scm st 350 used for sale

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

Width of the feed carpet 300 mm Max saw blade diameter 350 mm min. cutting length 390 mm variable cutting speed, feed carpet speed adjustable 6-48 m/min Power 25,5 kw 35 hp 35 HP

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

Key data: 5 , 50 , 3147

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

I sell a fully equipped edge banding machine SCM Olimpic S3000, built in 2011: Configuration: Input stop servo motor adjustable Pneumatically adjustable joint milling machines Edge banding with preheating tank Material pressure zone servo motor adjustable Cross-cut saws pneumatically adjustable Strong milling machines can be adjusted manually Pneumatically adjustable radius milling top + bottom Round unit 4-motor pneumatically adjustable Radius puller blade R2 can be switched off pneumatically Surface of the drawing blade Polishing brushes Hot-air blower Separator injection front and rear STARTOUCH control system Control panel Barcode reader Working height servo motor adjustable Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 12m/min. PUR glue possible. Second glue tank brand new included. Only 6,153 meters glued! Machine practically ...

MACHINE IS EXCELLENT CONDITION DAILY WORKING IN THE PRODUCTION , MACHINE WILL BE REPLACED WITH BIGGER NEW MACHINE MACHINE IS AWAILIBLE IMEDIATELY. TECHNICAL DATA IS PRESENT ON PHOTOS WE SHIP MACHINE WORLD WIDE FOR THE CUSTOMERS

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 105 mm -Max. trolley speed 30 m/min -pusher with 6 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Specifications: -cutting length 4500 mm -cutting depth 4300 mm -saw height above the table 115 mm -Max. trolley speed 30 m/min -pusher with 8 pneumatic clamps -3 x 1500 x 600 front shelves coated with bakelite -main saw fi 380 mm -saw motor 7.5 kW – weight 4400 kg -scoring motor 1.5 kW -current consumption 55 A -suction 2 x 120.1 x 150 mm -dimensions 7000 x 8200 x 1700 mm

Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

SPECIFICATIONS: 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 620 mm electronically controlled vert./horizz. 1 vertical profile unit - h 320 mm fixed

SPECIFICATIONS: Compilation: Tenon cutting area 2 vertical tenon cutting units - h 620 mm electronically controlled vertical / horizontal. 1 sawing unit 1 pantograph unit with tool changer magazine 1 workpiece return automated Profiling area 1 Vertical roll forming unit - H 620 mm electronically controlled vertical / horizontal. 1 vertical roll forming unit - h 620 mm electronically controlled vertical / horizontal. 1 vertical roll forming unit - h 620 mm electronically controlled vertical / horizontal. 1 aggregate for fittings 1 glazing bead cutting saw 1 roll forming unit - h 620 mm left Complete with workpiece selection table Workpiece removal and return Tools Documentation

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

SECOND-HAND WORKING CENTER SCM MOD. RECORD 1 - CE RULES - table mm. 2000X800 - year 1996

Inv. Num. : 6870 Type: M950 Producer: SCM Created: 2017 Parameters: Weight: 2200 kg

SECOND-HAND CIRCULAR SAW SCM MOD. SI450 N - carriage mm. 3800 - Cutting width 1270 mm on parallel fence - motor 7.5kw - year 2006 (CE)

SPECIFICATIONS: Number of drill bits: 29 - Quick release Drilling distance mm: 32 Pneumatic operation Vertical/horizontal tilt: 0°-90° Installed capacity: KW 2.2 04 Workpiece clamping hounds With angle drill

Key data: 630 mm, 240 mm, 7 kW

SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation

SCM fs 52es SPIRAL Dressing thickness planer Planing width 520mm Spiral knife shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503502

SCM machining centre model RECORD 220 : - Useful axis stroke 3250 x 1300 x 300 mm - workpiece useful passage 320 mm - 3180 x 1250 mm multifunctional worktop - 3+3 reference stops for pendulum machining - Becker vacuum pump of 250 mc/h - Centralized automatic lubrication - NUM 1040 electronic control, with Alphacam software - machine according to CE standards, with bumpers and perimeter protections - year of production 1998 - Machine weight kg 8100 Operating units: - vertical electrospindle with inverter 900 – 18,000 rpm, ISO30 connection, with 4th VECTOR rotary axis, served by an on-board tool changer 10-position (RAPID 10) - drilling unit with vertical axis with independent control and encoder, and with 39 spindles as follows: 15 vertical spindles on X-axis 14 vertical spindles on Y-axis 2+2 horizontal spindles on X-axis 3+3 horizontal spindle ...

