scm st 350 used for sale

Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Max. welding power: 350 A -Accessories: Welding cable with electrode clamp, ground cable -Quantity: 1 welding machine available -Price: per piece -Dimensions: 390/550/H530 mm -Weight: 56 kg

Technical data of the pallet rack crossbeam: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbeam, used Material color: orange Box profile: 80 x 50 mm Truss Type: PNBH 0488 Agraffe: 4 HK (hook) Weight / piece: approx. 5.38 kg Clear width: approx. 1,350 mm 02x Locking pins, used Execution: complete galvanized To secure the longitudinal members against unintentional lifting Note: - The trusses can also be used in drive-in racking systems. - It is also possible to use the trusses as bracing. General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Groove: 32 mm wide -Square: 95 x 35 mm -Length: 3500 mm -Weight: 70 kg

Control: Cybelec DNC 600S. Inspection by appointment possible.

General SKU293X474 MakeATML LifeSciences LocationBarneveld CEcheck TypeMM-JTBB360 Main Features MaterialStainless steel Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable MaterialStainless steel 1.4404 (316L) With jacketcheck General No.MM-JTBB360-0001 Year of construction2013 Mounted on legsand wheels With switchgearcheck Floorspace1,50x1,0 m Total height1,36 m Weight250 kg Extra SpecificationsWith disposable mix bags, volume 350 l.Fine chemicalsStarchStirring vesselsOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feed ...

General SKU293X475 MakeATMI LifeSciences LocationBarneveld CEcheck TypeMM-JTBB360 Main Features Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable MaterialStainless steel 1.4404 (316L) With jacketcheck General No.MM-JTBB360-0002 Year of construction2013 Mounted on legsand wheels With switchgearcheck Weight250 kg Extra SpecificationsWith disposable mix bags, volume 350 l.Fine chemicalsStarchStirring vesselsOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & p ...

Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

Description Hole punch for saddle stitcher Heidelberg Stitchmaster ST 350 with punching tool radius 5mm (others on request)

General SKU132X770 MakeEberhard Hoesch &: Söhne, Düren TypeGK6/3500/SO No.32 6333 Year of construction1988 LocationBarneveld Main Features MaterialHastelloy Volume3500 Ltr. Motor9.2 KW Specified Features - Stirring vessel Open stirring vessel(1x) Capacity3500 Ltr Vessel sizesdia. 1800x1300mm Dished bottomcheck Flat top sidecheck With covercheck Manhole800x450mm Outletdia. 175mm With jacketcheck With propellor stirrer:Hoesch Gegenstromrührer: With gate type stirrercheck Motor9,2 KW + 7,5 KW, 380/660 Volt Speed mixing shaftvariable (12-49 prop./ 21-87 Rpm gate) MaterialStainless steel 2.4610 (Hastelloy C-4) With jacketcheckFine chemicalsStarchStirring vesselsOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants ...

Melting and holding furnace StrikoWestofen MH II-T 6000/3500 G-eg, built in 2021, heating capacity 2,600 kW, capacity 6,000 kg, melting capacity 3,500 kg/h, max. melting pool temperature 760°C, max. furnace room temperature 1,050°C, height approx. 8,043 mm, with Striko K2000E feeder, built in 2021, with elevator for transport boxes

Doka Floor Props Eurex 30 Top 350 †Reliable Support for Your Construction Site! 🚧 Our used floor props combine strong performance, easy handling, and trusted Doka quality. A great solution for anyone looking for dependable formwork equipment at an attractive price. 👌   🔧 Product Highlights: ✔ High load capacity up to 30 kN. ✔ Adjustable extension length up to 3.50 m [511-116]. ✔ Fast and accurate adjustment thanks to clearly visible hole numbering. ✔ Used, inspected, and ready for immediate use. ✔ Space-saving storage on stacking pallets with 40 props per unit. 📦   📌 Available from stock in Florida, USA With Form-on, you get reliable products for everyday construction needs †fast, straightforward, and fairly priced. 🤝   📩 Contact us today and get your customize ...

Pickle injector / steaker, make Schröder, type NT 350, year 2001, with plastic link belt, width 600 mm

Fluid mixer for tempered mixing with double sheath, 350 l. content (usable volume: 100 l. - 280 l.), outlet sideways, pressure-resistant up to 10 bar, product-contacted parts made of V2A 1.4541; without tools.

Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV B7ssq0vkzj Year of construction : 2012 Condition : New with 1 year warranty Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.

Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Used SACMI OIMA 350T injection molding machine - Year 2010Technical Specifications & Performance DataThis injection molding machine for PET preforms is a high-output cell engineered for beverage production and industrial packaging applications. Manufactured by OiMA, it combines robust clamping performance with precise injection control and a complete set of auxiliaries for reliable second hand operation within a used bottling line context.Manufacturer: OiMA S.p.A.Model: 6500.350Application: PET preform production for beverage packagingClamping force: 350 tonInjection volume: 4500 cm³ per 100 MPaInstalled power: 436.58 kWPower supply: 400 V, 50 HzMachine mass: 20,000 kgPress year: 2014Mold: SACMI PPM 072 H, 72 cavities, 34 g preforms, neck type Alaska Blue PRE 342Year: 2010Mold temperature: 8–12 °CMold mass: 9,720 kgAuxiliaries included: Sytrama REV 156 PET take-out robot; Plastic Sys ...

