: Radius, Corner tracing type: yes, 1 motor: yes, Radius scraper: yes, Bonding part EVA: yes, FREE TEXT: Zustand sehr gut, Year :1997

Manufacturer: Brandt, Type: KS 23, Year: 1988, Min-max edge material mm: 0,5-12, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 12, Premilling: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Edge sanding: yes, Year :1988

Manufacturer: Brandt, Type: KD 99, Year: 1998, Control: Homatic, Min-max edge material mm: 0,4 - 3,0, Work piece width min-max mm: 62, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 60, Edgeband height max mm: 62, Premilling: yes, Bevel milling: yes, Corner tracing type: yes, 4 Motoren: yes, Nuten : yes, Radius scraper: yes, 4 Motoren: yes, Compressed air bar: 6, Machine lenght mm: 8740, Noise enclosure: yes, Rückführung Typ: yes, machine ready for demonstration: yes, Year :1998

Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze:  ...

Manufacturer: Spritzstrasse Giradina, Type: Frontenlackieranlage, Year: 2005, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 5-60, Work piece length min-max mm: 100, Geamtlänge Meter: ca.30, Feeding speed m/min: 2,5-5, UV-Strasse: yes, Wasserlackstrasse: yes, Conveyor belts: 2, Schleifmaschinen: kein, Enstaubungsmaschinen: 1, Spraying machine: 1, UV dryer: yes, Anzahl Lampen: 3, Jet drier: 1 MOS Trockner<CRLF>1 Düsentrockner, Outlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Spraying heads - total: 8, work piece detection: yes, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer circles: 2, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Jet drier length in mm: 10000+17000, Outlet conveyor: yes, FREE TEXT: Inkl ...

Manufacturer: IMA OBK, Type: OBK, Year: 1996, Premilling: yes, Profile milling: yes, Profil sanding: no, Edgeband thickness max mm: 60, Thickness of coiled edgeband max mm: 1, Panel length min mm: 300, Work piece thickness min mm: 100, Feeding speed max m/min: 5-30, Machine lenght mm: 11000, Pressure zone star: yes, Pressure zone exchange system: 4-fach, Strip magazin: no, Trimming saw: yes, Flush milling: yes, Scraper: yes, Buffing unit: 2 Stück, Glue system granulate/cartridge: granulat, Spraying device: yes, Noise enclosure: yes, Compressed air bar: 6, Maschine kann vorgeführt werden , Year :1996

Manufacturer: Homag mit Doppelenprofilerformatteil, Type: KFL 23/03/27/PU/30+ZHR 05, Year: 2000, Program: NC 21, Control: Homatig, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 250-2600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-55, Edgeband height max mm: 60, Min-max feed m/min: 30, Finished product: Fronten Küche, Axis control: yes, Infeed table: yes, Einlauflineal gesteuert: yes, Premilling: Schutzfräsen/zerspanen/zerspanen, IR zone: yes, Coil magazine: 2 X 24 fach, Strip magazin: no, Min.-max. batten magazine mm: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: FK 13/6 fach, Grooves, slewable-controlled: 2, Radius scraper: yes, Type of scraper: yes, Scraper with axis adjustment: yes, Cleaning nozzles: yes, Bonding part EVA: PU Verleimteil, Number of tools per tool-m ...

Manufacturer: IMA, Type: Compact/U/812/F, Year: 1996, Program: IMA, Kantenmaterial : 0,4-12, Work piece width min-max mm: 70, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 8-50, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 15-25, Vorwärmeinheit IR: yes, Premilling: yes, Panel length min mm: 200, Leistenmagazin min-max mm: yes, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : yes, Contour milling type: yes, Eckenkopierfräs Motore: 4 Motore, Nutfräsen: yes, Number of sanding units: 3, Kantenschleifen: 1, Profilschleifen oben unten: yes, Radius scraper: yes, Flat scraper: yes, Top pressure belt/roller: Rolle, Year :1996

Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: yes, Circulating-air drier mm length in mm: ca.12000, machine ready for demonstration: yes, FREE TEXT: inkl 2 Lampen UV 120 Watt Trockner/12 Kremlin Pumpen /Pistolenwaschgerät und walzmaschine Sorbini Smartcoater, Year :2006