Key data: 5000 mm, 2100 mm, 500 mm

Machining centre with loading and unloading for sheet goods up to 5000 x 2100 mm

Key data: 3000 mm, 900 mm, 200 mm

SPECIFICATIONS: Workspace: X: 3000 mm Y: 900 mm Z: 200 mm Main motor: 9.9 kW 18000 rpm CNC control No tool changer 1 vacuum pump 3 kW 120 m³ 6 positionable bars

THCIKNESS PLANER model SCM S 630 second hand machine CE mark : Yes working conditions : Excellent technical details : useful working width mm. 630 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 20 motorized table positioning with electronic reading pneumatic roller pressure n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50

SCM lab 300p 5-speed station wagon Universal multiple combination Aluminium sliding carriage 3 Tesa planer blade shaft Trimming length 1600mm max. saw blade diameter 315mm with scorer swivelling saw blade Dressing width 300mm Dressing table length 1300mm Thickness table dimensions 300 x 450mm Min./Max. Thickness Height: 3/220mm Motor 50Hz 4kW 400V max. milling tool diameter 160mm Spindle speed: 3600/7500/10,000 rpm Spindle diameter: 30mm Weight 430kg G&STÜ-5500314

SCM C26 genius 4-fold combination machine Planing width 260 Planing shaft: 3-tersa knife shaft Dressing table length: 1040mm Passage height: 3-200mm Format sliding table: 1070mm trimming length Cutting height: 80mm Saw can be swivelled 90°-45° Rigid milling machine 90° Milling machine rpm: speeds of 4200-6300 rpm or 5000-7500 rpm Engine power: 400V 2 hp S1 260mm planing width! G&STÜ-5500027 Fits in any small workshop!

Crawler multirip saw SCM M3 Track width 300mm Cutting height max 120mm Main motor power 25kw Feed speed adjustable on the variator 6-45m/min Disc diameter max/min 350/200mm Minimum element length 600mm 3 rows of anti-recoil pawls Spindle diameter 50mm Sleeve diameter 70mm Central Track Lubrication Extraction spigot 200mm Machine weight 1660kg Machine dimensions 170x150x150cmH Net price

Thicknesser SP 400 Working width 400mm Working height 250mm Electric lifting and lowering of the worktop 4-knife shaft with traditional knives Plough shaft speed 5000r.p.m 4kw main motor Extraction spigot fi120 Machine dimensions 800 x 1000 x 1080mmH Weight 410kg Net price

Key data: 4 , 180 mm, 105 mm

Planing width min max 23 – 180 mm Planing height min max 6 – 105 mm Min workpiece length 300 mm Feed speed 6 and 12 mm Spindle speed 6000 rpm Spindle 35 mm Vertical shaft engine 7.5 kw / 10 hp Horizontal shaft motor 7.5 kw / 10 hp Clamping length of vertical shafts 120 mm Clamping length of horizontal shafts 190 mm Min max tool diameter On vertical shafts 100-120 mm Profiling option without axial adjustment on the vertical shafts Feed rollers D 120 mm Dressing table length 1700 mm Manual lubricant pump included as standard Planer heads Tersa (on request) Suction nozzle D 120 mm 4 pcs. Ce version

Key data: 1350 mm, 3

electronic control - First roller D=250 mm made of grooved steel - Second roller D=320 mm made of rubber - third roller D=? mm made of steel with carpet with button - Pneumatic on/off of the 3 groups - Air purification fan on the 3 bands - Sanding belt 2620 mm - Electronic oscillation of the abrasive belts - Automatic layer positioner - Variable feed speed of the carpet with inverter KW 2.2 - Vacuum conveyor belt - ionization in the outlet

Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300  ...

Key data: 45 °, 3200 mm, 1500 mm

Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm

Key data: 45 °, 3200 mm, 1200 mm

Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable

PART NUMBER 7946 Specifications: - track width 300mm - shaft working width 300mm - max blade diameter 350mm - blade bore diameter 70mm - max cutting height 120mm - table top width with widening 1030mm - table top length 1840mm – in advance: - Flingers (barrier to prevent material from backing up) 2 rows - Slip roller, metal, pressure roller - Flingers - Slip roller, metal, pressure roller - shaft with saws - 2 smooth metal sliding rollers – from below: - guide strip - Flingers - Caterpillar - laser - central track lubrication - infinitely variable feed speed regulation - 1.1kW feed motor - main motor 18.5kW - Diameter of the extraction port 200mm - overall dimensions l/w/h 1900x1800x1600mm - weight 1770kg Advantages: – Italian production – with laser – unpainted – very good condition – used multi-saw Net price: 55900 PLN Net price:  ...