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

Stick electrodes 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg

Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)

0: ja Working width: 3000 (3500) mm 0: ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table -------------------------------------- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carr ...

Stitching and folding unit MKW SFT 350; Condition as is; suitable for connection to MKW gathering machines or as a stand-alone; 2 Hohner 52/8 stitching heads; folding device; Front cut; 2.Knife; open format 10x14cm to 50x70cm, folded format 10x7cm to 50x35cm. Stitch-fold unit MKW SFT 350; condition as is; used for MKW machines or offline; two stitching heads 52/8; folding unit; front cut; secound knife; open size 10x14cm to 50x70cm, folded size 10x7cm to 50x35cm.

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 610 mm -Length: 3.5 m -Transport dimensions: Ø 220 x 610 mm -Weight: 22 kg

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Demag, compressor control from screw compressor type 350WS -Module: BT SBE 42008 TW-2294V-0 -Individual components: see photos -Dimensions: 395/105/H25 mm -Weight: 0.3 kg

round bar steel: 30 mm square edge steel: 28 mm L-beam: 90 x 8 mm : 150 x 8 mm pressure: 35 t total power requirement: 2,8 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Belt width 350 mm Number of straightening rollers - 11 pcs Diameter 60 mm Capacity 350 x 2.5 mm Motor 4 kW Speed adjustable by variator drive

Punching force: 350 kN (holes e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shear Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side with stop cam Range of tools is included in the price

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

General SKU079B444 MakeAviteq Vibrationstechnik TypeOA-1150/350-UVB No.6300095-001 Mounted on framecheck Specified Features - Vibro feeder Material finishPolished inside Main Features MaterialStainless steel Length1150 mm Width350 mm Specified Features - Vibro feeder Vibro feeder(1x) Feeder width350mm Feeder length1150mm Feeder height275mm Closedcheck Inlet355x355mm With motor0,3 KW, 230/400 Volt (2x) MaterialStainless steel 1.4301 (304) General LocationBarneveld Floorspace1,8 x 0,9 m Total height1,0 m Weight380 kgStarchOther chemicalRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicVibro feedersTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsConsumer wasteAviteqIndustries > Food & Fee ...

pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine: centrifugal pump Manufacturer: Lowara Type: CO 350 / 15 K / A Year of construction: 2008 Q = flow rate: 6-30 m m³/h P2: 1.5 kW H: 16.9-7.2 m Hmin: 7.2 m Maximum working pressure: 8 bar continuous operation Motor, protection class: IP55 Insulation class: F Design: Closed engine with separate ventilation and aluminium alloy finned casing. Equipment: Equipped with silicon carbide / tungsten carbide / FPM seals as standard. Visit us at the factory in arrangement.

Flange ball valve / valve Manufacturer: Böhmer DN 350 Type: 450 PN 16 Model: TEFL 50-350-001 NEW, from stock reversal

Qty. 1 Second-hand extrusion press line Mfc.: 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, Truninger, Ekatech Force: 3500 MT Built: in 1960’s Pressure: 315 bar Billet dia.: 343 mm x 900 mm (can be modified 14 x 1.0 m) Modernisation: 2011 Complete exchange of control system on press to Allen Bradley Control Logix including encoders for Ram, Container and Shear. Change of pump controls to Bosch Rexroth HS4. 2012 Complete change of hydraulic system (excluding pumps). New side cylinders and container cylinders. Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. Modernisation of gas burners in the furnace. 2013 Change of one of the main pumps to Bosch Rexrot ...

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Heating capacity: 10,5 kW Max. Temperature: 350 ° C maximum capacity: 12 ltr. 380 V / 50 Hz protection class IP 54. Pressure vessels: 9 kW 12 bar 4.2 ltr. Max. Operating temperature: 350 ° C Minimum flow rate: 0,4 m³ / h

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

A C H T U N G_____S o n d e r p r e i s ! ! ! TIG Welding Device Manufacturer Artec fully ready for use with all the no-fable lifts. Can also be used as an electrode device. Welding current 350 ampere DC, no alternating current! Weight approx. 200kg Geraet under electricity ready for use Immediately available Lorch Dalex Messergrießheim Cloos Special price

PTC CTR-C cold water trailer similar but no dynajet, oertzen, falch, ROM, Rioned, plaid, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min. at 180bar | Petrol Engine: Honda GX690 17.7kW CTR-C 55/160 | 55l/min. at 160bar | Petrol Engine: Honda GX690 17.7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel Engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel Engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD reel: manually with max. 1/2" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Water tank: 400 l - Op ...

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...

Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.