Manufacturer: IMA , Type: Advantage 5620, Year: 2001, Program: IMA, Control: IMA, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 70-1300, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 45, Min-max feed m/min: ca. 20, Premilling: yes, IR zone: yes, Lasertechnik: yes, Kw-Leistung Laser: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: yes, Grooves, slewable-controlled: yes, Type of scraper: yes, Cleaning nozzles: yes, Edge sanding: yes, Profile sanding top bottom: Rolle, Roller/belt: 6, Year :2001

Manufacturer: Biesse , Type: Stream B1 S3, Year: 2005, Control: NC 1600, Min-max edge material mm: 20, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 60, Min-max feed m/min: 25, Min.-max. batten magazine mm: 20, Bevel milling: yes, radius milling: yes, Radius scraper: yes, Buffing unit: yes, Year :2005

Manufacturer: Cefla Rotorstain, Type: Rotor, Year: 2005, Control: Cefla, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, work piece detection: yes, Conveyour system: Band, Spraying stations: 16, Schnellwechselsystem : yes, Gun carrier: 16, Pumps: 2, Laquer system - airless: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

Manufacturer: IMA, Type: Compact PC/KIF 7220, Year: 1997, Programm: yes, Achsensteuerung: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: yes, Strip magazin: yes, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: yes, Number of tools per tool-magazine: no, Radius scraper: yes, Flat scraper: yes, Buffing unit: yes, Moulding units swivel-mounted: yes, Schwenkbereich Grad: 45-90, Top pressure belt/roller: Rolle, Feeding speed max m/min: 10-20, Compressed air bar: 6, Year :1997

Manufacturer: IMA Kantenbearbeitung , Type: U/F 720, Year: 1995, Programm: yes, Achsteuerung: no, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Edgeband thickness max mm: 3, Edgeband height max mm: 60, Work piece thickness min mm: 70, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Coil magazine: 12, Strip magazin: no, Premilling: yes, Power per lamp: yes, Glue system granulate/cartridge: Granulat, Soft edge single side: no, Mitre stations: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Feeding speed max m/min: 10-25, Compressed air bar: 6, Year :1995

Manufacturer: Homag, Type: KAL 310/7/A20/S3 , Year: 2011, Control: PC 22, Software: Windows XP/Woodscout, Barcode: möglich, Min-max edge material mm: 0,3-3,0, Work piece width min-max mm: 12-60, Min.-max. workpiece height in mm: 12-60, Min-max feed m/min: 18, Axis control: einlauflineal, Infeed table: Servo, Servo Einschubtisch: yes, mit Vakuum: 2 X 3 kw, Profile milling: yes, Machining cracks: yes, Power per lamp: 2-fach, Laser technology: yes, kW Leistung Laser: yes, Coil magazine: HL 84, Strip magazin: 2 X 1,5, Bevel milling: FK 8-fach Wechsler, radius milling: FK 13/Achsverstellung, Vertical grooves: Multiziehklinge MN 21 3 Profile, Grooves, slewable-controlled: PN 10, Nuten : yes, Radius scraper: yes, Servo copying: yes, Spraying system 2: A 20, Ersatzverleimteil : 5 kg, Number of sanding units: yes, Profile sanding top bottom: Einlauf und Auslauf, Barcode: möglich, Workpiece supp ...

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

Manufacturer: Giradina, Type: Dualtech, Year: 2007, Control: Programm, Spraying heads - total: 4, Working width mm: 1350, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Einlaufband: yes, Feeding speed m/min: 2,5-7,5, Wight approx. kg: 6000, Year :2007

Baler Bollegraaf HBC 100 A, built in 2001 Specifications: Manufacturer: Bollegraaf Type: HBC 100 A Year of construction: 2001 Press force: 100 t Drive power: 75 kW Filling opening: 1100 x 1600 mm Capacity at 30 kg/m³: 16.2 t/h 50 kg/m³: 25 t/h 100 kg/m³: 47 t/h Bale size: 1100 x 720 mm (WxH), length variable Bale weight: 550-880 kg Binding: 5-fold vertical Dimensions: approx. 11750 x 2500 x 3470 mm (LxWxH) Weight: approx. 34000 kg