- Spindle 1st dressing with table of 2500mm - Spindle 2. First right spindle - Spindle 3. First left spindle with 2nd axis control (dimension + height + setup) - Spindle 4. Second right spindle with 2nd axis control ( dimension + height ) - Spindle 5. Second Left Spindle with 3 Axis Control ( Dimension + Height + Setup ) - Spindle 6th upper spindle as thickness and profile spindle with 3rd axis control ( dimension + on/off + setup ) - Spindle 7. Lower spindle as cleaning spindle or profile spindle - Spindle 8. Second upper spindle as cleaning spindle or profile spindle - Spindle 9. Second lower spindle as plaster spindle or profile spindle Motors 9 x 7.5 KW 380 V. 50 H. Feed continuously variable 6-36 meters

Code: 0399 Brand: TECNOMAX SCM Model: ST 4 ELITE - CE Standard Saw spindle moulder with tilting blade and scoring unit and tilting spindle moulder for carpentry, furniture, wooden window frames, doors, panels and various - CE Standard Technical data: Squaring carriage length 3200 mm Blade inclination 90-45 degrees Max saw blade diameter with scoring unit mounted 315 mm Max saw blade projection from the table at 90°/45° mm 100/70 Cutting width at parallel guide 1000 mm Scoring unit blade diameter 100 mm Workpiece clamping press Tilting Spindle moulder 90-45° Useful spindle length 125 mm Spindle rotation speed rpm 3500/6000/8000/10000 Max tool diameter 210 mm Tenoning table and head Electrical connection and removable support for the feeding Three-phase motors 5,5 Hp Suction inlet diameter mm 120 Overall dimensions of assembled machine mm 3600 x 3000 x 11 ...

Code: 0400 Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Motor 2 Hp Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Mortising machine: Table dime ...

Code: 0406 Brand: SCM MINIMAX Model: T55 ES - CE Standard Spindle moulder with long table for joinery, furniture, custom-made furniture, wooden joinery, doors, timber structures, plastics, composite materials and various – CE Standard – Year 2023 Technical specifications: Shaft diameter 35 mm Shaft length 125 mm Shaft rotation speed rpm 3500/6000/8000/10000 Max tool diameter 240 mm Motor power 6,6 Hp Spindle unit adjustment handwheels positioned on the front of the machine Gravity indicator on the spindle lifting handwheel Side extensions and telescopic front roller extension for a support of 2500 mm Spindle rotation reversal Spindle speed display by LED lights Adjustable spindle guide Electrical installation for automatic feed Extraction hood inlet diameter 120 mm Overall dimensions mm 2550 x 900 x 1150 h Weight kg 348

SCM Pratix-S 12 B CNC Machine Centres With Flat Table Find more here - / Contact us at -

SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW

Manufacturer: SCM, Type: M 3, Year: 2001, Cutting widht mm: 300, Working hight mm: 120, Power engine kW: 44, Year :1993

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Code: 0440 Brand: SCM MINIMAX Model: FS 41/C - CE Standard 3 Works combined machine (Surface/ Thickness/Mortiser) for wood, carpentry, furniture, window frames , doors, plastics, and various - CE Standard Technical data: Planer shaft with n° 3 Tersa” knives Working width 410 mm Total length of surface tables 2000 mm Guide inclination 90–45° Thickness table dimensions 410 x 605 mm Thickness feed speed 7 m/min Thickness min/max working height 3/230 mm Three-phase motor 6,5 Hp Cast iron mortiser: table dimensions 430 x 220 mm Spindle connection diameter 16 mm Suction port diameter 120 mm Overall dimensions mm 2000 x 1000 x 1100 h Weight kg 340

Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988

Manufacturer: SCM , Year: ca.1995, Control: hand, Number of profile spindle: 1, Tracer: yes, Max. operating height mm: 50, Spindle travel range total mm: 110, Number of milling spindles: 1, Milling spindle kW: ca.1,5, Milling engine rpm: 10000/20000, Grid depth setting: yes, Tracer pin in the table: yes, Number of tables: 1, Table size in mm: 7700 X 900, FREE TEXT: Tischub per Handrad 200 mm/pneumatisch Fusspedal, Year :ca.1995

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001