• For vials/bottles diam. 16-78 mm, height max. 220 mm, output max. 350 objects/min • Label length 15 - 200 mm, height 10-100 mm, label roll diam. max. 400 mm • Hot printing device Graseby Allen • Operation from left to right • Dispensing table adjustable in height, depth across direction, inclinaton across direction • Code reading Laetus Argus 6 • Bad discharge in scrap tray by air nozzle • Separating screw for vial diam. 24 mm, height 40 mm • Counter, control for feeding rotary table (rotary table not attached) • PLC Siemens S5-95U • Electr. connection 400V/50Hz

• Vacuum mixing and kneading system with 2 planetary mixing shafts and 1 wall/floor scraper. • Particularly suitable for the preparation of highly viscous pastes and sealing compounds, consisting of a high-speed (speed 200-2,500 rpm) and a low-speed agitator (speed 20-200 rpm) • Speed planetary disc 7-84 rpm • Mixing tools 2x cross beam and 2x butterfly, possible combinations cross beam on both sides, cross beam and butterfly, butterfly on both sides • High-speed mixing shaft with reversal of direction of rotation • 2 containers each with a total capacity of approx. 18 l, usable capacity 5-15.0 l (depending on product) • Container diam. 270 mm, depth 316 mm, total height 335 mm • Heating/cooling jacket, max. operating temperature 90°C, without heating/cooling device, designed for factory water • Hydraulic container lifting/lowering device • Press-out device, ...

GIDUE Xpannd 1KF 5K0  Flexo/Offset - label printing machine  Year 2010  Max material Width: 370 mm  Max printing Width: 360 mm Equipment:  Unwinder  N. 5 Offset printing units with ink keys remote control  N. 1 Hot foil unit  N. 2 Flexo printing units (one can be screen printing unit)  N. 1 Rotary die cutting unit with Gap Master  Scrap rewinder  Rewinder Accessories:  Offset printing cylinders: 5x (21" – 22" – 23" – 24" )  Flexo printing cylinders: 2x (21" – 22" – 23" – 24" )

• Vacuum mixing, dispersing and homogenizing plant • Mixing vessel useful volume 65-250 l, vacuum proof -1/2 bar, perm. operating temperature 138°C, double jacket • Lid hydraulically liftable/lowerable • Homogenizer in the bottom of the vessel, enables suction of liquids and powders, output 9 kW, speed 1,000-3,000 rpm • Counter-rotating planetary agitator with scrapers, output 7,5 kW, speed 7.5-75 rpm • Transfer and discharge piping • CIP cleaning • Vacuum and cooling/heating by external supply • Product contact parts made of 1.4571/AISI 316 Ti • PLC Bosch CL300 • Screen with membrane keypad • Various new gaskets as accessories • Drive 230/400V/50Hz

We sell a used system of recycling machines with the following components (built in 2004): - Chip crusher type RS 300 E with coarse part outlet (Steimel) - Scraper belt conveyor with torque cut-off (DGS) - Chip centrifuge AZ - 250 (ARP) - Vacuum valve VSS 100 (ARP) - Pump sump (ARP) - Vibrating sieve -Switchboard The facility is fully functional and can be picked up.

Extruder with screw diam. 60 mm.35 L/D, for LDPE HDPE LLDPE PP PC PS ABS EPS EPE XPS Complete with scrap silo with agitators on bottom Connecting screw to crammed feeder Crammed feeder with vertical screw extruder with 60 mm screw 35 L/D n.1 vacuum degassing pump Semi-automatic non stop hydraulic screenchanger Water ring pelletizing unit Drying centrifuge Vibro classifier electric cabinet Total installed power 86 kw Used 50 kwh Average production rate 110-150 kg/h depending on material and feeding rate The line is offered as is or reconditioned

Key data: 100 t

Bussmann Press HPK 100 Machine number: M 36 65 Offer here a Bussmann frame press on type 100 /5 The press ran until the last minute and only formed sheet metal It has many safety-related devices installed Has been scrapped due to new acquisition from ongoing operation Pressing force: 100t Retraction force: max. 14t Injection piston pressing force: max. 40t Lower piston stroke: 200 mm Stroke upper piston: max. 400 mm Table width / installation width: 650 mm Table depth / installation depth: 650 mm

Specifications Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW the safety level 2+1 wg DIN 32757 P-3, O-2, T-2 wg DIN66399 pt. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW Machine is fully functional, after technical supervision. Price also includes paint renovation.

Year of construction 1996, hyd. Pivotable with spring-loaded rubber scraper bar, suitable for wheel loaders, skid steer loaders, municipal vehicles

Sheeting machine Model: Rondo SFE 6605 Computer Control / Touch Panel for all doughs for rolling out and touring Stainless steel Rolling thickness from 45 to 0.2 mm electric flour up to 635 mm product width with new scrapers and new belts DGUV V3 tested Machine mobile with brake Connection 400V, 1.1 kW, 16A-CEE plug Used machine cleaned and inspected Great bakery machines in stock!

Sheeting Machine Combi Rondo Doge TOP Model: SKO 611 for all doughs for rolling out and touring with program control, LED display Extendable table left, belt width 635 mm Roll opening 0.3 to 45 mm Active pressure plate with handwheel adjustment with long roller / long knitter at the bottom with train for wrapped products Mobile dough sheeter with brake all belts and scrapers NEW DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 2210 x 1175 x 1383 mm, WxDxH Used machine overhauled with 6 months warranty Lots of bakery equipment in stock!

Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.

Single-sided edge banding machine for machining of straight workpiece edges and for banding and post-processing of various edge materials in longitudinal and transverse passing. Automatic conversion from radius to chamfer and different edge and workpiece thicknesses. Control Power Control PC 22 OVERVIEW OF UNIT ASSEMBLY: – RELEASE AGENT SPRAYING UNIT – JOINING MILLING UNIT – GLUING PART A20 WITH 2 ROLLS Application unit PU 65 (Teflon-coated for PU gluing) – CROSS-CUT UNIT HL84 – PRE-MILLING UNIT – FK11 SHAPE MILLING UNIT – FREE SPACE UNI MILLING UNIT UF10 – PROFILE SCRAPER PN10 – FINISHING UNIT (with detergent information) – Feed rate 20 m/min – Total length 8635 mm 2. WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 12-22 mm ¦ 60 mm – For workpiece thickness 23-40 mm ¦ 105 mm – Workpiece protrusio ...

The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.

• Useful capacity 663 l • Double jacket 48 l • Operating temperature 160°C • Operating overpressure tank -1/2 bar • Double jacket max. 6 bar • Container can be tilted for emptying • Lift lid for emptying by external lifting device (not included) • Parts in contact with product made of stainless steel 1.4435 (AISI 316 L) • Propeller agitator 2.6 kW • Anchor agitator with side scraper 2.2 kW • Temperature display • Pressure gauge • Hose connection in pressure lid with spear tap • Sight glass • Lighting • Pressure fittings • Drive 380V/50Hz

Baler Macpresse MAC 111 AS / 1 with Wirbulator, built in 2014, currently undergoing an overhaul Specifications: Manufacturer: Macpresse International Type: MAC 111 AS /1 Year of construction: 2014 Press force: 170 t Drive power: 2 x 90 kW Mains voltage: 400 V / 50 Hz Filling opening: 2100 x 1020 mm Press chamber volume: 3.2 m³ Bale size: 1100 x 1100 mm (H x W) Throughput / Mixed paper: 35–40 t/h Binding: 5-fold horizontal Transport dimensions: approx. 12,500 x 2,300 x 2,845 mm (L x W x H) Press weight: approx. 46,000 kg Note: the control cabinet is from 2008.

1 piece of used scraper / scraper Manufacturer: Liebherr Type: LSM 16/11 Completely overhauled/repaired in 2022 Year of construction 2009 In perfect condition AT CALL Location: Southern Germany Price on request Offer and prices are purely net ex location Subject to prior sale, errors and/or misrepresentations excepted, without guarantee and/or warranty, as seen, lying and/or standing

Key data: 299 mm, 620 mm, 150 mm

Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...